- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Solvent-free, flexible, two-component polyurethane coating for new and old concrete floors exposed to moderate mechanical and chemical stress. Typical applications include air-conditioning rooms.
- Elongation at break 180% (7 d).
- Extremely low VOC-content.
- Water impermeable coating for new and old concrete floors exposed to moderate mechanical and chemical stress.
- Very good impact resistance.
- Self-levelling, to be applied with serrated or steel trowel.
- M1 classification.
- For professional and industrial use only.
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Application
Refer to the downloadable data sheet (from the Data Sheets tab above) for technical information and application instructions.
Prime using Temafloor 400, Temafloor Primer, Temafloor 220W or Fontefloor EP Primer epoxy varnish, thinned according to instructions in the respecitve products' data sheet.
Data sheet
- Manufacturer
- Tikkurila
- For Use By
- Professional Use
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 3:1
- Coverage
- Film thickness 2 mm coverage approx. 2 liters/m²
- Drying time
- Fully cured after 7 days
- Drying time
- Dust dry after 2 hours
- Drying time
- Overcoatable after 24 hours
- Pot Life
- 23°C: 15 minutes on substrate, 10 minutes on the mixing container. Pour the whole mixture onto the floor all at once.
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Asphalt
- Finish
- Gloss
- Components
- 2K
- Product Usage Type
- Self Smoothing Screed
- Product Range
- Temafloor
- Colour Family
- Grey
- Fire Rating
- Cfl-s1
- Average Application Thickness
- 1mm
- Product Type
- Polyurethane
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temafloor PU Flex is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Fontefloor EP Primer
2-component water-borne epoxy lacquer that seals the concrete surface and provides adhesion to all Temafloor coatings and screeds, and Fontefloor paints, and can also be used for patching cracks and holes in concrete. Dries in 6 hours for overcoating Also used for priming of damp concrete with relative humidity over 97% prior to Fontefloor...
Tikkurila Temafloor 220W Primer
2 component solvent-free varnish used for priming of new and old concrete floors, especially where solventless and odourless products are needed. For priming of new and old concrete floors prior to laying Temafloor coatings and screeds. Good resistance against oil and grease. Suitable for priming of damp concrete (relative humidity of the...
Tikkurila Temafloor 400
2-component solvent-free epoxy varnish. An excellent product for dust binding and priming of new and old concrete floors, especially where solventless and odourless products are needed. The lacquer can be used for patching when filled with sand. Used as a binder for Temafloor 4000 troweling screed and epoxy concrete. Used also as a topcoat...