- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Pick from 290+ greys, with 12 trending shades of grey including Anthracite Grey in Zinsser's ultimate all surface paint with up to 15 years performance on uPVC, doors and windows, composite surfaces, exterior woodwork, masonry, cladding, Plastisol, steel, and more. Simply click 'Choose a colour' to see these shades.
- Also available in 4,100+ RAL, NCS and BS colours
- The ultimate performance all surface paint
- Mould and weather resistant - Recoatable in just 3 hours - 15 year lifetime
- It is recommended to use Zinsser Allcoat Exterior Water Based unless application conditions (i.e. winter months) do not allow for water based paint to be used externally
- This product is not suitable for application on floors
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Product Details
2081-896995
Data sheet
- Manufacturer
- Zinsser
- For Use By
- Consumer Use
- For Use On
- Brick
Masonry
Doors
Metal
Windows
Weathered Bitumen
Garage Doors
Stucco
uPVC
Stone
Timber
Wood
Trim Skirting
Cladding
Front Doors
Concrete - Application Method
- Brush
Roller
Spray - Single, Two or Three Pack
- Single
- Pack Size
- 1L
2.5L
5L - Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 1 Hour
- Dry to Recoat (at 20°C)
- 3 Hours
- Coverage
- 10m² per litre
- Solids by Volume
- 50%
- UN Number
- UN1263
- Hard Dry
- 16 hours at 20℃
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Trim Skirting
- Suitable For Use On
- Windows
- Suitable For Use On
- Front Doors
- Suitable For Use On
- Garage Doors
- Suitable For Use On
- UPVC
- Suitable For Use On
- Masonry
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Cladding
- Suitable For Use On
- Weathered Bitumen
- Suitable For Use On
- Concrete
- Suitable For Use On
- Stucco
- Suitable For Use On
- Brick
- Suitable For Use On
- Stone
- Suitable For Use On
- Doors
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Zinsser
- Usages
- High Weather Resistance
- Fastest Delivery
- Next Working Day
- Colour Family
- Anthracite Grey
- Colour Family
- Grey
- Colour Family
- Black
- Colour Family
- White
Questions
Question about the product
Middleton Village Hall
on
2023-08-19 13:17:09
| Question:
Hi, Is your paint suitable to paint a steel roof? |
Answer from Rawlins’ Technical Team:
This product isn't suitable for use on any type of roof, as there is insufficient water run-off, meaning the paint could be in prolonged contact with water or immersed in water. This would likely cause the paint to fail much quicker as a result. If you can provide more information in relation to your project to [email protected], we will do our best to help. | |
|
Linden
on
2022-09-20 20:55:22
| Question:
Can you use this paint for composite front doors? |
Answer from Rawlins’ Technical Team:
Yes, assuming the composite doors are clean, dry, sound and prepared as detailed in the technical data sheet this can be used. 2 coats should be applied and 3 to any areas subject to pooling water. | |
|
Benchmark construction
on
2022-05-07 13:22:52
| Question:
Hi can you please let me know what is the best way to apply the coating to windows and doors for the best result . Regards Ronnie sigerson |
Answer from Rawlins’ Technical Team:
This product can be applied by brush or roller application. Assuming these are UPVC no primer will be required, but they must be clean ,dry, sound and prepared as detailed in the technical data sheet. | |
|
Steve
on
2022-04-07 14:24:40
| Question:
I'm replacing wooden casement windows which are stained brown with uPVC flush windows in Agate Grey. Wooden conservatory will remain and this is also painted with Sadolin brown stain. The guttering and down pipes are brown plastic. Can I paint conservatory and guttering with exterior satin finish Agate Grey and what preparation would you recommend for each? |
Answer from Rawlins’ Technical Team:
Yes assuming the guttering and down pipes are upvc, clean, dry, sound and prepared as detailed in the technical data sheet Zinsser AllCoat Exterior Satin (Solvent Based) could be used for this application. If they are not upvc we would recommend priming first with Zinsser Bulls Eye 1-2-3 and checking for compatibility and adhesion prior to full application. Regarding the stained timber areas we would recommend these are clean, dry, sound, sanded and prepared as detailed in the technical data sheet then primed with Zinsser Cover Stain prior to application of Zinsser AllCoat Exterior Satin (Solvent Based). If temperatures are over 10°C we would recommend using Zinsser AllCoat Exterior Satin (Water Based). | |
|
Edwina
on
2022-04-01 08:30:23
| Question:
Hi Just wondering if Zinsser Allcoat Exterior Satin (solvent based) is suitable for painting a garden shed. Many thanks |
Answer from Rawlins’ Technical Team:
Yes this product is suitable for application to a timber shed, assuming it is clean, dry, sound and prepared as detailed in the technical data sheet. Any bare timber areas must be primed first with Zinsser Cover Stain. | |
|
Peter Harriman
on
2022-03-08 20:17:27
| Question:
I have UPVC window frames and opening sashes which are approx 30years old but in good condition do I need to sand the surface before applying your All Coat Exterior Satin Ral 7016 paint or a wipe down with clean water and washing up liquid or white spirit. Secondly would your spirit based version or water based version be best. Thank you |
Answer from Rawlins’ Technical Team:
In a satin finish either water or solvent based can be used to paint UPVC. Temperature during application and curing should be considered when choosing, for temperatures ranging from 5 to 10°C we would recommend the solvent based, above these temperatures water based would be more suitable. The substrate must be clean,dry, sound and lightly sanded prior to application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Zinsser AllCoat Exterior Satin (Solvent Based) - Shades Of Grey is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Zinsser B-I-N Aerosol
White matt. For interior ceilings, walls, doors, trim, cabinets, furniture, and related paintable surfaces. Dries in minutes; can be recoated in 45 minutes. Superior adhesion to glossy surfaces without scuff sanding. High-hiding formula blocks stubborn and persistent stains. Permanently blocks odours and seals bleeding knots and sap...
Price
£17.93
(incl. VAT)
In Stock and Available for Delivery
Zinsser B-I-N
Shellac-based primer-sealer and stain killer in 1,500+ colours. For interior and spot exterior applications on ceilings, walls, doors, trim, cabinets, furniture, and more. Quick Drying: Dries to the touch in 20 minutes and can be recoated in 45 minutes. Superior Adhesion: Adheres to glossy surfaces without the need for sanding. Stain...
Price
£29.32
(incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery
Zinsser Brush Cleaner & Restorer
Removes dried-on paint from brushes, including shellac, solvent, and water-based paints. Fast-acting formula. No overnight soaking required. More effective than traditional mineral cleaners like white spirit. Contains powerful detergents for an ultra-clean finish.
Price
£8.45
(incl. VAT)
In Stock and Available for Delivery
Zinsser Mould Killer & Remover
Effective mould, fungus, and algae remover. Ideal for use on internal surfaces such as tiles, wood, plaster, and wallpaper. Perfect for bathrooms, kitchens, and high-humidity areas. Contains a powerful fungicide for a better and longer-lasting paint finish. Fast-acting formula that cleans and prepares surfaces for painting. Suitable for...
Price
£8.45
(incl. VAT)
In Stock and Available for Delivery