- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Fast-curing, versatile, high solids 2-pack Acrylic PU finish with 6,700+ colours for direct application without a primer to steel, galvanised steel, aluminium and painted/primed surfaces.
- Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- High gloss finish with good colour and UV stability
- Also available in Slow and Medium curing versions
- Hammer Effects can be achieved by the additon of Selemix 6-540
- For Industrial Use Only
Product customisation
Don't forget to save your customization to be able to add to cartSelemix 7-159 Direct Pro High Gloss (Fast) is a versatile, high solids 2-pack Acrylic PU finish that can be applied directly to a variety of substrates without need for a primer.
It has a high gloss finish with good colour and UV stability. Its good anticorrosive properties make it suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications.
Application is via Air-Assisted Airless Spray or Conventional Spray.
For Industrial Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- Versatile, high solids 2-pack Acrylic PU finish
- Can be applied directly to metal
- Suitable for use on Steel, Galvanised Steel, Aluminium and Painted/Primed Surfaces
- Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- High gloss finish with good colour and UV stability
- Also available in Slow and Medium curing versions
- For Industrial Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Steel (Blast Cleaned):
- Blast clean to ISO 8501-1 SA 2.5 with a blast profile of maximum 40 µm Rz
Steel:
- Machine sand with P80-120 discs and degrease
Galvanised Steel:
- Abrade with SCOTCHBRITE® and degrease
Aluminium:
- Machine sand with P240-320 discs and degrease
Painted Surfaces:
- Machine sand with P240-320 discs and degrease
Selemix Epoxy Primer or PU Primer:
- Refer to Primer TDS for recoat time
Mixing
- Thoroughly mix paint before activating and check colour before use
Features | Conventional Spray | Air-Assisted Airless |
---|---|---|
By Weight: 7-159 Topcoat 9-15x Hardener |
1000 330 100-200 |
1000 330 50-100 |
By Volume: 7-159 Topcoat 9-15x Hardener 1-159/1-160 Thinner |
2.5 1 0.3-0.5 (10-20%) |
2.5 1 0.1-0.3 (5-10%) |
Viscosity (at 20°C): | 28-35 secs DIN4 | 40-45 secs DIN4 |
Pot Life (at 20°C): | 2.5-3 hours | 1.5-2 hours |
Mixing Ratio:
- Selemix 7-159 Direct Pro High Gloss (Fast)
- 2.5 parts base : 1 part hardener
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.
Application Notes
Features | Conventional Spray | Airless Spray |
---|---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.8mm Suction: 1.8-2.0mm Pressure feed: 1.2-1.4mm |
Nozzle: 9-11 thou 0.23-0.28mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2.5-3 Bar |
2.5 Bar |
Fluid Pressure: | N/A | 100 Bar |
Number of coats: | 2 | 2 |
Flash-off between coats: | 15 mins | 15-20 mins |
Drying: | Air dry or bake at 60°C for 30-45 mins | Air dry or bake at 60°C for 30-45 mins |
Flash-off before bake: | 10-15 mins | 10-15 mins |
Wet Film Thickness: | 150-175 microns (2 x 75-100µm) | 150-175 microns |
Dry Film Thickness: | 90-110 microns | 90-110 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- Conventional Spray - 5.5-6.0 m²/L
- Air-Assisted Airless Spray - 5.8-6.3 m²/L
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 20 mins (or 15 mins with Fast Hardener) |
Touch Free | 3 hours (or 2 hours with Fast Hardener) |
Tape Free | 6 hours (or 3 hours with Fast Hardener) |
Handleable | 8-10 hours (or 5-6 hours with Fast Hardener) |
Hard Dry | 16 hours (or 12-14 hours with Fast Hardener) |
Stoving | 30 minutes at 50°C (according to film thickness) |
Overcoating time |
Minimum: when Hard Dry Maximum: 1 months by itself without sanding |
Please Note: Lower temperature or film thickness higher than 100µm will extend drying times |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR INDUSTRIAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Industrial Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Steel
Galvanised Steel
Aluminium
Painted Surfaces - Sheen
- 90% Gloss
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 2.5 to 1
- Application
- Spray
Airless Spray - Touch Dry (at 20°C)
- 2 hours
- Pot Life (at 20°C)
- 2.5-3 hours Conventional Spray / 1.5-2 hours Airless Spray
- Recommended Dry Film Thickness
- 90-110 microns
- Recommended Wet Film Thickness
- 150-175 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 16 hours (or 12-14 hours with Fast Hardener)
- Dust Dry (at 20°C)
- 20 mins (or 15 mins with Fast Hardener)
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Compatible Existing Coatings
- Finish
- High Gloss
- Substrate
- Steel
- Substrate
- Galvanised Steel
- Substrate
- Blasted Steel
- Substrate
- Aluminium
- Substrate
- Painted / Primed Metal
- Usages
- High Solids
- Usages
- Process Efficiency
- Usages
- Low VOC
- Usages
- UV Resistant
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Colour Retention
- Usages
- Force Dry Compatible
- Usages
- Stoving Compatible
- Usages
- Direct to Metal
- Usages
- High Corrosion Resistance
- Usages
- High Chemical Resistance
- Usages
- High UV Resistance
- Technologies
- Solventborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Airmix
- Application Methods
- Electrostatic
- Product Type
- Acrylic Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 2 hours
- Drying Properties
- Force Dry Compatible
- Drying Properties
- Stoving Compatible
- Product Attributes
- High Solids
- Product Attributes
- Anti-Corrosive
- Product Attributes
- Colour Retention
- Resistance to
- UV
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 7-159 Direct Pro High Gloss (Fast) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 7-159 Direct Pro High Gloss (Slow)
Selemix 7-159 Direct Pro High Gloss (Slow) is a versatile, high solids 2-pack Acrylic PU finish that can be applied directly to a variety of substrates without need for a primer. Suitable for use on Steel, Galvanised Steel, Aluminium and Painted/Primed Surfaces Good anticorrosive properties - Suitable for the finishing and protection of...
Selemix 1-159 Reactive Thinner For Acrylic
For use with selected products in the Selemix range including Selemix 7-159 Direct Pro High Gloss. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-160 Slow Reactive Thinner For Acrylic
For use with selected products in the Selemix range including Selemix 7-159 Direct Pro High Gloss. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Industrial Use Only
Selemix 7-159 Direct Pro High Gloss (Medium)
Versatile, high solids 2-pack Acrylic PU finish with 6,700+ colours for direct application without a primer for steel, galvanised steel, aluminium and painted/primed surfaces. Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting...
Selemix 6-540 Hammer Effect Additive
A silicone additive for Selemix solventborne cellulose, polyurethane and fast dry synthetic topcoats to achieve attractive Hammer Effect finishes. For use with: Selemix 7-610 and 7-611 Fast Dry Synthetic Topcoats Selemix 1K Cellulose Topcoats 7-510 Polyurethane Topcoat Selemix Direct Pro High Gloss (first coat must be sprayed without...