- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Osmo Garden Colour is an extremely weather-resistant and UV-stable, opaque satin wood finish for the exterior that is breathable and water repellent.
Best suited for all exterior wood including timber cladding, balconies, window shutters, fencing, pergolas, garden sheds, garden furniture and carports. The dried finish is safe for humans, animals and plants. Typical application is 2 coats, or one coat of Primer (Exterior) (available separately on special order) plus one top coat of Garden Colour on white or light colours.
Product customisation
Don't forget to save your customization to be able to add to cartOpaque wood finish in a multitude of colours – ideal for the exterior!
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Methods of Application
- Notes
- Recommendations for Wood Species
Features & Benefits
- Extremely weather-resistant and UV-stable
- Breathable and water repellent
- Dried finish is safe for humans, animals and plants
Surface Preparation
Wood surface must be clean, dry and frost-free (outside temperature min. 5℃, moisture content max. 18%). Osmo Garden Colour is ready to use. Do not thin. Stir well. If possible, please apply first coat to all sides before installation. Clean and sand old intact finishes – remove any damaged finishes (sand away). Always wear a dust mask while sanding. If additional protection against blue stain, rot and insects is desired, treat raw wood with WR Base Coat – if possible on all sides.
The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Methods of Application
With Osmo Flat Brush or Osmo Microfibre Roller, apply to clean dry wood thinly and quickly lap for lap with the grain or in a spray application. Leave to dry for 3-4 hours under good ventilation. After drying, fine sanding between coats as needed. Apply the second coat also thinly and evenly. If possible, apply the first coat to all sides prior to installation. For renovations, one coat is usually sufficient.
Notes
Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. The oils and resins in exotic wood species and certain hardwoods (Oak, Locust, Larch, etc.) must weather away prior to application. This makes the wood absorbent and the wood finish bonds optimally.
Recommendations for Wood Species
Recommended:
- Oak
- Beech
- Ash
- Alder
- Birch
- Thermowood and Thermally Modified Timber (TMT): prone to grey very fast and therefore application is recommended within the first two weeks after processing
Also Recommended:
For the following wood types, WR Base Coat is recommended before use.
- Pine
- Spruce
- Accoya
- Kebony
Recommended After Weathering Period:
For the following wood types, a weathering period is recommended. Depending on wood species, new or freshly sanded wood requires up to 12 weeks (approximate) exposure to the exterior elements before application.
After the weathering period, it is generally recommended to clean the surface from the extractive content. Osmo Wood Reviver Power-Gel can be used to refresh the colour of the wood. If necessary and before application, de-grease the dried surface with Osmo Brush Cleaner and Thinner (degreaser), always trial apply!
For all other ingredient-rich hardwood species not mentioned may require a varied period of exposure. Contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] for further information.
- Sapele: 2 – 4 weeks exposure
- Rosewood: 4-6 weeks exposure. However, Natural Oil Woodstain 727 Rosewood is optically suitable and requires a weathering period of approx. 12 weeks before use of Natural Oil Woodstain
- Douglas Fir: 6 weeks exposure. Application of WR Base Coat is also recommended
- Larch: 6 weeks exposure. Decking-Oil 009 Larch is optically suitable. Application of WR Base Coat is recommended before use
- Cedar: 12 weeks exposure
- Iroko: 12 weeks exposure
- Mahogany: 12 weeks exposure
- Teak: 12 weeks exposure
- Tropical Walnut: 6-8 weeks exposure
- Merbau: 12 weeks exposure
- Ipe: 6-8 weeks exposure. Decking-Oil 006 Bangkirai is optically suitable and a very popular choice of colour tone
- Pressure-Impregnated Pine: 12 weeks exposure
- Garapa: 12 weeks exposure. Decking-Oil 013 Garapa is optically suitable
- Balau: 12 weeks exposure. Decking-Oil 006 Bangkirai is optically suitable and a very popular choice of colour tone
- Bangkirai: 12 weeks exposure. Decking-Oil 006 Bangkirai is optically suitable and a very popular choice of colour tone
- Massaranduba: 12 weeks exposure. Decking-Oil 014 Massaranduba is optically suitable and a very popular choice of colour tone
Not Recommended:
- Green Oak: moisture content is often above the maximum 20% recommended
- Idigbo: contains yellow dyes which leaches when the wood becomes wet and stains when in contact within iron
- Other woods treated with a varnish, lacquer or other surface coatings must be completely sanded before use
Data sheet
- Manufacturer
- Osmo
- For Use By
- Consumer Use
- For Use On
- Oak
Pine
Rosewood
Sapele
Spruce
Sycamore
Teak
Thermally Modified Timber (TMT)
Thermowood
Walnut - For Use On
- Exterior Wood
Timber Cladding
Balconies
Window Shutters
Fencing
Sheds
Garden Furniture
Carports
Pergolas - For Use On
- Accoya
Alder
Ash
Balau
Bangkirai
Beech
Birch
Cedar
Douglas Fir
Garapa
Ipe
Iroko
Kebony
Larch
Mahogany
Massaranduba
Merbau - Application Method
- Brush
Roller
Spray - Sheen
- Satin
- Pack Size
- 750ml
- Coverage
- 16m² per Litre
- Recommended Thinner/Cleaner
- Soap and water
- Min. Application Temperature
- 5°C
- Drying time
- 3-4 hours
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Suitable For Use On
- Garden Fences
- Suitable For Use On
- Timber Cladding
- Suitable For Use On
- Carports
- Suitable For Use On
- Balconies
- Suitable For Use On
- Wooden Fencing
- Suitable For Use On
- Wooden Garden Furniture
- Suitable For Use On
- Garden Sheds
- Suitable For Use On
- Pergolas
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Osmo
- Product Usage Type
- Wood Finish
- Type of Wood Finish
- Wood Paint
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Black
- Colour Family
- White
- Wooden Surfaces
- Balau
- Wooden Surfaces
- Rosewood
- Wooden Surfaces
- Bangkirai
- Wooden Surfaces
- Sapele
- Wooden Surfaces
- Beech
- Wooden Surfaces
- Spruce
- Wooden Surfaces
- Birch
- Wooden Surfaces
- Sycamore
- Wooden Surfaces
- Cedar
- Wooden Surfaces
- Teak
- Wooden Surfaces
- Douglas Fir
- Wooden Surfaces
- Thermally Modified Timber (TMT)
- Wooden Surfaces
- Garapa
- Wooden Surfaces
- Thermowood
- Wooden Surfaces
- Walnut
- Wooden Surfaces
- Ipe
- Wooden Surfaces
- Iroko
- Wooden Surfaces
- Kebony
- Wooden Surfaces
- Larch
- Wooden Surfaces
- Mahogany
- Wooden Surfaces
- Massaranduba
- Wooden Surfaces
- Accoya
- Wooden Surfaces
- Merbau
- Wooden Surfaces
- Alder
- Wooden Surfaces
- Oak
- Wooden Surfaces
- Ash
- Wooden Surfaces
- Pine
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Osmo Garden Colour is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Osmo Decking-Oil
Osmo Decking-Oils meet the demands of wooden decking with a variety of colours and unsurpassed durability for all weather conditions. Protect and maintain timber, decking, garden furniture and privacy screens made of numerous coniferous and fine woods. Also suitable as a transparent colour treatment of Teak, Eucalyptus and other fine woods...
Osmo WR Base Coat
Osmo WR Base Coat, a wood preservative for amateur use against wood rotting fungi, wood staining fungi and wood destroying insects on all outside wood which is out of direct ground contact and/or surface water. Extremely water repellent - Resistant to blue stain, rot and insect attack Reduces wood swelling and shrinkage - No future...
Osmo Wood Reviver Power Gel
For refreshing greyed exterior wood surfaces. Ideal for decking, timber cladding, garden furniture and similar surfaces. Restores the tone of unweathered wood. Odourless and biodegradable. Easy to apply – especially on vertical surfaces. Removes grey patina. Also part of the Osmo Garden Furniture Maintenance Kit. Larger sizes...
Osmo Natural Oil Woodstain
Osmo Natural Oil Woodstain, a decorative, oil-based protective finish for all exterior use, available in 17 wood shades and tintable in RAL and NCS colours. The microporous, breathable finish allows the wood to breath and reduces the risk of swelling and shrinkage. Base and top coat in one finish - Fast drying - Natural wood grain remains...
Osmo Brush Cleaner & Thinner
Osmo Brush Cleaner and Thinner, a premium quality brush cleaner and thinner that is more effective than cheaper alternatives at cleaning and thinning solvent-based products. Effective at cleaning solvent-based products from brushes and rollers Helps promote longevity of the bristles and fibres of brushes and rollers Perfect for removing...
Osmo Primer Exterior
Osmo Primer Exterior is suitable for any exterior wood for which a white finish is desired before installation. Ideal for timber cladding, wooden rafters and purlins, roof soffits, gables, balconies, fencing, pergolas, garden sheds, carports and other dimensionally stable and unstable elements. Ideal for the first coat before installation,...