- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Fosroc Thioflex 555 is a two component, polysulfide self-levelling type sealant designed to meet requirements in pavement applications.
- Retains movement accommodation of 35% on butt joints through temperature extremes
- Ideal for the sealing and maintenance of joints in concrete roads, concrete runways and hard standings
- Also available in machine applied grade for ultra fast, safe application
Please note: Colours shown are for illustrative purposes only
Quick Links - Click To Jump To Section:
Features & Benefits
- Also available in machine applied grade for ultra fast, safe application
- High extrusion rates
- Rapid return to service
- Fuel and hydraulic fluid resistance
- Jet blast resistance
- Polysulfide - high stress relaxation
- High resilience
- Resistant to stone / dirt pickup
- High durability and long service life
- High movement accommodation
- Retains movement accommodation of 35% on butt joints throughout temperature extremes. It does not harden in cold weather nor become excessively soft in hot conditions
- Please refer to the Product Data Sheet for full details of:
- Properties
- Specification Clause
- Standards Compliance
- Product Installation
- Estimating
- Storage
- Health and Safety
- Design Criteria
Application Notes
- Hand Grade: Mix thoroughly for approximately 3 minutes using a slow speed drill (300 to 500rpm) fitted with a Fosroc Sealant Mixing Paddle (5L pack)
- The mixed product may be poured directly from the tin into horizontal joints, or for application to horizontal joints less than 15 mm wide may be loaded into a Fosroc ‘G’ Gun for application
- When necessary, clean equipment with Fosroc Equipment Cleaner; ensure any mixed material is cleaned immediately after use. Cured material can only be removed mechanically
- Prime concrete joint faces with Fosroc Primer 7E
- Coverage dependant on joint size. Refer to "Guide to sealant qualities" in the Product Data Sheet for rates
Limitations
- Apply at substrate temperatures of minimum 5°C and rising. Material temperature should be in the range 15-40°C
- Do not apply direct heat to product
- Product is not compatible with bituminous surfaces
- Where product could come into contact with pavement asphalt, or when sealing trafficked joints >50mm wide at the time of installation please contact 0113 2455450 (option 2) or send a message to [email protected]
- For the sealing of industrial floor joints, higher modulus sealants such as Nitoseal MS300 or Nitoseal PU800 are recommended
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete
- Application Method
- Pour, Sealant Gun
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 30L, 400L
- Mixing Ratio
- Hand Grade: Preweighed units
- Coverage
- Dependent on joint size. Refer to Product Data Sheet
- Max. Application Temperature
- 50°C
- Min. Application Temperature
- 5°C
- Specific Gravity
- At 20°C: Base 1.36 - 1.44 Hardener 1.68 - 1.76
- Colour(s)
- Grey (Base White, Hardener Black)
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Application Method
- Sealant Gun
- Application Method
- Pour
- Manufacturer
- Fosroc
- Usages
- Road & Pavement Sealants
- Product Usage Type
- Sealer
- Product Range
- Thioflex
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Thioflex 555 Hand Grade is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT