- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Roller applied, three-part polyurethane coating which cures to a matt surface with a mottled finish.
- Resistant to a wide range of commonly used chemicals in the food, dairy and pharmaceutical industries such as concentrated citric acid (fruits), spirit vinegar (50% acetic acid), lactic acid (food & dairy products) and common alcohols (methanol & ethanol). Also resistant to a wide range of inorganic acids, fuels, hydraulic oils, mineral oils and solvents
- Designed as a sealer for Fosroc Nitoflor Coving U mortar, where maximum chemical resistance is required
Description
Quick Links - Click To Jump To Section:
Features & Benefits
- Ease of application
- Easy to clean
- Excellent chemical resistance
- Resistant to a wide range of commonly used chemicals in the food, dairy and pharmaceutical industries such as concentrated citric acid (fruits), spirit vinegar (50% acetic acid), lactic acid (food & dairy products) and common alcohols (methanol & ethanol)
- Also resistant to a wide range of inorganic acids, fuels, hydraulic oils, mineral oils and solvents
- Designed as a sealer for Fosroc Nitoflor Coving U mortar
Application Notes
- Thoroughly drain the contents of the hardener component into the coloured base component and mix for a minimum of 1 minute or until a homogeneous mix is obtained
- Add the full contents of the aggregate bag slowly and mix for a further 1-2 minutes until a lump free consistency is obtained
- Apply using a medium nap roller directly from a paint tray or scuttle
- Push the coating well into the surface, make sure it is fully wetted out then pull back to a tight coat with the roller
- Inconsistent application thickness will result in an uneven finish and appearance. It is always preferable to apply two thin coats rather than one heavy coat
- Coverage rate 15m2 per 3 kg pack per coat (DFT per coat ~140 microns)
- Regular cleaning is essential to enhance and maintain the life expectancy, slip resistance and appearance of the floor. Cured product can be easily cleaned using industry standard cleaning chemicals and techniques
Limitations
- Do not proceed with application if atmospheric relative humidity is, or is anticipated to be, >90% or if the surface temperature is <3ºC above the dew point. Application should not commence when the substrate temperature or the ambient temperature is, or is anticipated to be, <5ºC during the application or within the tack-free period
- The manufacture of Fosroc Nitoflor HB300 U is a batch process and despite close manufacturing tolerances, colour variation may occur between batches. Using Nitoflor HB300 U from a single batch as the final finish in one area section is recommended
- Product is not colour fast and may yellow over time. The rate of change will depend on UV light and heat levels and cannot be predicted. This will be more pronounced with lighter colours and blue shades and does not compromise the product’s performance or chemical resistance characteristics
Product Details
8329-919294
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete Floors
- Application Method
- Roller
- Sheen
- Textured Matt
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 3KG
- Dry to Recoat (at 20°C)
- 16 - 48 hours
- Fully Cured (at 20°C)
- 7 days
- Pot Life (at 20°C)
- 15 minutes
- Coverage
- 15m2 per 3 kg pack per coat
- Shelf Life (from date of manufacture)
- 12 months (6 months for the aggregate component)
- Recommended Dry Film Thickness
- 140 microns
- Dry for Light Traffic (at 20°C)
- 24 hours
- Flammability
- Non-Flammable
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Suitable For Use On
- Concrete Floors
- Finish
- Textured Matt
- Application Method
- Roller
- Manufacturer
- Fosroc
- Components
- 3K
- Product Usage Type
- Topcoat
- Product Range
- Nitoflor
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Yellow
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Nitoflor HB300 U is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like