- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
High performance polyester fabric with high strength and good stretch characteristics - used as part of the Nitodek FS system a hybrid fast curing trafficable waterproofing system that combines MMA Technology with polyurethanes to produce a slip resistant solution that is both hard wearing and flexible suitable for balconies, car park decks, ramps and turning circles.
Bespoke systems can be produced from the suite of system products to suit specific situations and performance requirements. Nitodek FS Fleece is used for reinforcement usually with Nitodek FS Membrane.
- Easy to apply
- Good crack bridging properties
Please Note: This product is subject to a lead time of 14-21 Working Days
Supplied in rolls:
- 0.2m x 100m roll - 2.4kg
- 0.5m x 100m roll - 6kg
- 1.0m x 100m roll - 12kg
Allow for a minimum 5cm overlap with adjacent rolls when estimating.
Application
Surface preparation and primer application is as outlined in the Nitodek FS Primer data sheet. Allow the primer to fully cure. Apply the first coat of Nitodek FS Membrane using a roller or similar.
While the first coat of membrane is still wet, lay the fleece immediately into the wet resin, overlapping the fleece edges by 5cm minimum; ensure the fleece is fully saturated.
To avoid delamination, bubbles or curing problems in the Nitodek FS system, it is very important that the fabric is used in a wet-on-wet application. The aim is to ensure that the fabric is fully saturated with the surrounding resin material. This can be best achieved by using approximately 1.2 to 1.5kg/m2 of the second coat of resin membrane. The resin is placed evenly onto the fleece surface with a roller - at least 5cm wider than the fleece width.
Apply the second coat of membrane, while the first coat is still wet, to fully encapsulate the fleece, but avoiding air pockets; allow the second coat of membrane to harden (approximately 45 minutes at 20°C).
After fully curing (1-2 hours) continue with the system application as outlined in the Nitodek FS Method Statement.
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Floors
- Pack Size
- 0.2mx100m roll 2.4kg
0.5mx100m roll 6kg
1.0mx100m roll 12kg - Suitable For Use On
- Car Parks
- Suitable For Use On
- Car Park Decks
- Suitable For Use On
- Turning Circles
- Suitable For Use On
- Concrete
- Suitable For Use On
- Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Balconies
- Suitable For Use On
- Concrete Ramps
- Suitable For Use On
- Ramps
- Manufacturer
- Fosroc
- Components
- 1K
- Product Usage Type
- Reinforcement
- Product Range
- Nitodek
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Nitodek FS Fleece is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT