- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A two component, high solids, flexible, light to medium-duty trafficable, colour stable and flame retardant polyurethane coating.
- Part of - and fire rated to - BS476-3:EXT.F.AA when used in conjunction with:
- Fosroc Nitoproof 800 roof/balcony waterproofing system
- Fosroc Polyurea WPE waterproofing system
- LEED SS10 v4.1 pass
Please Note: This product is subject to a lead time of 14-21 Working Days
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Quick Links - Click To Jump To Section:
Features & Benefits
- Roller applied
- Environment friendly
- Seamless and monolithic, including field joints
- Significantly enhances the durability of reinforced concrete when used in conjunction with either Nitoproof 800 or Fosroc Polyurea WPE
- Strong adhesive bond
- Long open time for use with Fosroc Polyurea - can be applied up to 48 hours after polyurea application *
- * for applications >48 hours after polyurea application, reactivation is required – see Fosroc Polyurea Method Statement
- Resistant to spillage of various chemicals including:
- Motor oil
- Kerosene
- Diesel
- Petrol
Application Instructions
- Pour and drain the full contents of the hardener container into the resin container and mix thoroughly with a slow speed electric stirrer fitted with an appropriate paddle, for a minimum of 3 minutes until homogeneous. DO NOT dilute the product under any circumstances
- Spread and apply at the required coverage rate (see Coverage) using a roller to achieve a uniform finish. A broadcast of dried sand may be used to provide anti-slip feature (coloured sand may be used for aesthetic effect)
- Allow to dry, walkable after approximately 12 hours at 20℃
Recoating
For recoating applications, if the existing coating has been allowed to dry >48 hours, then a surface reactivation should be carried out using a Fosroc Nitoprime 150 wipe, and allowed to dry before applying the recoating, approximately 30 minutes at 20℃. Refer to our technical team for advice on 0113 2455450 (option 2) or send a message to [email protected].
Limitations
- Do not proceed with application if atmospheric relative humidity is >90% or if the surface temperature is <3ºC above the dew point
- Application should not commence when the substrate temperature or the ambient temperature is, or is anticipated to be, <+5ºC during the application or within the tack-free period
- For work in exposed areas, do not proceed with application if precipitation is imminent. Keep applied areas protected from precipitation within the tack-free period
- The manufacture of Fosroc Nitoproof UVR Topcoat is a batch process and despite close manufacturing tolerances, colour variation may occur between batches. Fosroc recommends using Nitoproof UVR Topcoat from a single batch as the final finish in one area section
- As with all exterior coatings, some fading of colour can be expected over time, depending on UV levels and temperature
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete
- Application Method
- Squeegee
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG, 10KG
- Dry to Recoat (at 20°C)
- 8 - 48 hours
- Pot Life (at 20°C)
- 20 minutes
- Coverage
- On Fosroc Nitoproof 800: 22 m2 per 10 kg pack for 0.3 mm film
On Fosroc Polyurea WPE: 32 m2 per 10 kg pack for 0.2 mm film - Min. Application Temperature
- 5ºC
- Shelf Life (from date of manufacture)
- 12 months
- Elongation at break
- 50%
- Drying time
- Trafficable, 20ºC :
Light Duty Traffic 12 hours
Service Traffic 2 - 3 days - Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Roofs
- Suitable For Use On
- Balconies
- Application Method
- Squeegee
- Application Method
- Roller
- Manufacturer
- Fosroc
- Usages
- Above Ground Waterproofing
- Product Usage Type
- Topcoat
- Product Range
- Nitoproof
- Colour Family
- Beige
- Colour Family
- Green
- Colour Family
- Yellow
- Colour Family
- Grey
- Colour Family
- Blue
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Nitoproof UVR Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Fosroc Nitoproof 800 Membrane
Fosroc Nitoproof 800 Membrane is part of the Fosroc Nitoproof 800 system, a flexible, seamless, liquid applied waterproofing system for concrete structures. Two component, trowel applied membrane for new and existing structures Certified to CEN/TS 14416 – Determination of resistance to root penetration Professional use only - from the...
Fosroc Nitoprime UR FS
Fosroc Nitoprime UR FS is a two component primer for use on concrete as part of the Nitoproof 800 system. Particularly suitable for priming concrete elements such as balconies, walkways, flat roofs; covered / buried concrete decks including podium decks and green roofs; reservoir up stands and wind turbine plinth bases. More Information...
Fosroc Nitoprime 150
Fosroc Nitoprime 150 is a single component solvent based surface treatment primarily used for the re-activation of cured polyurea and polyurethane based coatings where the over-coating window has been exceeded. Ideal for use with Fosroc Nitoproof 800 / Nitoproof UVR Topcoat and Fosroc Polyurea Ensures the required intercoat adhesion is...