Fire rated sealant for linear joints and penetrations.

Sika now offer a Fire Stopping Solution Finder - a useful tool when needing assistance on specifying fire stopping solutions.

Sustainability

• Sikacryl-620 Fire conforms to LEED v4 EQc 2: Low- Emitting Materials
• Sikacryl-620 Fire is certified according "Low Emit- ting Materials as per Al Sa'fat - Dubai Green Building Evaluation System" by Dubai Central Laboratory (DCL) certificate No. CL18020589

Important Considerations

• Sikacryl-620 Fire can be overpainted. However, paints must first be tested to ensure compatibility by carrying out preliminary trials (example according to ISO technical paper: Paintability and paint compatib- ility of Sealants)
• Application during high temperature changes is not recommended (movements during the curing)
• Do not use Sikacryl®-620 Fire as glass sealer, for floor joints, sanitary joints, on natural stone, or for civil engineering applications
• Do not use Sikacryl®-620 Fire on bituminous sub- strates, natural rubber, EPDM rubber or on any building materials which might bleed oils, plasticizers or solvents that could attack the sealant
• Colour variations may occur due to exposure to chemicals, high temperatures and/or UV-radiation (especially with the colour shade white). However, a change in colour is purely of aesthetic nature and does not adversely influence the technical perform- ance or durability of the product
• Do not use Sikacryl®-620 Fire for joints under water pressure or for permanent water immersion

Approvals/Certificates

• Dubai Civil Devence (DCD), Certificate No.: CF 5463
• UL 2079
• EN 15651-1 F INT
• ISO 11600 12.5 P
• EN 1366-3 assessment report
• EN 1366-4 assessment report
• ETAG 026 assessment report
• EN 13501-2 classification report
• EN 140-3 test report
• EN 13501-1 class B-s1-d0

Application

Refer to the data sheet for consumptions rates, preparation, and application.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.