- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Fosroc Nitodek UV-LM is a flexible, UV resistant linemarker for demarcation of car parking decks.
- Skid resistant when used over an aggregated system
- Suitable for application onto Fosroc Nitodek systems
Price on application - enquire with our team on 0113 2455450 or send a message to [email protected]
Description
Quick Links - Click To Jump To Section:
Features & Benefits
- Seamless
- Easy to clean and maintain
- Chemical resistant – good resistance to a wide range of chemicals
- Durable - good abrasion and wear resistance
- Skid resistant (when used over an aggregated system)
Application Notes
- Suitable for application onto Fosroc Nitodek systems
- Application temperature range is 5 - 40ºC. Materials must be stored at 15 - 25ºC for a minimum of 48 hours immediately prior to use
- Pour and drain the full contents of the hardener container into the base container and mix thoroughly with a slow speed electric stirrer, for a minimum of 3 minutes until homogeneous
- Apply to the surface at the required coverage rate using a short nap roller leaving a uniform finish
- Allow to cure for 16 hours at 20ºC
- Coverage: 10m2 per 5 kg pack @ 0.3mm WFT
- Tools and equipment can be cleaned immediately after use with Fosroc Solvent 102. Hardened material must be removed mechanically
- The service life of a car park deck can be considerably extended by good housekeeping. Cleaning may be carried out by use of a rotary scrubbing machine with a water miscible cleaning agent at temperatures of up to 50ºC
Limitations
- Do not use on floors where rising dampness or a potential osmosis problem may exist
- Do not proceed with application if atmospheric relative humidity is >90% or if the surface temperature is <3ºC above the dew point
- Application should not commence when the substrate temperature or the ambient temperature is, or is anticipated to be, <5ºC during the application or within the tack-free period
- For work in exposed areas, do not proceed with application if precipitation is imminent. Keep applied areas protected from precipitation within the tack-free period
- The design strength of concrete surfaces must be a minimum of 25MPa compressive strength at 28 days
- The manufacture of Fosroc Nitodek UV-LM is a batch process and despite close manufacturing tolerances, colour variation may occur between batches. Fosroc recommends using Nitodek UV-LM from a single batch as the final finish in one area section
Product Details
8336-919347
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete Floors
- Application Method
- Roller
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG
- Pot Life (at 20°C)
- 15 - 20 minutes
- Coverage
- 10m2 per 5 kg pack
- Max. Application Temperature
- 40ºC
- Min. Application Temperature
- 5ºC
- Shelf Life (from date of manufacture)
- 12 months
- Recommended Wet Film Thickness
- 0.3mm
- Dry for Light Traffic (at 20°C)
- 16 hours
- Dry for Full Traffic (at 20°C)
- 4 - 5 days
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Concrete Floors
- Application Method
- Roller
- Manufacturer
- Fosroc
- Components
- 2K
- Product Usage Type
- Line Marking
- Product Range
- Nitodek
- Colour Family
- White
- Colour Family
- Yellow
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Nitodek UV-LM is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like