Selemix 7-414 2K Epoxy Vinyl Primer (Fast Curing) | 6,700+ Colours

Selemix 7-414 2K Epoxy Vinyl Primer (Fast Curing)

Search ID SEL8986

We no longer stock this product, but can recommend Selemix 7-413 2K Epoxy Primer (Fast Curing) as a great alternative.

Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are in any doubt please first contact our technical team on 0113 2455450 (option 2) or send a message to [email protected] where we will be happy to discuss your project.

Product customisation

Don't forget to save your customization to be able to add to cart

Quantity

Product not available

This Product has been Discontinued

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

No queries yet, leave the first!

Description

Selemix 7-414 2K Epoxy Vinyl Primer (Fast Curing) is a fast drying tintable primer which may be used in a wet-on-wet system. It can be used over a wide range of substrates and can be recoated without sanding even after a long period.

For use on Steel, Cast Iron, Light Alloys & Previously Painted Surfaces on Machinery, Signage and Metal Fabrication.

Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours.

*Note: RAL Pearl colours shown are approximations only - matches will not be exact.

For Professional Use Only.

Quick Links - Click To Jump To Section:

Features & Benefits
Surface Preparation
Mixing
Application Notes
Theoretical Coverage
Drying Times
Health & Safety

Features & Benefits

Fast drying tintable primer which may be used in a wet-on-wet system
It can be used over a wide range of substrates and can be recoated without sanding even after a long period
For use on Steel, Cast Iron, Light Alloys & Previously Painted Surfaces
Suitable for use on Machinery, Signage and Metal Fabrication
Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
Product can be purchased as a Two Component Pack, or as Base or Hardener only
For standard curing please see Selemix 7-414 2K Epoxy Vinyl Primer
For Professional Use Only

Surface Preparation

Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.

Steel (Blast Cleaned):

Blast clean to ISO 8527-1 SA 2.5 with a blast profile of maximum 40 µm Rz.
Note: A first coat of 7-413 Epoxy Primer is recommended before spraying a second coat with 7-414

Steel/Cast Iron:

Machine sand with P80-120 discs and degrease

Light Alloys:

Machine sand with P280-320 discs and degrease

Phosphated Steel:

Abrade with SCOTCHBRITE® and degrease

Painted Surfaces:

Machine sand with P240-320 discs and degrease

Do not use over wash primers or 1K synthetic primers.

Mixing

Thoroughly mix paint before activating and check colour before use

Features	Conventional Spray
By Weight: 7-414 Primer (Tinted) 9-010/9-011 Hardener 1-410/1-400 Thinner	By Weight: 1000 100 400-500
By Volume: 7-414 Primer (Tinted) 9-010/9-011 Hardener 1-410/1-400 Thinner	By Volume: 9 1 4-5 (45-55%)
Viscosity (at 20°C):	25-25 secs DIN4
Pot Life (at 20°C):	8-10 hours

Mixing Ratio:

Selemix 7-414 2K Epoxy Vinyl Primer (Fast Curing)
- 9 parts base : 1 part hardener

Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.

Application Notes

Features	Conventional Spray
Spraygun Setup:	Nozzle: Gravity: 1.6-1.8mm Suction: 1.8-2.0mm Pressure feed: 1.2-1.4mm
Air Pressure:	HVLP: 2 Bar Standard: 2.5-3 Bar
Fluid Pressure:	N/A
Number of coats:	2
Flash-off between coats:	10-15 mins
Drying:	Air dry 2 hours at or bake at 60°C for 30-45 mins
Flash-off before bake:	10-15 mins
Wet Film Thickness:	150-200 microns
Dry Film Thickness:	40-50 microns

Please see the Product Data Sheet for detailed Application Instructions before use.

Theoretical Coverage

4.5-5m²/L at 50 microns DFT

Note: Please see the Product Data Sheet for detailed information.

Drying Times

Drying Times 20°C
Dust Free	15-20 mins
Handleable	2-3 hours
Hard Dry	24 Hours
Stoving	30-45 minutes @60°C (according to film thickness)
Overcoating time	Minimum: 2 hours Maximum: 2 months without sanding on clean surface with any 2K Selemix Topcoat
Please Note: Lower temperature or film thickness higher than 50µm will extend drying times

Health & Safety

For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
THIS PRODUCT IS FOR PROFESSIONAL USE ONLY

Product Details

Data sheet

Manufacturer: Selemix
For Use By: Professional Use
Water / Solvent Based: Solvent Based
For Use On: Steel
Light Alloy
Painted Surfaces
Sheen: Matt
Single, Two or Three Pack: Two-Pack
Mixing Ratio: 9 to 1
Application: Spray
Pot Life (at 20°C): 8-10 hours
Recommended Dry Film Thickness: 40-50 microns
Recommended Wet Film Thickness: 150-200 microns
UN Number (Activator): UN1263
UN Number (Base): UN1263
Hard Dry: 24 hours
Dust Dry (at 20°C): 15-20 minutes
Colour(s): Fully Tintable
Base Type: Solvent-Based
Base Type: Epoxy
Suitable For Use On: Cast Iron
Suitable For Use On: Light Alloys
Suitable For Use On: Phosphated Steel
Suitable For Use On: Compatible Existing Coatings
Suitable For Use On: Steel
Substrate: Steel
Substrate: Blasted Steel
Substrate: Painted / Primed Metal
Substrate: Cast Iron
Substrate: Light Alloys
Substrate: Phosphated Steel
Usages: Quick Drying
Usages: Atmospheric
Product Usage Type: Primer
Technologies: Solventborne
Technologies: 2K
Application Methods: Electrostatic
Application Methods: Conventional
Dry to Recoat (@ 20-25°C): 2 hours

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet - Base

Download

Safety Data Sheet - Activator

Download

Selemix System Technical Chart

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Selemix 7-414 2K Epoxy Vinyl Primer (Fast Curing) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Selemix 1-400 Slow Epoxy Thinner

For use with selected products in the Selemix range including Selemix 7-410 2K Epoxy Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only

£53.20 (incl. VAT)

Shop now

In Stock and Available for Delivery

Selemix 1-410 Epoxy Thinner

£50.05 (incl. VAT)

Shop now

In Stock and Available for Delivery

Selemix 7-413 2K Epoxy Primer

Tintable primer with 6,700+ colours and a fast drying time for use in a wet on wet system when recoated with 2K Topcoats. For use on Steel, Cast Iron, Aluminium, Light Alloys, GRP & Previously Painted Surfaces Good anticorrosive properties - Suitable for the finishing and protection of machinery, agricultural & construction...

£497.32 (incl. VAT)

Shop now

In Stock and Available for Delivery