Follow us on:

Selemix 7-512 2K Polyurethane Extra Topcoat (Accessible) | 6,700+ Colours
Selemix 7-512 2K Polyurethane Extra Topcoat (Accessible) | 6,700+ Colours

Selemix 7-512 2K Polyurethane Extra Topcoat (Accessible)

SEL8998

High gloss 2-pack Polyurethane finish 'Accessible' version due to the use of 9-070 PU Direct Hardener/Activator. 6,700+ colours for coating machinery, agricultural and construction equipment, and many other industrial painting applications where a durable finish is required.

  • High Gloss with very good durability
  • Compatible with Selemix Epoxy & PU primers, giving a durable, hard wearing paint system
  • For solid colours and single-layer metallic finishes.
  • Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
    • *Note: RAL Pearl colours shown are approximations only - matches will not be exact
  • Product can be purchased as a Two Component Pack, or as Base or Hardener only
  • Also available in Standard, Slow Curing and HD UV versions

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Product Type
Colour Group
Size
Finish
£101.75(incl. VAT)
£84.79(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Selemix 7-512 2K Polyurethane Extra Topcoat (Accessible) is a high gloss 2-pack Polyurethane finish for solid colours and single-layer metallic finishes. 'Accessible' version due to the use of 9-070 Hardener/Activator.

It is compatible with Selemix Epoxy and Polyurethane primers, giving a durable and hard wearing paint system. 

Suitable for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications where a durable finish is required.

Also available in Standard (which also available in Semi-Gloss and Semi-Matt options), Slow Curing and HD UV versions.

Application can be by conventional spray or air assisted airless spray.

Please note when 7-512 is used with 9-070 Hardener it is only available in High Gloss. 

For Professional Use Only.



Quick Links - Click To Jump To Section:




Features & Benefits


  • High quality 2-pack Polyurethane finish for solid colours and single-layer metallic finishes
  • High Gloss with very good durability
  • Compatible with Selemix Epoxy & PU primers, giving a durable, hard wearing paint system
  • Suitable for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications where a durable finish is required
  • Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
    • *Note: RAL Pearl colours shown are approximations only - matches will not be exact
  • Product can be purchased as a Two Component Pack, or as Base or Hardener only
  • Also available in Standard, Slow Curing and HD UV versions
  • For Professional Use Only



Surface Preparation


Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.

Painted Surfaces/Polyurethane or Polyester Fillers:

  • Machine sand with P320-400 discs and degrease

Selemix Epoxy Primers or PU Primers:

  • Refer to Primer TDS for recoat time



Mixing


  • Thoroughly mix paint before activating and check colour before use



Features Conventional Spray Air-Assisted Airless

By Weight:

7-512 Topcoat

9-070 Hardener

1-420/1-208/1-470 Thinner

By Weight:

1000

300

140-280

By Weight:

1000

300

140-280 (use 1-208/1-470)

By Volume:

7-512 Topcoat

9-070 Hardener

1-420/1-208/1-470 Thinner

By Volume:

3

1

0.5-1 (15-30%)

By Volume:

3

1

0.5-1 (15-30%) (use 1-208/1-470)

Viscosity (at 20°C): 18-20 secs DIN4 20-25 secs DIN4
Pot Life (at 20°C): 1.5 hours 1.5 hours



Mixing Ratio:

  • Selemix 7-512 2K Polyurethane Extra Topcoat (Accessible)
    • 3 parts base : 1 part hardener 

Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.



Application Notes


Features Conventional Spray Airless Spray
Spraygun Setup:

Nozzle:

Gravity: 1.3-1.4mm

Suction: 1.6-1.8mm

Pressure feed: 0.85-1.2mm

Nozzle:

9-11 thou

0.23-0.28mm

Air Pressure:

HVLP: 2 Bar

Standard: 2-3 Bar

2.5 Bar
Fluid Pressure: N/A 80-100 Bar
Number of coats: 2 2
Flash-off between coats: 10-15 mins 10-15 mins
Drying: Air dry or bake at 60°C for 30-40 mins Air dry or bake at 60°C for 30-40 mins
Flash-off before bake: 10 mins 10 mins
Wet Film Thickness: 120 microns 120 microns
Dry Film Thickness: 50 microns 50 microns



Please see the Product Data Sheet for detailed Application Instructions before use.



Theoretical Coverage


  • 7.8-8.5m²/L at 50 microns DFT

Note: Please see the Product Data Sheet for detailed information.



Drying Times


Drying Times 20°C
Dust Free 10-15 mins
Touch Free 1-1.5 hours
Tape Free 16 hours
Handleable 4-5 hours
Hard Dry 10-12 hours or after bake
Overcoating time

Minimum: When Hard Dry

Maximum: 24 hours by itself without sanding

Please Note: Lower temperature or film thickness higher than 50µm will extend drying times





Health & Safety


  • For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
  • THIS PRODUCT IS FOR PROFESSIONAL USE ONLY

Product Details
8998-938989

Data sheet

Manufacturer
Selemix
For Use By
Professional Use
Water / Solvent Based
Solvent Based
For Use On
Painted Surfaces
Primed Surfaces
Sheen
High Gloss
Single, Two or Three Pack
Two-Pack
Mixing Ratio
3 to 1
Application
Spray
Airless Spray
Touch Dry (at 20°C)
90 Mins
Pot Life (at 20°C)
1.5 hours
Recommended Dry Film Thickness
50 microns
Recommended Wet Film Thickness
120 microns
UN Number (Activator)
UN1263
UN Number (Base)
UN1263
Hard Dry
10-12 hours or after bake
Dust Dry (at 20°C)
10-15 minutes
Colour(s)
Fully Tintable
Base Type
Solvent-Based
Suitable For Use On
Primed Surfaces
Finish
High Gloss
Substrate
Painted / Primed Metal
Usages
High UV Resistance
Usages
Atmospheric
Usages
Tough/Durable
Usages
Force Dry Compatible
Product Usage Type
Topcoat
Technologies
Solventborne
Technologies
2K
Application Methods
Electrostatic
Application Methods
Conventional
Application Methods
Airmix
Product Type
Alkyd
Environment
Atmospheric
Touch Dry/Dust Free (@ 20-25°C)
90 mins
Drying Properties
Force Dry Compatible
Product Attributes
Tough / Durable
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Selemix 7-512 2K Polyurethane Extra Topcoat (Accessible) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Film Thickness
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

    

You might also like
Selemix 1-470 Slow Direct Thinner| Rawlins Paints

Selemix 1-470 Slow Direct Thinner

For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only

Price £64.49 (incl. VAT)
Shop now
In Stock and Available for Delivery
Selemix 1-208 Slow Thinner | Rawlins Paints

Selemix 1-208 Slow Thinner

For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only

Price £48.85 (incl. VAT)
Shop now
In Stock and Available for Delivery
Selemix 2K Polyurethane Direct Primer |  High Build Metal Primer

Selemix 4-0500 2K Polyurethane Direct Primer

High build 2K polyurethane primer used in conjunction with Selemix 2K Acrylic and PU topcoats for a system suitable for the finishing and protection of machinery, agricultural and construction equipment, and many other industrial painting applications. Gives good corrosion resistance and can be used on Steel, Cast Iron, Light Alloys,...

Price £244.01 (incl. VAT)
Shop now
In Stock and Available for Delivery
Selemix 1-420 Polyurethane Thinner | Rawlins Paints

Selemix 1-420 Polyurethane Thinner

For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Primer. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only

Price £13.75 (incl. VAT)
Shop now
In Stock and Available for Delivery