- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- In Black or Aluminium.
- Heat-resistant spray for engines, heat cannons, pipes, vents, barbecue grills, fireplace equipment, and space heaters.
- Resistant to consistent temperatures up to 650°C.
- Dry to handle in 3 hours.
- Lead and chromate-free formulation, ensuring safer use.
- Guaranteed high performance with a minimum shelf life of 3 years in unopened cans.
Description
Rust-Oleum Heat Resistant Paint 750°C Aerosol
Rust-Oleum Heat Resistant Paint is a premium-quality solution designed to provide superior protection for metal surfaces exposed to high temperatures. This single-pack aerosol spray is available in black and aluminium, offering robust performance for both continuous and peak heat exposures. Formulated with silicone-modified alkyd resin, it ensures a durable and long-lasting finish.
Application and Use
The heat-resistant spray is perfect for use on a variety of metal surfaces including engines, heat cannons, pipes, vents, barbecue grills, fireplace equipment, and space heaters. It is particularly effective on new, bare steel, blasted steel, or light rusted steel surfaces. It can also be used for small maintenance jobs or touch-ups on painted substrates.
- Ensure surfaces are clean and dry before application.
- Shake the can vigorously for at least one minute before use.
- Hold the can approximately 30 cm from the surface and spray in a back-and-forth motion.
- Apply several thin layers at intervals of a few minutes to achieve the best coating thickness.
Performance and Durability
This aerosol spray offers excellent heat resistance, enduring continuous temperatures up to 650°C and short-term peak temperatures up to 750°C. It is touch dry within an hour and can be handled after 3 hours at 20°C. For optimal performance, gradually heat the coating to 150°C (maximum 50°C/hour) for full curing.
Safety and Precautions
This product is designed for consumer, professional, and industrial use. However, users should follow safety precautions during application:
- Wear appropriate eye and face protection.
- Use only in well-ventilated areas or outdoors.
- Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
- Do not spray on an open flame or other ignition sources.
- Protect from sunlight and do not expose to temperatures exceeding 50°C.
- Dispose of contents and container in accordance with local, regional, national, and international regulations.
Recommended Products
For optimal results, consider using other compatible products from the same range. Always refer to the downloadable data sheet for more detailed information.
Health and Safety
- UN Number: 1950
This product is classified as extremely flammable and may cause serious eye irritation and drowsiness or dizziness. It contains hazardous ingredients like acetone and n-butyl acetate. Always handle with care and refer to the Safety Data Sheet (SDS) for detailed safety information.
Product Details
8017-914718
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Bare Metal
Blasted Metal - Application Method
- Aerosol
- Sheen
- Satin
- Colour
- Standard / Ready Mixed
- Pack Size
- 500ml Aerosol
- Dry to Handle (at 20°C)
- 3 hours
- Dry to Recoat (at 20°C)
- Within 1 hour or after 48 hours
- Recommended Thinner/Cleaner
- Clean Equipment or Spill With Rust-Oleum Thinners 7301
- Heat Resistance (up-to)
- 750°C
- VOC
- 650 g/L
- Shelf Life (from date of manufacture)
- 2-3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 1 hour
- UN Number
- UN1950, UN1263
- Consumption
- 2 m² per spray can at 25 µm dry
- Colour(s)
- Standard Colours
- Suitable For Use On
- BBQ
- Suitable For Use On
- Exhausts
- Suitable For Use On
- Vents
- Suitable For Use On
- Space Heaters
- Suitable For Use On
- Boiler Fittings
- Suitable For Use On
- Heat Cannons
- Suitable For Use On
- Fireplace Equipment
- Suitable For Use On
- Engines
- Suitable For Use On
- Pipes
- Suitable For Use On
- Blasted Metal
- Suitable For Use On
- Bare Metal
- Finish
- Satin
- Application Method
- Aerosol
- Manufacturer
- Rust-Oleum
- Usages
- Heat Resistance
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Black
- Colour Family
- Aluminium
- Heat Resistance
- Up To 750°C
Questions
Question about the product
Gillian O'Brien
on
2023-02-13 15:29:10
| Question:
Could this paint be used to spray onto night storage heaters, or is there a better product for storage heaters?Thank you |
Answer from Rawlins’ Technical Team:
Rust-Oleum Heat Resistant Paint 750°C is a matt finish only available in Black or Aluminium colours. Rust-Oleum CombiColor Original will take a temperature up to 90°C and is available in many RAL, NCS or BS colours in a satin or gloss finish. As we don’t know what actual surface temperature the storage heater will get up to we can’t say for sure if the paint will be OK on any particular storage heater, it could depend on the model, type etc. You will need to check with them manufacturer to find out what the surface temperature of their particular heater will get to during use. If it is below 90°C then Rust-Oleum CombiColor Original could be used. Please note this is a solvent based coating, designed for industrial use, as such it will give of odours during application, curing and the first heat cycles. | |
|
C Gary Houseman
on
2023-01-21 22:54:34
| Question:
Can I just confirm if this product be used on a car exhaust and if so can it be used on the catalytic converter as well as the silencer. |
Answer from Rawlins’ Technical Team:
This can be applied on new, bright or shot-blasted steel or well pre-treated coated surfaces such as barbecues, boiler fittings, hot air cannons or exhausts. it is intended for small maintenance jobs and repairs, providing protection up to a dry heat of 750°C (short term peak load) for applications indoors or in a sheltered outdoor environment. Assuming this is to be used on an exhaust under a vehicle we would not recommend it for this application. | |
|
Tom
on
2022-11-17 19:00:12
| Question:
How do you suggest you get the heat gradually up to 150degrees to fully cure it. I am hoping to paint brake disc hubs? |
Answer from Rawlins’ Technical Team:
Unfortunately we do not have a product to recommend for this application to brake discs. This product is suitable for applications indoors or in a sheltered outdoor environment. | |
|
Michael
on
2022-08-24 11:56:44
| Question:
Do the painted surfaces with the paint need to be heat cured once the paint is dry or not. If the paint is needed to be cured then at what temperature and for how long. |
Answer from Rawlins’ Technical Team:
Yes, the paint will be fully cured 24 hours after the minimum service temperature of 150°C has been reached. Gradually heat the coating to 150°C (max. 50°C/hour). | |
|
Paul Bradley
on
2022-06-21 20:27:27
| Question:
Can this paint be used on aluminium. If so what preparation. If not, what product can be used on aluminium. |
Answer from Rawlins’ Technical Team:
Assuming the aluminium is bare, sanded, clean, dry, sound and prepared as detailed in the technical data sheet this can be applied to aluminium. | |
|
W Lee
on
2022-05-26 22:55:15
| Question:
Can this be used on a barbeque cast iron grille and is it food safe? |
Answer from Rawlins’ Technical Team:
Unfortunately this is not food safe and should not be used on anything in direct flame contact. | |
|
Marc burnett
on
2022-05-26 13:25:53
| Question:
Hi does this paint need to be baked on after spraying, as i dont like the idear of putting the items in our household oven! Thanks, marc |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, unfortunately we do not have a product we can recommend for application to an oven. | |
|
Mark
on
2022-05-03 15:59:23
| Question:
Can this be used on stainless steel motorcycle exhaust headers and would a primer be required? |
Answer from Rawlins’ Technical Team:
Stainless steel would need to be abraded first to aid adhesion, the product will then withstand Standard 600°C (dry heat) / Short term peak 750°C (dry heat). But please note this is only suitable for internal applications or those in a sheltered outdoor environment. | |
|
Jen
on
2022-01-27 17:50:37
| Question:
Hi, Can this be used safely on stove top drip pans? Thank you! Jen |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, unfortunately we do not have a product we can recommend for this application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum Heat Resistant Paint 750°C Aerosols is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Rust-Oleum 7301 CombiColor Thinner
A clear liquid thinner, ideal for use on the Rust-Oleum CombiColor product range. Provides good thinning properties for various applications. Specially formulated for air-atomised spraying CombiColor topcoats.
Price
£14.36
(incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£25.93
(incl. VAT)
In Stock and Available for Delivery