- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
704 MMA Flexible Anti-Slip Coating Concrete Grade - Special Colours
2 pack, fast curing flexible coating in 4,400+ matt colours for concrete surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties. Can also be used on correctly prepared steel surfaces. Ideal for parking bays, car parks, balconies, walkways, etc.
- Easily applied, no primer required
- Cures at low temperatures - as low as 0°C*
- Readily available standard colours also available here
- Images are for illustrative purposes only and may differ from the actual product
- This product is for Professional Use Only
*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Ordering References | Weight | Min. Order Quantity |
---|---|---|
RAL Classic and BS4800 Colours | 5KG | 10 |
RAL Classic and BS4800 Colours | 10KG | 5 |
BS381C, RAL Design, NCS | 5KG | 15 |
BS381C, RAL Design, NCS | 10KG | 8 |
Product customisation
Don't forget to save your customization to be able to add to cart704 MMA Flexible Anti Slip Coating Concrete Grade is a two pack, fast curing flexible coating for concrete surfaces. Designed to provide a slip resistant, seamless floor finish with protective and decorative properties.
The flexible coating is enhanced by the incorporation of blended slip resistant aggregates premixed in the resin.
704 MMA Flexible Anti Slip Coating Concrete Grade allows a fast return to service.
This product is for Professional Use Only.
Recommended Uses:
- As a tough, durable, slip resistant coating for concrete substrates
- Can also be used on correctly prepared steel surfaces
- Delineating parking bays, car parks, balconies, walkways, etc
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Coverage
- Surface Preparation
- Application
- Cleaning
- Curing
- Limitations
- Storage & Shelf Life
- Health & Safety
Features & Benefits
- For concrete surfaces
- Provides a seamless floor finish with protective and decorative properties
- Light foot traffic after just 1 hour at 20°C
- Slip resistant
- Can also be used on correctly prepared steel surfaces
- Two-pack
- Tough and abrasion resistant
- Easily applied, no primer required
- Flexible
- Wide range of colours
- Cures at low temperatures - as low as 0°C*
*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Typical Properties
Technical Data | |
---|---|
704 MMA Flexible Anti Slip Coating CG | |
Pot life @ 20°C: | 15 Minutes |
Pot life @ 10°C | 20 minutes |
Tensile strength: | 12MPa |
Elongation at break: | 50% |
Adhesion to concrete: | 3MPa (substrate failure) |
Temp. range during application: | 0°C* to + 40°C |
Temp. range during service: | -30°C to + 60°C |
*Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Chemical Resistance | |
---|---|
Chemical | Resistance |
Dilute Acids and Alkalis | Excellent |
Oil | Excellent |
Petrol | Excellent |
Diesel | Excellent |
Vegetable Oils | Excellent |
Fruit Juices | Excellent |
Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.
Coverage
- A 10kg pack will be sufficient to coat an area of 10m² at a rate of 1kg/m²
Surface Preparation
- Concrete surfaces must be clean, dry and free from contaminants
- New concrete substrates must be allowed to cure for a minimum period of 28 days
- Mechanical preparation by vacuum shot blasting/grit blasting is recommended when the material is being applied to concrete or steel surfaces to provide a mechanical ‘key’
Priming:
- Primer not normally required for concrete
- Porous concrete substrates should be primed with 706 MMA Floor Primer
Notes:
For application to Asphalt/Tarmac surfaces instead see 703 MMA Flexible Anti-Slip Coating.
Damp concrete surfaces can be primed using 709 MMA Damp Proof Primer – refer to product data sheet for full details.
Steel surfaces which cannot be prepared by way of shot/grit blasting may be instead primed using 707 MMA Metal Primer – however this will result in lower performance characteristics - refer to product data sheet for full details.
Mixing:
- 704 MMA Flexible Anti Slip Coating CG is supplied as a two pack material consisting of the base component, and the catalyst component
- Incorporate the catalyst component under mechanical stirring and mix for 1-2 minutes
Mixing Ratio:
- (% Catalyst by Weight) = 2
Application
- Apply 704 MMA Flexible Anti Slip Coating CG using short nap perlon, smooth lambswool rollers or squeegee at a nominal rate of 1-2kg/m²
- On porous or open surfaces a second coat may be required
Cleaning
- Clean equipment with 109 Tool Cleaner immediately after use
Curing
- Light Foot Traffic: 1 hour @ 20°C
- Vehicular Traffic: 2 Hours @ 20°C
- Full chemical resistance: 24 hours @ 20°C
Limitations
- Do not apply directly to damp substrates
704 MMA Flexible Anti Slip Coating CG will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered.
Storage & Shelf Life
- Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
- Adequate ventilation of the storage area should be provided
- Keep container tightly closed when not in use
- 704 MMA Flexible Anti Slip Coating CG has a minimum shelf life of six months when stored in original, unopened containers in accordance with manufacturer’s instructions
Health & Safety
704 MMA Flexible Anti Slip Coating CG is flammable during application, so adequate safety precautions should be observed.
- Avoid contact of the material with skin and eyes
- Wear gloves and goggles
- Wash off splashes immediately with soap and water
- Any eye contamination must be rapidly irrigated with copious amounts of clean water, and immediate medical attention sought
- Please refer to Material Safety Data Sheet for additional information
- 704 MMA Flexible Anti Slip Coating CG shall be applied strictly in accordance with the manufacturer’s instructions
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Data sheet
- Manufacturer
- Rawlins Paints
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete, Steel
- Application Method
- Roller, Squeegee
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 10KG
- Key Features
- Fast Curing
- Touch Dry (at 20°C)
- 1 Hour
- Fully Cured (at 20°C)
- 24 Hours
- Pot Life (at 20°C)
- 15 Minutes
- Coverage
- 1m² per KG
- Recommended Thinner/Cleaner
- 109 Tool Cleaner
- Tensile Strength
- 12MPa
- Max. Application Temperature
- 40°C
- Min. Application Temperature
- 0°C
- Shelf Life (from date of manufacture)
- 6 months
- UN Number (Activator)
- UN3106
- UN Number (Base)
- UN1866
- Elongation at break
- 50%
- Pot Life (at 10°C)
- 20 minutes
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Suitable For Use On
- Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Balconies
- Suitable For Use On
- Walkways
- Suitable For Use On
- Steel Floors
- Suitable For Use On
- Parking Bays
- Suitable For Use On
- Concrete Walkways
- Suitable For Use On
- Car Parks
- Finish
- Matt
- Application Method
- Roller
- Application Method
- Squeegee
- Components
- 2K
- Usages
- Anti-Slip
- Product Usage Type
- Topcoat
- Product Category
- Paints
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Dark
- Colour Family
- Cream
- Colour Family
- Stone
- Colour Family
- Lilac
- Colour Family
- Beige
- Colour Family
- Salmon
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Categorised As
- Floor Paints > Low Temperature Anti-Slip Floor Paints
- Seasonal
- Cold Weather
- Product Type
- MMA
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
704 MMA Flexible Anti-Slip Coating Concrete Grade - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
703 MMA Flexible Anti-Slip Coating
2 pack, fast curing flexible coating in 10 colours usually for tarmac and asphalt surfaces. Provides a slip resistant, seamless floor finish with protective and decorative properties. Can also be used on correctly prepared concrete and steel surfaces. Ideal for delineating parking bays, car parks, balconies, etc. Rapid curing - light foot...
706 MMA Floor Primer
A rapid curing, general purpose primer enabling fast overcoating. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds. Ideal for use as a rapid curing primer for concrete, steel, masonry,...
707 MMA Metal Primer
A rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C* Very good corrosion resistance Excellent adhesion Impervious to water Pre-packed units ready for use...
709 MMA Damp Proof Primer
Developed as a primer for damp concrete, being used prior to any of our MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C*. Very good chemical resistance. Excellent adhesion to damp concrete. Impervious to water. Pre-packed units ready for use. Easily applied. Can be overcoated...