- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Transparent, solvent-free, 2-component methacrylic resin that cures rapidly, even at low temperatures, on steel and new and existing concrete surfaces.
- Part of the Nitodek FS system
- Fast setting allows for quick over-coating
- Easy to apply
- Suitable for priming vertical and absorbent substrates
- Seamless
- Solvent free
- Price on application - enquire with our team on 0113 2455450 or send a message to [email protected]
The quantity of hardener to be added to Nitodek FS Primer Resin must be adjusted dependent on the temperature of the substrate. For the exact quantities, please refer to the table “Nitodek FS Hardener dosages” in the data sheet.
Do not under-dose the hardener powder, as this will lead to curing problems. Do not overdose the hardener powder, as this can also lead to serious curing problems.
Observe the recommended mixing quantites to avoid flash setting of the material in the pot before it can be fully applied. This also ensures good penetration of the primer into the substrate. The mixed material must be applied as soon as the hardener powder has been properly dispersed into the resin component.
Nitodek FS Primer must be applied evenly without leaving puddles by means of a squeegee, paint roller or brush. If rubber blades are used, the surface must always be rolled with a paint roller afterwards. Matt and heavily absorbent patchesmust be re-primed wet-into-wet before hardening until the pores are closed up. Resin consumption is about 0.4 kg/m2. Nitodek FS Primer must be allowed to properly cure before over-coating.
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Floors
- Pack Size
- 25KG
- UN Number
- UN1866
- Base Type
- Solvent-Free
- Suitable For Use On
- Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Steel Floors
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Squeegee
- Manufacturer
- Fosroc
- Components
- 2K
- Product Usage Type
- Primer
- Product Range
- Nitodek
- Colour Family
- Clear
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Nitodek FS Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT