- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Additive for use with Selemix 7-536/7-537 2K Polyurethane Direct Topcoat (70GU) for direct application to glass where the reverse side of the glass is painted.
- Examples are kitchen splashbacks, bathroom fittings, and advertising displays
- Please see the Product Data Sheet and the Product Data Sheet for the Base Product for mixing ratios/application instructions before use
- For Industrial Use Only
Please Note - At present the additional components to use this product with Selemix 7-110 for Glitter/Sparkle effects and Transparent effects are unavailable. 6-585 can therefore only be used at present as a Glass Adhesion Promoter when used as above with Selemix 7-536/7-537 2K Polyurethane Direct Topcoat (70GU).
Selemix 6-585 Glass Adhesion Promoter is for use with Selemix 7-536/7-537 2K Polyurethane Direct Topcoat (70GU) giving an easy to use product that can be applied directly to glass for applications where the reverse side of the glass is painted. Examples are kitchen splashbacks, bathroom fittings, and advertising displays.
Please Note - At present the additional components to use this product with Selemix 7-110 for Glitter/Sparkle effects and Transparent effects are unavailable. 6-585 can therefore only be used at present as a Glass Adhesion Promoter when used as above with Selemix 7-536/7-537 2K Polyurethane Direct Topcoat (70GU).
For Industrial Use Only.
Quick Links - Click To Jump To Section:
Features & Benefits
- For use with Selemix 7-536/7-537 2K Polyurethane Direct Topcoat (70GU) giving an easy to use product that can be applied directly to glass for applications where the reverse side of the glass is painted
- Examples are kitchen splashbacks, bathroom fittings, and advertising displays
- Please see the Product Data Sheet and the Product Data Sheet for the Base Product for mixing ratios/application instructions before use
- For Industrial Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Glass
- Clean and degrease thoroughly with a solvent or alcohol-based glass cleaner
Application Notes
Please see the Product Data Sheet and the Product Data Sheet for the Base product for detailed Mixing and Application Instructions before use.
This is the standard process for glass painting to achieve solid and metallic colours when Selemix 6-585 Glass Adhesion Promoter is used with Selemix 7-536/7-537 2K Polyurethane Direct Topcoat (70GU) . The speed of drying can be increased with use of 1-490 Thinner, or 6-550 Accelerator (added at 1-2%) but these can shorten the pot life.
The use of 1-490 Thinner AND 6-550 together is not recommended.
Standard Glass Process - Conventional Spray | Solid Colours and Standard Metallic Finishes |
---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.6-1.8mm Suction: 1.8-2.0mm Pressure feed:1.2-1.4mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2-3 Bar |
Fluid Pressure: | N/A |
Number of coats: | 2-3 |
Flash-off between coats: | 5-10 mins |
Drying: | Air dry or bake at 60°C for 45 mins |
Flash-off before bake: | 5-10 mins |
Wet Film Thickness: | 100-200 microns |
Dry Film Thickness: | 50-100 microns |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR INDUSTRIAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Industrial Use
- Application Method
- Conventional Spray
- Pack Size
- 1L
- UN Number (Activator)
- N/A
- Substrate
- Glass
- Product Usage Type
- Additive
- Technologies
- Solventborne
Questions
Question about the product
Craig woods on 2024-10-05 09:59:57 | Question:
Hi there I have a customer that want their kitchen tiles painted (wall tiles) I use alot of selemix direct 2k, I was wondering if I use the glass additive this would give a good bound to the tiles. |
Answer from Rawlins’ Technical Team:
No, this product wouldn't be suitable for this type of application. Assuming the wall tiles are bare, clean, dry, sound and prepared as detailed in the technical datasheet, as an alternative you could consider Zinsser Bulls Eye 1-2-3 Primer to provide adhesion to the tiles, before 2 coats of Zinsser Perma-White Interior to finish, in your choice of many RAL, BS & NCS Colours to a matt or satin finish. This is a scrub and scuff resistant product, but not suitable for areas subject to direct water contact, or heat. Bulls Eye 1-23 can be applied by brush, roller or pad, and Perma-White Interior is suitable for applciation by brush, roller or spray. We'd recommend to apply to a small test area to check for compatibility & adhesion prior to full application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 6-585 Glass Adhesion Promoter is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 1-490 Accelerated Direct Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 6-550 Direct Accelerator
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Accelerator to give faster cure times with Selemix Direct to Metal Topcoats Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 7-536/7-537 2K Polyurethane Direct Topcoat (70 GU)
70% gloss level versatile, 2-pack PU finish for direct application without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Can also be used on Glass only if used in conjuntion with Selemix 6-585 Glass Adhesion Promoter Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to...