- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
3 pack methacrylate resin system in 4,400+ colours for use as a slip resistant membrane for vehicular traffic on car park decks, walkways, and areas subjected to heavy fork-lift traffic, and as a skid resistant finish on ramps, heavily trafficked turning areas, ships decks, landing piers, etc.
- Ultra-fast curing - low temperature cure, down to -30°C
- Resistant to oil, petrol, diesel and many industrial chemicals
- Readily-available standard colours also available here
- Images are for illustrative purposes only and may differ from the actual product
- This product is for Professional Use Only
Ordering References | Weight | Min. Order Quantity |
---|---|---|
RAL Classic and BS4800 Colours | 20KG | 3 |
BS381C, RAL Design, NCS | 20KG | 4 |
Product customisation
Don't forget to save your customization to be able to add to cart713 MMA Deck Coat is a three pack Methacrylate resin system, modified to impart toughness, resilience and waterproofing properties to the cured membrane. The abrasion and impact resistance, together with the low temperature flexibility and excellent adhesion to concrete and steel make 713 MMA Deck Coat an ideal material for uses as a membrane subjected to vehicular traffic.
Fast curing, slip-resistant membrane with excellent adhesion to concrete and steel.
Typical uses include as a slip resistant membrane for car park decks, walkways, and areas subjected to heavy fork-lift traffic, and as a skid resistant finish on ramps, heavily trafficked turning areas, ships decks, landing piers, etc.
This product is for Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Surface Preparation
- Priming
- Mixing
- Application
- Sealing
- Equipment Cleaning
- Curing
- Storage and Shelf Life
- Coverage
- Limitations
Features & Benefits
- Ultra-fast curing characteristics
- Tough, resilient, and highly durable
- Resistant to oil, petrol, diesel and many industrial chemicals
- Flexible and abrasion resistant
- 4000+ colour options from RAL, BS and NCS allow easy differentiation of specific areas e.g. walkways and parking bays in different colours
- Low temperature cure, down to -30°C
- * Refer to our Technical Department for advice on 0113 2455450 (option 2) or send a message to [email protected]
- Suitable for indoor and outdoor surfaces
- Excellent adhesion to concrete and steel
- 20kg pack is sufficient to cover an area of 2.8m² at a thickness of 4mm.
Typical Properties
Typical Properties | |||
---|---|---|---|
Pot life @ 20°C: | 25 Minutes | ||
Thickness: | Minimum 3mm, maximum 8mm | ||
Tensile strength: | 6MPa @ 20°C | ||
Elongation at break: | 180% @ 20°C | ||
Temperature range during application: | -30°C* to + 40°C | ||
Temperature range during service: | -40°C to + 60°C | ||
Chemical resistance: | Excellent resistance to dilute acids and alkalis, oil, petrol, diesel, vegetable oils, and fruit juices |
* Refer to our Technical Department for advice on 0113 2455450 (option 2) or send a message to [email protected]
Surface Preparation
Concrete surfaces shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%. Ensure that the concrete is clean and free from dust, laitance, grease, oil, curing compound, and existing paint finishes, etc.
Blow holes and defective concrete shall be made good using a proprietary repair compound e.g. 710 MMA Repair Mortar. Suitable mechanical treatment, such as vacuum grit blasting, is the preferred treatment prior to application as this ensures a mechanical ‘key’ which will optimise adhesion.
Steel surfaces shall be shot blasted or grit blasted to a nominal Sa 2.5 Swedish Standard and to provide a medium blast profile.
All dust shall be removed prior to coating application. A coat of 707 MMA Metal Primer shall be applied as soon as practicable after blasting, in order to obviate the possible occurrence of ‘flash rusting’.
Priming
Concrete surfaces shall be primed with a coat of 706 MMA Floor Primer, applied by brush, or roller, at a nominal rate of 0.3kg/m². Long nap lambswool rollers are recommended for primer application. Allow primer to cure for a minimum of 40 minutes.
Steel surfaces shall be primed with 707 MMA Metal Primer.
Mixing
713 MMA Deck Coat is supplied as a three-pack material consisting of the BASE component, the CATALYST component and the FILLER component.
Add the CATALYST component to the BASE component and mix thoroughly, preferably by mechanical means for a minimum of 2 minutes.
Pour the contents into a mixing vessel and add the FILLER component whilst stirring. A low speed drill with paddle attachment may be used or else a forced action mixer e.g. Creteangle type.
Application
Pour the mixed material onto the prepared and pre-primed surface and apply by serrated trowel to the desired thickness. De-aerate the material by spike rollering.
Within 5 minutes, broadcast the appropriate aggregate at a nominal rate of 6kg – 15kg/m². When cured, sweep off excess aggregate.
Sealing
The application of a clear sealer coat is recommended to reduce tendency towards staining and dirt pick up, and thereby ensure optimum ease of cleaning where required.
Apply a roller coat of 705 MMA Clear Seal Coat F or 701 MMA Floor Coating at a nominal rate of 0.3 – 0.5kg/m² and allow to cure for a minimum of 2 hours prior to putting back into service.
A second coat maybe necessary where large aggregate has been used as scatter.
Equipment Cleaning
Clean equipment with 109 Tool Cleaner immediately after use.
Curing
- Light Foot Traffic: 1 hour @ 20°C
- Full Chemical Resistance: 24 Hours @ 20°C
Storage and Shelf Life
- Store in dry conditions, out of direct sunlight, at temperatures between 10°C and 20°C
- Adequate ventilation of the storage area should be provided
- Keep container tightly closed when not in use
- 713 MMA Deck Coat has a minimum shelf life of 6 months when stored in original, unopened containers in accordance with manufacturer’s instructions
Coverage
A 20kg pack is sufficient to cover an area of 2.8m² at a thickness of 4mm.
Limitations
- Do not apply to wet, uncured or unprimed concrete surfaces
- 713 MMA Deck Coat will taint food during application, so that all foodstuffs in the immediate vicinity must be removed or properly covered
Data sheet
- Manufacturer
- Rawlins Paints
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Concrete, Steel
- Application Method
- Serrated trowel
- Colour
- Fully Tintable
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 20KG
- Minimum Applied Thickness
- 3mm
- Maximum Applied Thickness
- 8mm
- Pot Life (at 20°C)
- 25 Minutes
- Coverage
- Per 20KG Pack: 2.8m² at a thickness of 4mm.
- Tensile Strength
- 6MPa @ 20°C
- Max. Application Temperature
- 40°C
- Min. Application Temperature
- -30°C
- Shelf Life (from date of manufacture)
- 6 months when stored in original, unopened containers in accordance with manufacturer’s instructions
- UN Number (Activator)
- UN3106
- UN Number (Base)
- UN1866
- Elongation at break
- 180% @ 20°C
- Base Type
- Solvent-Based
- Base Type
- MMA
- Suitable For Use On
- Concrete Walkways
- Suitable For Use On
- Demarcation
- Suitable For Use On
- Car Park Decks
- Suitable For Use On
- Forklift-Trafficked Floors
- Suitable For Use On
- Steel Ramps
- Suitable For Use On
- Concrete
- Suitable For Use On
- Turning Areas
- Suitable For Use On
- Steel
- Suitable For Use On
- Ships Decks
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Landing Piers
- Suitable For Use On
- Concrete Ramps
- Suitable For Use On
- Walkways
- Suitable For Use On
- Steel Floors
- Suitable For Use On
- Steel Decks
- Suitable For Use On
- Ramps
- Suitable For Use On
- Decks
- Suitable For Use On
- Parking Bays
- Suitable For Use On
- Boat Decks
- Suitable For Use On
- Concrete Decks
- Finish
- Matt
- Application Method
- Trowel
- Components
- 3K
- Product Usage Type
- Topcoat
- Product Category
- Paints
- Colour Family
- Grey
- Colour Family
- Salmon
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Dark
- Colour Family
- Cream
- Colour Family
- Stone
- Colour Family
- Beige
- Colour Family
- Lilac
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
713 MMA Deckcoat - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
701 MMA Floor Coating
2 pack, fast curing coating in 10 colours designed to provide a dust-free, seamless floor finish with protective and decorative properties on concrete and steel surfaces. The inherent slip resistance of the coating may be enhanced by the incorporation of 504 Standard Anti Slip Aggregate. Also available in 4,000+ colour options from RAL, BS...
706 MMA Floor Primer
A rapid curing, general purpose primer enabling fast overcoating. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds. Ideal for use as a rapid curing primer for concrete, steel, masonry,...
707 MMA Metal Primer
A rapid curing three-pack primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles to be used prior to any of the MMA range of coatings, mortars, and screeds. Rapid cure, even at low temperatures - from as low as -30°C* Very good corrosion resistance Excellent adhesion Impervious to water Pre-packed units ready for use...
710 MMA Repair Mortar
710 MMA Repair Mortar is a fast curing, high strength, trowel applied, three component methacrylate resin mortar, designed for rapid and permanent repairs to concrete and masonry surfaces. Resilient Very good chemical resistance Excellent adhesion Fast curing, even at low temperatures (down to -10°C*) Impact and abrasion resistant...
109 Tool Cleaner
109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual product More...