- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Bitumen rubber / latex compound designed for use in damp proofing applications. Mulseal DP is suitable for uses such as a damp proof membrane to retaining walls, as a vapour barrier to panels and repairing fine cracks in asphalt surfaces.
- Suitable for use on most building materials such as concrete, brickwork, metals and stone.
- Complies with DTp Specification for Highway Works May 2005 series 2000 clause 2004.
Please Note: 200L Pack size is only available on a 5-7 working day delivery service
Description
Quick Links - Click To Jump To Section:
Features & Benefits
- Excellent adhesion to most common building materials
- Low water vapour permeability
- Can be applied to “green” concrete
- Resistant to sulphates and ground salts
- Dries to a flexible film
- Simple to apply by brush or squeegee
- Complies with DTp Specification for Highway Works May 2005 series 2000 clause 2004
Uses
- Designed for use in damp proofing applications
- Suitable for uses such as a damp proof membrane to retaining walls
- As a vapour barrier to panels and repairing fine cracks in asphalt surfaces
- Suitable for use on most building materials such as concrete, brickwork, metals and stone
- May be used on damp surfaces, provided that no free water is present
- Can also be applied to “green” concrete immediately shuttering has been struck
Application Notes
- Easily applied by brush or squeegee
- Where it is used as a sandwich membrane in floors, Mulseal DP should have continuity with the damp courses
- Metal and timber surfaces should be dry and primed with one coat of Fosroc Primer B2
- All other surfaces should be primed with a coat of a 1:1 mixture of Mulseal DP and water
- For most purposes two full coats should be considered a minimum requirement
- Supplied ready for use. If, however, after thorough agitation the product appears unduly thick it can - as an exception - be thinned with not more than 0.25 litre of clean water per 5 litres of Mulseal DP
- Splashes of Mulseal DP on paintwork, etc, should be wiped off at once with a damp cloth. Cured material can only be removed mechanically
- Coverage rate typically 1.1 - 2.1 m²/litre per coat, but will depend upon the nature of the surface being treated
- Drying time 4 to 6 hours. 24 hours should be left between coatings. Mulseal should not be applied in enclosed spaces unless there is adequate circulation of air to allow for evaporation of water
- Application temperature: 5 to 50°C
Limitations
- Protect from frost during storage
- Mulseal DP is damaged by freezing
- Mulseal DP should not be used if rain or frost is expected, but frost will not affect the dried film
Product Details
7923-912183
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- concrete, brickwork, metals and stone
- Application Method
- Brush, squeegee
- Sheen
- Flat
- Single, Two or Three Pack
- Single
- Product Certifications
- DTp Specification for Highway Works May 2005 series 2000 clause 2004
- Pack Size
- 25L, 200L
- Coverage
- Typically 1.1 - 2.1 m²/litre per coat, but will depend upon the nature of the surface being treated
- Compatible Primers
- Fosroc Primer B2 (Metal and timber)
- Max. Application Temperature
- 50°C
- Min. Application Temperature
- 5°C
- Density
- 1.00 kg/litre
- Solids by Volume
- 60%
- Drying time
- 4 to 6 hours
- Colour(s)
- Black
- Base Type
- Water-Based
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Brick
- Suitable For Use On
- Stone
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Squeegee
- Manufacturer
- Fosroc
- Usages
- Below Ground Waterproofing
- Product Usage Type
- Membrane
- Colour Family
- Black
- Seasonal
- Cold Weather
Questions
Question about the product
 Manni on 2023-05-31 10:07:25 | Question: Hi I have 24 box of fosroc mulseal dp left on my job i would like to sent it back for half price if u intrested and they are in Cardiff |
Answer from Rawlins’ Technical Team: Assuming these items have been purchased from Rawlins Paints please contact [email protected] with your order reference and we can see what we can do. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Mulseal DP is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
