- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
High build 2K polyurethane primer used in conjunction with Selemix 2K Acrylic and PU topcoats for a system suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications.
- Gives good corrosion resistance and can be used on Steel, Cast Iron, Light Alloys, Aluminium, Painted Surfaces and Fibre-Reinforced Plastic
- This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
- Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or [email protected]
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Description
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Selemix 2K Polyurethane Direct Primer is a high build 2K polyurethane primer which may be used in a wet on wet system.
It uses the same Hardeners and Thinners as Selemix 2K Acrylic and PU topcoats, giving a simple and compact system that is suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications.
Suitable for use on Steel, Cast Iron, Light Alloys, Aluminium, Previously Painted Surfaces and Fibre-Reinforced Plastic.
This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener. This product can be purchased as a Base or Hardener separately only - please see the drop down menu above.
Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details.
For Industrial Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- High build 2K polyurethane primer
- Uses the same Hardeners and Thinners as Selemix 2K Acrylic and Polyurethane topcoats
- Suitable for use on Steel, Cast Iron, Light Alloys, Aluminium, Previously Painted Surfaces and Fibre-Reinforced Plastic
- This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
- Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or [email protected]
- For Industrial Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Steel (Blast Cleaned):
- Blast clean to ISO 8501-1 SA 2.5 with a blast profile of maximum 40 µm Rz
Steel/Cast Iron:
- Machine sand with P80-120 discs and degrease
Galvanised Steel:
- Abrade with Scotchbrite and degrease
Light Alloys and Aluminium:
- Machine sand with P280-320 discs and degrease
Painted Surfaces:
- Machine sand with P240-320 discs and degrease
Fibre Reinforced Plastic:
- Machine sand with P240 discs and degrease
Mixing
- Thoroughly mix paint before activating and check colour before use
| Features (Standard System) | Conventional Spray | Airless Spray |
|---|---|---|
|
By Weight: 4-050x Primer 9-060 / 9-065 Hardener Listed Thinner |
By Weight: 1000 130 130-150 |
By Weight: 1000 130 100-150 |
|
By Volume: 4-050x Primer 9-060 / 9-065 Hardener Listed Thinner |
By Volume: 5 1 0.65-0.75 (13-15%) |
By Volume: 5 1 0.5-0.75 (10-15%) |
| Features (9-080 Hardener) | Conventional Spray | Airless Spray |
|
By Weight: 4-050x Primer 9-080 Hardener Listed Thinner |
By Weight: 1000 160 80-120 |
By Weight: 1000 160 0-80 |
|
By Volume: 4-050x Primer 9-080 Hardener Listed Thinner |
By Volume: 4 1 0.5-0.8 (13-20%) |
By Volume: 4 1 0-0.5 (0-13%) |
| Features (9-070 Hardener) | Conventional Spray | Airless Spray |
|
By Weight: 4-050x Primer 9-070 Hardener Listed Thinner |
By Weight: 1000 140 110-130 |
By Weight: 1000 140 100-130 |
|
By Volume: 4-050x Primer 9-060 / 9-065 Hardener Listed Thinner |
By Volume: 5 1 0.65-0.75 (13-15%) |
By Volume: 5 1 0.5-0.75 (10-15%) |
| Features (With Any Hardener) | Conventional Spray | Airless Spray |
| Viscosity (at 20°C): | 20-35 secs DIN4 | 35-45 secs DIN4 |
| Pot Life (at 20°C): | 3 hours | 3 hours |
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant base and hardener/activator used.
Application Notes
| Features | Conventional Spray | Airless Spray |
|---|---|---|
| Spraygun Setup: |
Nozzle: Gravity: 1.6-1.8mm Suction: 1.8-2.0mm Pressure feed: 1.2-1.4mm |
Nozzle: 11-13-15 thou 0.28-0.33-0.38 mm |
| Air Pressure: |
Standard: 2-3 Bar |
2.5-3 Bar |
| Fluid Pressure: | N/A | 70-100 Bar |
| Number of coats: | 2 | 1-2 |
| Flash-off between coats: | 10-15 min | 5-10 min |
| Drying: | Bake at 60°C for 30-45 mins | Bake at 60°C for 30-45 mins |
| Flash-off before bake: | 10-15 min | 10-15 min |
| Wet Film Thickness: | 175-250 microns (90-150 microns per coat) | 150-250 microns (75-125 microns per coat) |
| Dry Film Thickness: | 70-100 microns | 70-120 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 5.7-6.6 m² per litre at 70 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
| Drying Times 20°C | |
|---|---|
| Dust Free | 20-30 min |
| Touch Free | 1 hour |
| Handleable | 2-3 hours |
| Sandable After | 4-6 hours |
| Hard Dry | 24 hours |
| Stoving | 30-45 minutes @60°C (according to film thickness and hardener selection) |
| Overcoating time |
Minimum: 2 hours (according to film thickness and hardener selection) Maximum: 72 hours without sanding on clean surface with any 2K Selemix Topcoat, or Selemix Basecoat |
| Please Note: Lower temperature or film thickness higher than 120µm will extend drying times | |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR INDUSTRIAL USE ONLY
Product Details
8843-933157
Data sheet
- Manufacturer
- Selemix
- For Use By
- Industrial Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Steel
Cast Iron
Light Alloy
Aluminium
Painted Surfaces
Fibre Reinforced Plastic - Sheen
- Matt
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- See Product Data Sheet
- Application
- Spray
Airless Spray - Pot Life (at 20°C)
- 3 Hours
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 24 Hours
- Dust Dry (at 20°C)
- 20-30 mins
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Base Type
- Polyurethane
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Cast Iron
- Suitable For Use On
- Light Alloys
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Compatible Existing Coatings
- Suitable For Use On
- Fibre Reinforced Plastic
- Substrate
- Aluminium
- Substrate
- Painted / Primed Metal
- Substrate
- GRP
- Substrate
- Cast Iron
- Substrate
- Light Alloys
- Substrate
- Steel
- Substrate
- Galvanised Steel
- Substrate
- Blasted Steel
- Usages
- High Solids
- Usages
- Low VOC
- Usages
- High Build
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Technologies
- Solventborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Airmix
- Application Methods
- Electrostatic
- Dry to Recoat (@ 20-25°C)
- 2 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 4-0500 2K Polyurethane Direct Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Selemix 1-470 Slow Direct Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Price
£64.49
(incl. VAT)
In Stock and Available for Delivery
Selemix 1-208 Slow Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Price
£48.85
(incl. VAT)
In Stock and Available for Delivery
Selemix 7-110 2K Acrylic Topcoat
2-pack acrylic high gloss finish in 6,700+ colours for use on agricultural, construction, earthmoving, containers, cabins, generators, storage units, machinery and signage. Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours *Note: RAL Pearl colours shown are approximations only - matches will not be exact...
Price
£257.28
(incl. VAT)
In Stock and Available for Delivery
Selemix 1-430 Acrylic Thinner
For use with selected products in the Selemix range including Selemix 7-110 2K Acrylic Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Price
£42.98
(incl. VAT)
In Stock and Available for Delivery