As a labour saving, easy to install fire resistant insulation product, the Rockwool Fire Barrier systems offer essential prevention against fire and smoke in hidden spaces. As part of the comprehensive Rockwool Firepro range of products, the Rockwool Fire Barrier systems feature a patented 'Quick Fit' support system, which offers a quick, cost effective solution for fire resistant periods of up to 60 minutes.

The ease of installation significantly reduces the risk of error, whilst extended drops can be catered for as the system has been tested to perform in void heights of up to 10.5 metres. 

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application Notes

Features & Benefits

• For use with Rockwool Fire Barrier System
• Patented ‘quick-fit’ system for up to 1 hour fire resistance
• Suitable for void heights up to 10.5 meters
• Can be fixed to concrete decks, timber and steel meaning that the cost of installation is reduced, and the speed of installation is increased

Uses

• Pitched roof voids
• Head of wall
• Concealed ceiling spaces
• Multiple substrates
• Fire protection of structural steelwork

Application Notes

• Please refer to the Product Data Sheet for the relevant base product/system for detailed application instructions
• The unique, patented Rockwool Support Angle and Clamping Plate is used to fasten two 50mm Fire Barrier curtains with one support angle without the need for a cavity
• The Support Angle has tongues that are pushed out from opposite sides at 300mm max. centres
• The Fire Barriers are then impaled on the tongues on both sides and clamped using the Clamping Plates
• The tongues are finally bent over the Clamping Plates, completing the system
• The system uses 50mm Fire Barrier in a double layer with joints staggered (please note; wire reinforced sides should be placed outwards)
• When a 1 hour Fire Barrier is supported on structural timber (for example a trussed rafter), and the thickness of timber is 35-49mm, one layer of 60mm Fire Barrier must be placed on each side of the timber. Where timber thickness is 50mm or greater, 2 layers of 50mm Fire Barrier are sufficient

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.