- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempel Hempadur Epoxy Sealer is a low viscosity, two pack epoxy varnish with good penetration properties for saturation of well cleaned concrete floors before application of pigmented paints.
- Also suitable for sealing of thermally sprayed metallic coatings
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory H
For professional use only.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- Low viscosity, two pack epoxy varnish
- Good penetration properties
- For saturation of well cleaned concrete surfaces before application of pigmented paints
- Suitable for sealing of thermally sprayed metallic coatings
- Hard dry in 4 hours
- Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory H
- Excellent service temperature: Maximum, dry exposure only: 140°C
Application
- For new build, maintenance and repair
- Mixing ratio: Base 05999 : Curing agent 95040 (4 : 1 by volume)
- If required thin with Hempel Thinner 08450, max vol. 5%
- Applicable by brush or airless spray (Nozzle pressure: 100 bar [1500 psi] Nozzle orifice: 0.017-0.021")
- Must be applied in such an amount that the surface is just saturated. The surface should not appear "glossy" in any way
- Surface temperature must be above 10°C during application and curing
- To avoid condensation, apply on a clean and dry surface with a temperature that is at least 3°C above the dew point
- Temperature of product must be above 15°C during application
- Clean equipment after use with Hempel Tool Cleaner 99610
Limitations
- The surface must not appear glossy after application, the coating shall only seal the surface. Any surplus top layer must be removed prior to application of subsequent coat
- To obtain the drying time stated, it is important to maintain sufficient ventilation during application, drying and curing
- If the maximum overcoating interval is exceeded, roughening of the surface is necessary to ensure intercoat adhesion
- Epoxy coats have an inherent tendency of chalking in outdoor exposure. This does not affect the performance of the coating
- Handle with care. Before and during use, observe safety labels on packaging and paint containers and follow all local and national safety regulations. Always consult Hempel’s Safety Data Sheet for this product along with the Product Data Sheet
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
- For Use On
- Concrete Floors
- Application Method
- Brush, airless spray
- Sheen
- Flat
- VOC Levels
- 750 g/L
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Mixing Ratio
- Base 05999 : Curing agent 95040 (4 : 1 by volume)
- Pot Life (at 20°C)
- 8 hours
- Coverage
- 10 m²/L
- Recommended Thinner/Cleaner
- Hempel's Thinner 08450 / Hempel's Tool Cleaner 99610
- Min. Application Temperature
- 15°C
- Solids by Volume
- 29 ± 2%
- Heat Resistance (up-to)
- Maximum, dry exposure only: 140°C
- Heat Resistance (up-to)
- Maximum, dry exposure only: 140°C
- Shelf Life (from date of manufacture)
- 36 months @ 25°C
- Recommended Dry Film Thickness
- 30 microns
- Recommended Wet Film Thickness
- 100 microns
- UN Number
- UN1263
- Specific Gravity
- 0.9 kg/L
- Hard Dry
- (20°C) 4 hours
- Flashpoint
- 25°C
- Colour(s)
- Clear
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Floors
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Spray
- Components
- 2K
- Product Usage Type
- Sealer
- Product Usage Type
- Varnish
- Product Range
- Hempadur Epoxy Sealer
- Colour Family
- Clear
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempadur Epoxy Sealer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Hempel Thinner 08450
Hempel's Thinner 08450 is a general purpose thinner for Hempadur qualities. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned with the thinner prescribed for the product
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...