- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Contains all of the products and application tools required to ensure a high quality finish on uPVC windows, doors, fascias, and composite doors.
Technispray Kolorbond Aquatek is a water-based, low-odour, quick-drying exterior and interior coating for PVCu (uPVC). Available here in Anthracite Grey (RAL 7016) (looking for a lighter or darker grey? Pick one of our 12 trending shades of grey here) and also available in 2400+ colours from British Standard, NCS and RAL with an attractive smooth, satin finish. Can also be colour matched to nearly any colour.
- Available in 4 pack sizes to suit the size of your project see 'Paint Kit Contents'
- Colour fast - Utilises proven light fast pigments - Excellent exterior weathering properties
- Very good adhesion - Good hardness and scratch resistance
- 10 year adhesion guarantee - 5 year colour fastness guarantee
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- Manufacturer
- Technispray
- For Use By
- Industrial Use
- For Use By
- Professional Use
- Water / Solvent Based
- Water
- For Use On
- uPVC, Hard Plastics, Powder Coatings, GRP, Wood, Composite Doors
- Sheen
- Satin
- Single, Two or Three Pack
- Single
- Pack Size
- 5m² Pack
10m² Pack
15m² Pack
20m² Pack - Application
- Brush, Spray
- Recommended Thinner/Cleaner
- Water
- Min. Application Temperature
- 10°C
- VOC
- Ultra-Low (5-49 g/l)
- Finish
- Smooth
- Hard Dry
- 24 hours
- Flash Time (Between Coats)
- 15 minutes
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- GRP Glass-Reinforced Plastic
- Suitable For Use On
- Composite
- Suitable For Use On
- Wood
- Suitable For Use On
- Hard Plastics
- Suitable For Use On
- UPVC
- Finish
- Smooth
- Finish
- Satin
- Application Method
- Spray
- Application Method
- Brush
- Manufacturer
- Kolorbond
- Colour Family
- Anthracite Grey
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Kolorbond Anthracite Grey uPVC Painting Kits is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Kolorbond WindowPrep
Alcohol-based colourless cleaner. For use on uPVC surfaces. Professional use only.
Kolorbond Aquatek
4,900+ Colours. Single-pack water-based satin coating for interior and exterior use. For uPVC, hard plastics, polyester powder coatings, GRP, and primed wood. Resistant to scratches and weather. Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour....
Kolorbond VinylKleen
Water-based cleaner for PVC and uPVC. Removes contaminants, silicones and oils. To be mixed with water. More Information Delivery Info
Kolorbond KolorFlow
For use with Kolorbond Aquatek to avoid leaving brush marks or to keep a ‘wet edge’ on a warm day. Stir in 10% of KolorFlow (maximum 20%). This will slow the drying of the paint and assist leveling. The addition of KolorFlow also assists when spraying in hot weather. More Info Delivery Info