- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 2,600+ colours.
- Smooth gloss enamel coating.
- For wrought iron, radiators, fridges, cars, bikes, boats, trailers, fences, railings, engines, spades, and tools.
Product customisation
Don't forget to save your customization to be able to add to cartCoo-Var Hammercote Smooth Finish - Special Colours
This single-pack smooth enamel coating delivers a glossy, fast-drying finish that’s ideal for a wide range of metal applications. Available in vibrant colours including red, yellow, blue, green, black, white, silver, and gold, it provides excellent coverage and protection for metal surfaces. Whether you’re coating wrought iron fences, radiators, car parts, or tools, this product ensures a smooth and durable finish with minimal drying time.
Key Features
- Fast drying time, making it ideal for projects where quick recoat or handling is required.
- High-gloss finish that adds both protection and visual appeal to metal surfaces.
- Available in a wide range of colours to suit your specific needs.
- Durable and long-lasting protection against weather and wear.
- Formulated for use on a variety of metal objects, from radiators and fences to tools and cars.
- Suitable for both brush and spray applications, providing versatility in application methods.
Application Recommendations
This enamel coating can be applied directly to prepared metal surfaces. For the best results, ensure the metal is clean, dry, and free of rust or contaminants. Blast cleaning is recommended for a smooth surface; however, mechanical cleaning can also be effective. When applying by brush, use a brisk, thin coat, followed by a full coat for even coverage. If using a spray method, thin the product as needed for consistency and apply a mist coat followed by a full coat.
Surface Preparation
Ensure all surfaces are clean and free from grease, oil, dust, and rust. For optimum results, blast cleaning to SA 2½ is recommended. In cases where this is impractical, mechanical cleaning methods can be employed. However, be aware that hand cleaning may not achieve the desired level of preparation. Special attention should be given to corners, welds, and other intricate areas during cleaning.
Limitations and Recommendations
This product should not be used on surfaces that are not thoroughly cleaned or prepared. Avoid using in conditions of low temperature or high humidity, as this will impact drying and overall performance. Always apply in well-ventilated areas and ensure adequate drying times between coats. Do not apply over previously painted surfaces unless they are thoroughly cleaned and sanded. Refer to the downloadable datasheet for full details on preparation and application techniques.
Health and Safety
- UN Number: 1263
Flammable liquid and vapour. Causes skin irritation and may be harmful to aquatic life with long-lasting effects. Always use protective equipment when handling and avoid inhaling spray mist. For more detailed safety information, please refer to the downloadable safety data sheet.
Data sheet
- Manufacturer
- Coo-Var
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Metal
- Application Method
- Brush, Spray
- Sheen
- Gloss, Satin
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Parts
- One
- Base Type
- Enamel
- Application
- Brush, Spray
- Touch Dry (at 20°C)
- 30 Mins
- Coverage
- 10m² per litre
- Recommended Thinner/Cleaner
- Thinners 15
- Touch Dry
- 30 Mins
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal
- Suitable For Use On
- Steel
- Suitable For Use On
- Machinery
- Suitable For Use On
- Ironwork
- Suitable For Use On
- Cast Metal
- Suitable For Use On
- Instruments
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Spray
- Usages
- Atmospheric
- Product Usage Type
- Topcoat
- Product Range
- Hammercote
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Stone
- Colour Family
- Anthracite Grey
- Product Type
- Urethane Modified Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 30 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Coo-Var Hammercote Smooth Finish - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...