- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Fosroc Nitoprime Zincrich Plus is the recommended anti-corrosion primer for exposed steel reinforcement for use with Fosroc concrete repair mortars.
- Fully compatible with all Renderoc mortars and fluid micro-concretes
- Complies with LU Standard 1-085 ‘Fire Safety Performance of Materials’. BS EN 1504-7: Reinforcement corrosion protection method 11.1
Nitoprime Zincrich Plus is the approved reinforcing steel primer for use with the Renderoc, Patchroc, Paveroc and Nitomortar systems of concrete repair.
Quick Links - Click To Jump To Section:
Features & Benefits
- ‘Active’ zinc-rich system combats corrosion by electrochemical means
- Formulated for use with Renderoc repair products
- Single component product — easy to use with no restrictive pot-life
- Economical - single component ensures almost no waste
- Complies with LU Standard 1-085 ‘Fire Safety Performance of Materials’
- BS EN 1504-7: Reinforcement corrosion protection method 11.1
- Supplied as a single component grey-coloured liquid based on metallic zinc, in 800ml and 1.9L cans
Application Notes
- Steel should be cleaned to a minimum of ST3 standard prior to application
- Applicable by brush
- The application of concrete repair materials may proceed as soon as the product is touch dry (generally 1 hour @ 20°C)
- The minimum application temperature is 5°C
- Should be removed from tools, equipment and mixers with Fosroc Solvent 102 immediately after use
- Coverage rate: 8 m²/litre
Note: this coverage figure is theoretical — due to wastage factors and the variety and nature of possible steel substrates, practical coverage figures will be reduced. At temperatures below 20°C, the drying times will be slower.
Limitations
- Should not be applied when the temperature is below 5°C or is 5°C and falling
- This product is flammable. Keep away from sources of ignition. No smoking. In the event of fire, extinguish with CO2 or foam. Do not use a water jet
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- Application Method
- Brush
- Single, Two or Three Pack
- Single
- Pack Size
- 800ml, 1.9L
- Touch Dry (at 20°C)
- 1 hour
- Dry to Recoat (at 20°C)
- 2 hours
- Coverage
- 8 m²/litre
- Recommended Thinner/Cleaner
- Fosroc Solvent 102
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- Recommended Dry Film Thickness
- 40 micron
- Recommended Wet Film Thickness
- 100 micron
- UN Number
- UN1263
- Specific Gravity
- 2.5
- Flashpoint
- 41°C
- Colour(s)
- Grey
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Application Method
- Brush
- Manufacturer
- Fosroc
- Usages
- Corrosion Resistance
- Product Usage Type
- Primer
- Product Range
- Nitoprime
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Nitoprime Zincrich Plus is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Fosroc Solvent 102
Fosroc Solvent 102 is a cleaning solvent for use with the Fosroc range of products.
Fosroc Paveroc
Fosroc Paveroc is a high performance reinstatement mortar for the reinstatement or resurfacing of large areas of concrete pavements, ramps and floors to avoid the full depth replacement of bays. May be used internally and externally including areas subject to heavy trafficking Suitable for repair methods 3.1, 3.2, 4.4, 7.1, 7.2 as defined...