- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
2-pack acrylic finish in 6,700+ shades for solid colours and single-layer metallic finishes. Contains a thixotropic agent which gives a high sag resistance.
- Suitable for use on Painted/Primed Surfaces for the coating of trailers, earthmoving, agricultural and construction equipment, and many other industrial painting applications
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- High Build - Gloss Finish - Excellent durability and UV stability
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Product customisation
Don't forget to save your customization to be able to add to cartProfessional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Selemix 7-130 2K Acrylic High Build Topcoat is a 2-pack Acrylic finish for solid colours and single-layer metallic finishes. Contains a thixotropic agent which gives a high sag resistance.
It is especially suitable for airless or air-assisted airless spray equipment but can also be applied by conventional or HVLP spray.
It is compatible with Selemix Epoxy and Polyurethane primers, giving a durable and hard-wearing paint system.
Selemix 7-130 has a gloss finish with excellent durability and UV stability.
It is suitable use on Painted/Primed Surfaces for the coating of trailers, earthmoving, agricultural and construction equipment, and many other industrial painting applications.
For Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- 2-pack, High Build, Acrylic finish
- Suitable for use on Painted/Primed Surfaces for the coating of trailers, earthmoving, agricultural and construction equipment, and many other industrial painting applications
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- High Build - Gloss Finish - Excellent durability and UV stability
- Application by airless or air-assisted airless spray equipment, but can also be applied by conventional or HVLP spray
- For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Painted Surfaces, Polyurethane or Polyester Fillers:
- Machine sand with P320-400 discs and degrease
Selemix Epoxy Primers or PU Primers:
- Refer to Primer TDS for recoat time
Mixing
- Thoroughly mix paint before activating and check colour before use
Features | Conventional Spray | Air-Assisted Airless |
---|---|---|
By Weight: 7-130 Topcoat 9-090 Hardener |
1000 300 300-350 |
1000 300 250-300 |
By Volume: 7-130 Topcoat 9-090 Hardener 1-430/1-470 Thinner |
3 1 1-1.5 (30-50%) |
3 1 0.5-1 (15-30%) |
Viscosity (at 20°C): | 25-28 secs DIN4 | 28-30 secs DIN4 |
Pot Life (at 20°C): | 2-3 hours | 2-3 hours |
Mixing Ratio:
- Selemix 7-130 2K Acrylic High Build Topcoat
- 3 parts base : 1 part hardener
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.
Application Notes
Features | Conventional Spray | Airless Spray |
---|---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.5-1.6mm Suction: 1.8-2.0mm Pressure feed: 1.0-1.4mm |
Nozzle: 9-11 thou 0.23-0.28mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2-3 Bar |
2-4 Bar |
Fluid Pressure: | N/A | 70-100 Bar |
Number of coats: | 2 | 2 |
Flash-off between coats: | 5-10 mins | 5-10 mins |
Drying: | Air dry or bake at 60°C for 40-50 mins | Air dry or bake at 60°C for 40-50 mins |
Flash-off before bake: | 5-10 mins | 5-10 mins |
Wet Film Thickness: | 220-225 microns | 170-200 microns |
Dry Film Thickness: | 80-90 microns | 80-100 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 4.3-5.2 m²/L at 90 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 30 mins |
Touch Free | 1-2 hours |
Tape Free | 24 hours |
Handleable | 24 hours |
Hard Dry | 24 hours or after bake |
Overcoating time |
Minimum: when Hard Dry Maximum: 24 hours by itself without sanding |
Please Note: Lower temperature or film thickness higher than 100µm will extend drying times |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Painted Surfaces
- Sheen
- Gloss
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 3 to 1
- Application
- Spray
Airless Spray - Touch Dry (at 20°C)
- 2 hours
- Pot Life (at 20°C)
- 2-3 Hours
- Recommended Dry Film Thickness
- 80-100 microns
- Recommended Wet Film Thickness
- 170-200 microns (depending on application method - see Data Sheet)
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 24 Hours
- Dust Dry (at 20°C)
- 30 Mins
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Substrate
- Painted / Primed Metal
- Usages
- High Build
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Force Dry Compatible
- Usages
- Sag Resistance
- Usages
- High Chemical Resistance
- Usages
- High UV Resistance
- Usages
- High Solids
- Usages
- UV Resistant
- Product Usage Type
- Topcoat
- Technologies
- Solventborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Airmix
- Application Methods
- Electrostatic
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 2 hours
- Drying Properties
- Force Dry Compatible
- Product Attributes
- Low VOC
- Product Attributes
- Tough / Durable
- Product Attributes
- High Solids
- Resistance to
- UV
- Resistance to
- Sag
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 7-130 2K Acrylic High Build Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 1-470 Slow Direct Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-430 Acrylic Thinner
For use with selected products in the Selemix range including Selemix 7-110 2K Acrylic Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only