- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Fast-curing 2-pack, high solids, low VOC, acrylic finish in 6,700+ shades for solid colours and single-layer metallic finishes.
- Suitable for use on Painted/Primed Surfaces for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- Standard version available here
- Very High Gloss Finish - Excellent durability and UV stability
- For Industrial Use Only
Product customisation
Don't forget to save your customization to be able to add to cartSelemix 7-120 2K Acrylic UHS Topcoat (Fast Curing) is a 2-pack, high solids, low VOC, acrylic finish for solid colours and single-layer metallic finishes.
It is compatible with Selemix Epoxy and Polyurethane primers, giving a durable and hard-wearing paint system.
Selemix 7-120 has a very high gloss finish, and excellent durability and UV stability.
For the standard version of this product, please see Selemix 7-120 2K Acrylic UHS Topcoat.
It is suitable for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications where a highly durable, high gloss finish is required.
For Industrial Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- 2-pack High Gloss, High Solids, Acrylic finish
- Suitable for use on Painted/Primed Surfaces for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Excellent durability and UV stability
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- Application by conventional spray
- For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Painted Surfaces, Polyurethane or Polyester Fillers:
- Machine sand with P320-400 discs and degrease
Selemix Epoxy Primers or PU Primers:
- Refer to Primer TDS for recoat time
Mixing
- Thoroughly mix paint before activating and check colour before use
Features | Conventional Spray |
---|---|
By Weight: 7-120 Topcoat 9-130 Hardener |
1000 500 100-150 |
By Volume: 7-120 Topcoat 9-130 Hardener 1-430/1-470 Thinner |
2 1 0.2-0.3 (10-15%) |
Viscosity (at 20°C): | 20-23 secs DIN4 |
Pot Life (at 20°C): | 2 hours |
Mixing Ratio:
- Selemix 7-120 2K Acrylic UHS Topcoat (Fast Curing)
- 2 parts base : 1 part hardener
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.
Application Notes
Features | Conventional Spray |
---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.3-1.4mm Suction: 1.6-1.8mm Pressure feed: 0.85-1.2mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2-3 Bar |
Fluid Pressure: | N/A |
Number of coats: | 2 (1 light and 1 full coat) |
Flash-off between coats: | 15-20 mins |
Drying: | Air dry or bake at 60°C for 30-40 mins |
Flash-off before bake: | 10 mins |
Wet Film Thickness: | 90-100 microns |
Dry Film Thickness: | 50 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 10-11 m²/L at 50 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 20 mins |
Touch Free | 1-2 hours |
Tape Free | 10-16 hours |
Handleable | 5-6 hours |
Hard Dry | 24 hours or after bake |
Overcoating time |
Minimum: when Hard Dry Maximum: 24 hours by itself without sanding |
Please Note: Lower temperature or film thickness higher than 50µm will extend drying times |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR INDUSTRIAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Industrial Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Painted Surfaces
- Sheen
- High Gloss
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 2 to 1
- Application
- Spray
- Touch Dry (at 20°C)
- 2 hours
- Pot Life (at 20°C)
- 2 Hours
- Recommended Dry Film Thickness
- 50 microns
- Recommended Wet Film Thickness
- 90-100 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 16 Hours
- Dust Dry (at 20°C)
- 20 Mins
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- High Gloss
- Substrate
- Painted / Primed Metal
- Usages
- Low VOC
- Usages
- UV Resistant
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Force Dry Compatible
- Usages
- High Chemical Resistance
- Usages
- High UV Resistance
- Usages
- High Solids
- Product Usage Type
- Topcoat
- Technologies
- Solventborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Electrostatic
- Product Type
- Epoxy
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 2 hours
- Drying Properties
- Force Dry Compatible
- Product Attributes
- Tough / Durable
- Product Attributes
- High Solids
- Product Attributes
- Low VOC
- Resistance to
- UV
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 7-120 2K Acrylic UHS Topcoat (Fast Curing) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 1-470 Slow Direct Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-430 Acrylic Thinner
For use with selected products in the Selemix range including Selemix 7-110 2K Acrylic Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only