- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Intercoat AC Glasscoat SL301 is a 2-pack pigmented coating which offers direct adhesion onto glass without the use of an adhesion primer.
When correctly used should meet the General Use requirements of FIRA6250.
For professional use only.
Product customisation
Don't forget to save your customization to be able to add to cartApplication
- For professional use only
- Ensure surface to be coated is clean, dry and free from contamination
- Mix product in a non-corrosive container. Spray 1 coat
- Mix ratio 10:1 vol 08670 catalyst
- Thin with Thinner 13920 if required
- Apply at 80 microns WFT/ 30 microns DFT. Coverage rate 12m²/l
- Dries in 2 hours at 20°C to handle, 16 hours hard-dry
- Cures in 30 minutes at 40°C
Note: Any over-spray dust formed during the coating process e.g. in spray areas, MUST be thoroughly damped with water prior to disposal, due to the possibility of spontaneous combustion.
Data sheet
- Manufacturer
- Intercoat
- For Use By
- Professional Use
- For Use By
- Industrial Use
- For Use On
- Glass
- Application Method
- Spray
- Sheen
- Matt
- VOC Levels
- Approx 462 grams/litre
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Coverage
- 12m²/l
- Shelf Life (from date of manufacture)
- 12 months
- Recommended Dry Film Thickness
- 30 microns
- Recommended Wet Film Thickness
- 80 microns
- UN Number
- UN1263
- Drying time
- 2 hours at 20°C to handle, 16 hours hard-dry
- Pot Life
- Up to 24 hours
- Fully Cured
- 30 minutes at 40°C
- Viscosity
- 70 seconds B4 @ 20°C
- Solids by Weight
- Typically 60%
- Flashpoint
- 22-32°C
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Glass
- Finish
- Matt
- Application Method
- Spray
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Intercoat AC Glasscoat SL301 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Intercoat Acid Catalyst 08670
Intercoat Acid Catalysts 08670 are acid catalyst solutions suitable for use with Intercoat acid-catalysed lacquers and enamels. Designed for use with the full and modified pigmented A/C enamels and also certain other types including A/C flooring lacquer. For professional use only. More Information Delivery Info
Intercoat Thinner for High-Solids A/C 13920
Intercoat Thinner for High-Solids A/C 13920 solvent thinner formulated to reduce the viscosity of high-solid A/C lacquers and enamels. For professional use only. More Information Delivery Info