- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
2-pack solvent-free high-build epoxy resin system in 4,400+ colours that offers shorter drying times in lower temperatures or when a fast return to service is required, for application as a heavy duty floor coating for concrete, steel and other substrates.
- Readily available standard colours also available here
- Available in Smooth and Anti-Slip* options
- *250 micron grade of 508 Anti-Slip Additive will be added at 2.4% prior to receipt
- Low odour
- Very good chemical resistance
- Excellent adhesion to concrete and steel
- Tough and durable
- Available in 'smooth' and 'anti-slip' options
- Can be applied between 5°C - 25°C
- Hygienic and easily cleaned
- Light foot traffic access after 4 hours @ 20°C (minimum)
- Images are for illustrative purposes only and may differ from the actual product
- This product is for Professional Use Only
Ordering References | Weight | Min. Order Quantity |
---|---|---|
RAL Classic and BS4800 Colours | 5KG | 10 |
RAL Classic and BS4800 Colours | 15KG | 4 |
BS381C, RAL Design, NCS | 5KG | 15 |
BS381C, RAL Design, NCS | 15KG | 5 |
Product customisation
Don't forget to save your customization to be able to add to cart304 WG HD Epoxy Floor Coating is a fast curing two-pack solvent-free high-build epoxy resin system that offers faster drying times in lower temperatures or when a fast return to service is required, for application as a heavy duty floor coating for concrete, steel and other substrates.
304 WG HD Epoxy Floor Coating is supplied as a two-pack system, comprising pre-weighed amounts of base and curing agent. After mixing, an easily applied chemical and abrasion resistant finish is produced with fast curing characteristics to which anti-slip aggregate can be added if required (see ‘Slip Resistance’).
This product is for Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Slip Resistance
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- Fast Curing
- Two-pack
- Solvent free
- Low odour
- Very good chemical resistance
- Excellent adhesion to concrete and steel
- High build
- Tough and durable
- Easily applied
- Hygienic and easily cleaned
- Slip resistant options
- Wide range of colours
Typical Properties
Technical Data | |
---|---|
304 WG HD Epoxy Floor Paint | |
Pot life @ 20°C: | 25 Minutes |
Pot life @ 10°C: | 50 Minutes |
Coverage: | 0.25-0.30kg/m²/coat |
Tack free time @ 20°C: | 2 hours |
Hard dry time@ 20°C: | 4 hours |
Full chemical resistance @ 20°C: | 7 days |
Adhesion strength to concrete: | 3.9 MPa (concrete failure) |
Adhesion strength to mild steel: | >12 MPa |
Chemical Resistance | |
---|---|
Chemical | Resistance |
Dilute Alkalis | Excellent |
Dilute Acids | Excellent |
Oil | Excellent |
Petrol | Excellent |
Diesel | Excellent |
Vegetable Oils | Excellent |
Raw Sewage | Excellent |
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Slip Resistance
Should a non-slip finish be required, 508 Fine Particle Anti-Slip Additive can be added to the coating during mixing prior to application to produce an even and easily cleanable texture to the dried surface.
Alternatively the 'Anti Slip' option can be selected when purchasing the product and the 250 micron grade of 508 Anti-Slip Additive will be added at 2.4% prior to receipt.
- 5kg unit - add 200g
- 15kg unit - add 600g
Alternatively, if a more aggressive anti-slip finish is required 504 Standard Anti-Slip Additive or 505 Large Anti-Slip Additive can be scattered onto the first coat of 304 WG HD Epoxy Floor Coating whilst still wet (Full broadcast at approximately 2kg/m² or a partial scatter at 0.5kg/m²). The following day any excess aggregate may be swept from the surface using a clean brush prior to application of the second coat to ‘sandwich’ the anti-slip additive.
NOTE: For our ultimate slip resistance see 502 HD Anti-Slip Coating.
The above recommendations must only be used as a general guideline as the slip resistance of a cured resin coating can vary considerably due to many factors including: application technique, variations in film thickness, dispersion of the anti-slip texturing additive and the surface variations of the substrate and location to where it will be applied.
To obtain accurate PTV readings that are site specific (if required) it is strongly recommended that a slip assessment pendulum test is undertaken on each specific site after completion of the installation when the resin has fully cured.
Coverage
- A 5kg pack is sufficient to treat 8.3-10.0 m² of surface with the recommended two coat treatment, providing an overall d.f.t. of 400-450 microns
Surface Preparation
Concrete:
- Concrete shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%
- Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes
- Blow holes and defective concrete shall be made good using 201 Epoxy Repair Mortar
- Suitable mechanical treatment such as vacuum grit blasting is the preferred treatment prior to application as this ensures a mechanical ‘key’ for the coating
- A primer coat of 401 WG Epoxy Floor Primer @ 0.2kg/m², is recommended for absorbent concrete surfaces
- Allow to dry for a minimum of 2 hours @ 20°C prior to overcoating
Steel:
- Steel surfaces shall be shot blasted or grit blasted to a nominal Sa 2.5 Swedish standard
- All dust and grease shall be removed prior to coating application
- If a delay is likely to occur between blasting and application, then it is recommended that a coat of 404 Epoxy Metal Primer is applied as holding primer to obviate flash rusting
Note: Substrates with high moisture content or oil contamination can still be coated in most instances by the inclusion of one of our specialist primers. Please see 402 Damp Proof Coating and 403 Oil Tolerant Primer for full details.
Mixing:
- Pour the contents of the curing agent container into the base container and thoroughly mix, preferably by mechanical means until a uniform colour is achieved
Mixing Ratio:
- By Volume = 2.56 Base: 1 Curing Agent
- By Weight = 100 Base: 26.9 Curing Agent
Application
- Apply by brush, roller or airless spray at a nominal rate of 0.25 to 0.3kg/m²
- Can be applied between 5°C - 25°C
- Allow to cure for a minimum of 4 hours @ 20°C prior to light foot traffic access and 10 hours @ 20°C prior to vehicular trafficking
- Should a non-slip finish be required, refer to the ‘Slip Resistance’ heading
Cleaning
- Clean equipment with 109 Tool Cleaner prior to curing of the coating
Curing
- Allow to cure for a minimum of 4 hours @ 20°C prior to light foot traffic access and 10 hours @ 20°C prior to vehicular trafficking
- 7 days cure @ 20°C is recommended prior to exposure to chemicals
Storage & Shelf Life
- Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 25°C
- 304 WG HD Epoxy Floor Coating has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions
Health & Safety
- Avoid contact of the material with skin and eyes
- Wear gloves and goggles
- Wash off splashes immediately with soap and water
- Any eye contamination must be rapidly irrigated with copious amounts of clean water, and immediate medical attention sought
- Please refer to Material Safety Data Sheet for additional information
- 304 WG HD Epoxy Floor Coating shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Rawlins Paints
- For Use By
- Professional Use
- For Use On
- Concrete, Steel
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG, 15KG
- Minimum Applied Thickness
- 400 microns
- Maximum Applied Thickness
- 450 microns
- Mixing Ratio
- By Volume - 2.56 Base: 1 Curing Agent
- Touch Dry (at 20°C)
- 4hrs
- Pot Life (at 20°C)
- 25 Minutes
- Coverage
- 3.2m² per KG
- Coverage
- 0.25-0.30kg/m²/coat
- Max. Application Temperature
- 25°C
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- Touch Dry
- 4 Hours
- UN Number
- UN3082, UN2735
- Resistance to chemicals
- Dilute Acids, Dilute Alkalis, Oil, Petrol, Diesel, Vegetable Oil, Sewage
- Base Type
- Solvent-Free
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Winter Grade
- Product Usage Type
- Topcoat
- Product Category
- Paints
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Cream
- Colour Family
- Lilac
- Colour Family
- Beige
- Colour Family
- Salmon
- Anti-Slip Texture
- Fine Texture
- Categorised As
- Floor Paints > Low Temperature Floor Paints
- Categorised As
- Floor Paints > Low Temperature Anti-Slip Floor Paints
- Seasonal
- Cold Weather
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
304 WG HD Epoxy Floor Coating - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
201 Epoxy Repair Mortar
201 Epoxy Repair Mortar is a high strength, trowel applied, two component epoxy resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces. Pre-packed units – ready to use Fast curing Impact and abrasion resistant Frost resistant and impervious to water Negligible shrinkage Images are for illustrative...
404 Epoxy Metal Primer
2 pack, water-based, epoxy, anti-corrosive primer designed for the protection of steelwork. Non toxic Fast drying - touch dry in 1-2 hours @ 20ºC May be applied to damp or dry surfaces Excellent anti-corrosive properties Compatible with a wide range of top coats Long overcoating window Easily applied Very good adhesion Early water...
502 HD Anti Slip Coating
A 3-pack solvent-free high-build epoxy resin system in 10 colours for application as a heavy duty non-slip floor coating for concrete, metal and wood surfaces requiring high levels of slip resistance. Ideal for use in high traffic areas requiring high slip resistance such floors, stairs, ramps, loading bays Also suitable for chemical plant...
504 Standard Anti Slip Aggregate
504 Standard Anti Slip Aggregate is a specially formulated quartz aggregate to be added to various products in our floor coatings range to provide increased `anti-slip` properties in both dry and wet conditions to improve safety. Produces a rough, non-skid surface Hard wearing and chemical resistant Coloured Quartz Aggregate 0.4-0.8mm...
505 Large Anti-Slip Aggregate
505 Large Anti-Slip Aggregate is a specially formulated quartz aggregate to be added to various high build products in our floor coatings range to provide increased `anti-slip` properties in both dry and wet conditions to improve safety. Produces a rough, non-skid surface Hard wearing and chemical resistant Coloured Quartz Aggregate...
508 Fine Particle Anti-Slip Additive
508 Fine Particle Anti-Slip Additive is a micronized polymer bead ideal for providing a measure of slip resistance when added to coatings and sealers. Available in 3 grades 125 micron 250 micron 500 micron Non-Toxic Controlled particle distribution gives uniform finish Easily incorporated to most coatings and sealers Economical...
401 WG Epoxy Floor Primer
Fast curing, two pack, water dispersible epoxy based primer/sealer/clear coating, especially formulated to meet the technological and ecological requirements of modern building and industrial practice. Designed be used in lower temperatures or when rapid overcoating/access is required. Excellent adhesion to dry or damp surfaces Low odour...
109 Tool Cleaner
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual product More...
402 Damp Proof Coating
2 pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes. Also available in 4,000+ colour options from RAL, BS and NCS Please see 402 Damp Proof Coating - Special Colours...