Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application Instructions
• Limitations

Features & Benefits

• Roller applied
• Environment friendly
• Seamless and monolithic, including field joints
• Significantly enhances the durability of reinforced concrete when used in conjunction with either Nitoproof 800 or Fosroc Polyurea WPE
• Strong adhesive bond
• Long open time for use with Fosroc Polyurea - can be applied up to 48 hours after polyurea application *
• * for applications >48 hours after polyurea application, reactivation is required – see Fosroc Polyurea Method Statement
• Resistant to spillage of various chemicals including:
• Motor oil
• Kerosene
• Diesel
• Petrol

Application Instructions

• Pour and drain the full contents of the hardener container into the resin container and mix thoroughly with a slow speed electric stirrer fitted with an appropriate paddle, for a minimum of 3 minutes until homogeneous. DO NOT dilute the product under any circumstances
• Spread and apply at the required coverage rate (see Coverage) using a roller to achieve a uniform finish. A broadcast of dried sand may be used to provide anti-slip feature (coloured sand may be used for aesthetic effect)
• Allow to dry, walkable after approximately 12 hours at 20℃

Recoating

For recoating applications, if the existing coating has been allowed to dry >48 hours, then a surface reactivation should be carried out using a Fosroc Nitoprime 150 wipe, and allowed to dry before applying the recoating, approximately 30 minutes at 20℃. Refer to our technical team for advice on 0113 2455450 (option 2) or send a message to [email protected].

Limitations

• Do not proceed with application if atmospheric relative humidity is >90% or if the surface temperature is <3ºC above the dew point
• Application should not commence when the substrate temperature or the ambient temperature is, or is anticipated to be, <+5ºC during the application or within the tack-free period
• For work in exposed areas, do not proceed with application if precipitation is imminent. Keep applied areas protected from precipitation within the tack-free period
• The manufacture of Fosroc Nitoproof UVR Topcoat is a batch process and despite close manufacturing tolerances, colour variation may occur between batches. Fosroc recommends using Nitoproof UVR Topcoat from a single batch as the final finish in one area section
• As with all exterior coatings, some fading of colour can be expected over time, depending on UV levels and temperature

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.