- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tintable primer with 6,700+ colours and a fast drying time for use in a wet on wet system when recoated with 2K Topcoats.
- For use on Steel, Cast Iron, Aluminium, Light Alloys, GRP & Previously Painted Surfaces
- Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural & construction equipment & many other industrial painting applications
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- For faster curing please see Selemix 7-413 2K Epoxy Primer (Fast Curing)
- For Professional Use Only
Product customisation
Don't forget to save your customization to be able to add to cartSelemix 7-413 2K Epoxy Primer is a tintable 2K Epoxy primer that can be used on a wide range of substrates. Its fast drying performance allows 7-413 Epoxy Primer to be used in a wet on wet system when recoated with 2K Topcoats.
For use on Steel, Cast Iron, Aluminium, Light Alloys, GRP & Previously Painted Surfaces.
It has good anticorrosive properties making it suitable for the finishing and protection of machinery, agricultural, construction and earthmoving equipment, containers, cabins, generators, storage units, machinery and signage and many other industrial painting applications.
Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours.
*Note: RAL Pearl colours shown are approximations only - matches will not be exact.
For Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- Tintable 2K Epoxy primer that can be used on a wide range of substrates
- For use on Steel, Cast Iron, Aluminium, Light Alloys, GRP & Previously Painted Surfaces
- Good anticorrosive properties make it suitable for the finishing and protection of machinery, agricultural, construction and earthmoving equipment, containers, cabins, generators, storage units, machinery and signage as well as many other industrial painting applications
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- For faster curing please see Selemix 7-413 2K Epoxy Primer (Fast Curing)
- For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Steel (Blast Cleaned):
- Blast clean to ISO 8501-1 SA 2.5 with a blast profile of maximum 40 µm Rz
Steel/Cast Iron:
- Machine sand with P80-120 discs and degrease
Galvanised Steel:
- Abrade with SCOTCHBRITE® and degrease
Phosphated Steel:
- Degrease
Aluminium and Light Alloys:
- Machine sand with P240-320 discs and degrease
GRP:
- Machine sand with P240 discs and degrease
Painted Surfaces:
- Machine sand with P240-320 discs and degrease
Do not use over wash primers or 1K synthetic primers.
Mixing
- Thoroughly mix paint before activating and check colour before use
Features | Conventional Spray | Air-Assisted Airless |
---|---|---|
By Weight: 7-413 Primer (Tinted) 9-010/9-011 Hardener |
1000 200 250-300 |
1000 200 90-100 |
By Volume: 7-413 Primer (Tinted) 9-010/9-011 Hardener 1-410/1-400 Thinner |
3.5 1 1-1.6* (30-45%) |
3.5 1 0.5 (15%) |
Viscosity (at 20°C): |
18-30 secs DIN4 (*according to expected film build ) |
30-35 secs DIN4 |
Pot Life (at 20°C): | 6 hours | 6 hours |
Mixing Ratio:
- Selemix 7-413 2K Epoxy Primer
- 3.5 parts base : 1 part hardener
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.
Application Notes
Features | Conventional Spray | Airless Spray |
---|---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.6-1.8mm Suction: 1.8-2.0mm Pressure feed: 1.2-1.4mm |
Nozzle: 13-15 thou 0.33-0.38mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2.5-3 Bar |
2.5 Bar |
Fluid Pressure: | N/A | 100-120 Bar |
Number of coats: | 2 | 2 |
Flash-off between coats: | 10-15 mins | 10-15 mins |
Drying: | Air dry 2 hours at 20°C or bake at 60°C for 50-60 mins |
Air dry 2 hours at 20°C or bake at 60°C for 50-60 mins |
Flash-off before bake: | 10-15 mins | 10-15 mins |
Wet Film Thickness: | 100-200 microns | 100-200 microns |
Dry Film Thickness: | 40-80 microns | 40-80 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 7.1-7.5 m²/L at 50 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 20-30 mins |
Handleable | 6-8 hours |
Hard Dry | 24 Hours |
Stoving | 50-60 minutes @60°C (according to film thickness) |
Overcoating time |
Minimum: 2 hours Maximum: 3 weeks without sanding on clean surface with any 2K Selemix Topcoat Before recoating for Selemix 7-540 Basecoat, primer must be air dried for at least 16 hours, or baked |
Please Note: Lower temperature or film thickness higher than 80µm will extend drying times |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Steel
Aluminium
Light Alloy
GRP
Painted Surfaces - Sheen
- Matt
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 3.5 to 1
- Application
- Spray
Airless Spray - Pot Life (at 20°C)
- 6 hours
- Recommended Dry Film Thickness
- 40-80 microns
- Recommended Wet Film Thickness
- 100-200 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 24 hours
- Dust Dry (at 20°C)
- 20-30 minutes
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Zinc
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Cast Iron
- Suitable For Use On
- Light Alloys
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- GRP
- Suitable For Use On
- Compatible Existing Coatings
- Suitable For Use On
- Phospated Steel
- Suitable For Use On
- Fibre-Reinforced Plastic
- Substrate
- Light Alloys
- Substrate
- Phosphated Steel
- Substrate
- Aluminium
- Substrate
- Painted / Primed Metal
- Substrate
- GRP
- Substrate
- Cast Iron
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Technologies
- Solventborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Airmix
- Application Methods
- Electrostatic
- Dry to Recoat (@ 20-25°C)
- 2 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 7-413 2K Epoxy Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 1-400 Slow Epoxy Thinner
For use with selected products in the Selemix range including Selemix 7-410 2K Epoxy Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-410 Epoxy Thinner
For use with selected products in the Selemix range including Selemix 7-410 2K Epoxy Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only