- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A 3-pack solvent-free high-build epoxy resin system in 4,400+ colours, a heavy duty non-slip floor coating for concrete, metal and wood surfaces requiring high levels of slip resistance.
- Readily available standard colours also available here
- Ideal for use in high traffic areas requiring high slip resistance such floors, stairs, ramps, loading bays
- Also suitable for chemical plant rooms, engineering workshops, automotive and aviation areas, factory units and warehouses
- Excellent for all demarcation and walkways
- This product is for Professional Use Only
- Images are for illustrative purposes only and may differ from the actual product
Ordering References | Weight | Min. Order Quantity |
---|---|---|
RAL Classic and BS4800 Colours | 5m² | 20 |
BS381C, RAL Design, NCS | 5m² | 30 |
Product customisation
Don't forget to save your customization to be able to add to cart502 HD Anti Slip Coating is applied by brush or roller in one thick, durable coat and each composite pack contains sufficient material to provide a slip resistant epoxy coating system to 5 square metres of surface. Solvent and virtually odour free, 502 HD Anti Slip Coating is finished with a hard wearing aluminium oxide anti-slip aggregate and will withstand heavy traffic including fork lift trucks and chemicals.
502 HD Anti Slip Coating is a 3-pack solvent-free high-build epoxy resin system for application as a heavy duty non-slip floor coating for concrete, metal and wood surfaces requiring high levels of slip resistance.
502 HD Anti Slip Coating will provide a heavily textured coloured finish incorporating an anti-slip aggregate which is dispersed within the material upon application.
This product is for Professional Use Only.
Recommended Uses:
- High traffic areas requiring high slip resistance such floors, stairs, ramps, loading bays, etc
- Chemical plant rooms
- Engineering workshops
- Automotive and aviation areas
- Factory units
- Warehouses
- Excellent for all demarcation and walkways
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Limitations
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- Coverage 5m² per pack
- Solvent free and virtually odourless
- Withstands heavy traffic including fork lift trucks
- Three-pack
- For concrete, metal and wood surfaces
- Easy to apply and good colour stability
- Excellent slip resistance
- Hygienic and good chemical resistance
- Tough, long lasting high-build finish
Typical Properties
Technical Data | |
---|---|
502 HD Anti Slip Coating | |
Pot life @ 20°C: | 30 Minutes |
Tack Free Time @20°C: | 3 hours |
Hard Dry Time @ 20°C: | 6 hours |
Full Chemical Resistance @20°C: | 7 days |
Adhesive strength to Concrete: | 3.7MPd (concrete failure) |
Mohs Hardness of Aggregate: | 9 |
Chemical Resistance | |
---|---|
Chemical | Resistance |
Dilute Acids and Alkalis | Excellent |
Oil | Excellent |
Petrol | Excellent |
Diesel | Excellent |
Inorganic Salts | Excellent |
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Coverage
- 5m² per pack
Surface Preparation
Concrete:
- Concrete surfaces shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%
- Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes etc
- Smooth concrete, or concrete with soft laitance, shall be mechanically treated by diamond grinding or grit blasting to provide a clean profiled surface
- Should this not be practicable then acid etching, although less preferable, is also an option
Metal:
- Metal surfaces shall be wire brushed or power disced to remove any rust and loose or flaking material
- Grit blasting is recommended, where practical, for optimum performance
- Coating application should be carried out immediately after preparation
Wood:
- Wood surfaces shall be sanded to a smooth finish, and all previous coating removed
- Do not add the aggregate into the mix
Note: Substrates with high moisture content or oil contamination can still be coated in most instances by the inclusion of one of our specialist primers. Please see 402 Damp Proof Coating and 403 Oil Tolerant Primer for full detail.
Mixing:
- Pre-mix the coloured base component to a uniform consistency then mix the entire contents of the base with the hardener using a slow speed electric mixer for approximately two minutes or until the two components have fully combined
- Pour the contents of the curing agent container into the base container and thoroughly mix, preferably by mechanical means until a uniform consistency is achieved
Note: If a separate mixing bucket is being used then mix thoroughly as above ensuring all contents of the 2 components are removed from the buckets supplied
Mixing Ratio:
- By Volume - 2.56 Base : 1 Curing Agent
- By Weight - 100 Base : 26.9 Curing Agent
Application
- The ambient temperatures of the areas should not be allowed to fall below 10°C throughout the application and the curing period, as this could have an adverse effect on the appearance and colour of the system
- Surface temperature must be above 5°C
- Where possible it is recommended that the application area is heated to a minimum temperature of 15°C ideally to allow the ambient and substrate temperature to stabilise prior to installation
- The mixed unit should be applied immediately by medium pile roller (not foam) or brush with a consistent procedure at an even rate of application to a measured area of no more than 5m² per pack
- Floor areas should be cross-rolled to ensure even application and to minimise roller marks
- Immediately scatter the anti-slip aggregate uniformly onto the wet coat to obtain the desired surface finish (total or light coverage as required)
- Using the same roller that was used to apply the mixed resin and hardener roll over the sprinkled aggregate to bed in and cover the anti-slip aggregate
- It is not normally necessary to re-charge the roller with mixed resin unless very heavy quantities of grit have been applied
- Coverage rates will depend on profile and porosity of the substrate
- 304 HD Epoxy Floor Coating can be installed as a first coat for a smooth finish followed by a top coat of 502 HD Anti Slip Coating for a textured finish
- Or an additional coat of 304 HD Epoxy Floor Coating can be applied (not exceeding 200 microns) over the cured 502 HD Anti Slip Coating system to increase the life expectancy of the system and make the finished surface easier to clean (please note this will most likely reduce the level of slip resistance)
Cleaning
- It is impracticable to clean rollers after use
- Clean equipment with 109 Tool Cleaner prior to curing of the coating
Curing
- Allow to cure for a minimum of 8 hours @ 20°C prior to light foot traffic access
- Curing at lower temperatures will extend this period, whereas curing at higher temperatures will allow faster access
Limitations
- Do not apply to wet or uncured concrete surfaces
- Do not apply at temperatures of 3°C or less
Storage & Shelf Life
- Store in dry conditions at temperatures between 10°C and 25°C
- Do not expose to freezing conditions
- 502 HD Anti Slip Coating has a minimum of 12 months shelf life when stored in original, unopened containers in accordance with manufacturer’s instructions
Health & Safety
- Wear gloves and goggles
- Wash off splashes immediately with soap and water
- Please refer to Material Safety Data Sheet for additional information
- 502 HD Anti Slip Coating shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Water
- For Use On
- Concrete, Wood, Metal
- Application Method
- Brush, Roller
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 5m²
- Mixing Ratio
- 2.56 Base : 1 Curing Agent
- Fully Cured (at 20°C)
- 7 Days
- Pot Life (at 20°C)
- 30 Minutes
- Min. Application Temperature
- 10°C
- Shelf Life (from date of manufacture)
- 12 Months
- Touch Dry
- 3 Hours
- UN Number
- UN3082
- Base Type
- Solvent-Free
- Suitable For Use On
- Stairs
- Suitable For Use On
- Concrete Ramps
- Suitable For Use On
- Metal Floors
- Suitable For Use On
- Timber Floors
- Suitable For Use On
- Wooden Stairs
- Suitable For Use On
- Concrete Stairs
- Suitable For Use On
- Wood Floors
- Suitable For Use On
- Ramps
- Suitable For Use On
- Timber Stairs
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal Stairs
- Suitable For Use On
- Metal
- Suitable For Use On
- Metal Ramps
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Loading Bays
- Suitable For Use On
- Wood
- Suitable For Use On
- Wood Ramps
- Suitable For Use On
- Wooden Floors
- Suitable For Use On
- Wood Stairs
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Wooden Ramps
- Suitable For Use On
- Loading Bays
- Suitable For Use On
- Timber Ramps
- Finish
- Textured Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 3K
- Usages
- Anti-Slip
- Product Usage Type
- Topcoat
- Product Category
- Paints
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Cream
- Colour Family
- Lilac
- Colour Family
- Beige
- Colour Family
- Salmon
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Anti-Slip Texture
- Coarse Texture
- Product Type
- Epoxy
Questions
Question about the product
Stephen Bell on 2022-02-21 12:46:50 | Question:
502HD anti slip coating. Can I paint this over Galvafroid primer on a steel floor |
Answer from Rawlins’ Technical Team:
No, for application to a steel floor the surface preparation will be key to longevity; the steel should ideally be shot blasted to produce a clean profile to optimise adhesion. Reduced levels of preparation may affect the bond strength and therefore the service-life; the use of a suitable primer, such as 404 Epoxy Metal Primer should also be considered on more minimally prepared surfaces. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
502 HD Anti Slip Coating - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
403 Oil Tolerant Primer
Developed for use in applications to oil contaminated floors prior to application of subsequent floor toppings. The product exhibits outstanding adhesion to concrete and other substrates and is particularly suitable where compromised surfaces exist. Solvent free, low odour Excellent adhesion to concrete and steel Surface tolerant...
304 HD Epoxy Floor Coating
We no longer stock this product, but can recommend 304 HB Epoxy Floor Coating as a great alternative. 304 HD Epoxy Floor Coating is a two-pack solvent free high-build epoxy resin system for application as a heavy duty floor coating for concrete, steel and other substrates. Low odour - Very good chemical resistance - High build Excellent...
109 Tool Cleaner
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual product More...
402 Damp Proof Coating
2 pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes. Also available in 4,000+ colour options from RAL, BS and NCS Please see 402 Damp Proof Coating - Special Colours...