- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Intercoat EnviroLa/c Low Odour A/C Clear Lacquer is a fast drying, 2-component lacquer type formulated with a low-odour solvent and resin combination to minimise emissions. Part of the Intercoat Envirola/c range.
- Tested to 6250 and meets the Severe Use rating in areas of wet and dry heat, resistance to alcohol and mechanical damage
- Available in 5 sheen levels
For professional use only.
Quick Links - Click To Jump To Section:
Application
- For professional use only
- Interior use only
- For most wood substrates
- Ensure that all surfaces to be coated are clean, dry and free from contamination
- Mix ratio 10 : 1 volume 40000 catalyst
- It is recommended to mix sufficient for each days use
- If necessary thin with up to 5% Thinner 40991
- Apply by spray
- Normally 2 coats of the product are applied with adequate drying and sanding between coats
- Apply at 80 microns WFT/30 microns DFT
- Coverage rate 12m² per litre
- Touch Dry, 15-20 Min. Sanding time, 30-45 mins (Depending on ambient temperature and airflow)
Limitations
- Do not use in any combination with polyurethane coatings
- Do not apply over light coloured paints
- Discolouration may occur over certain light coloured woods due to the action of the acid catalyst
Data sheet
- Manufacturer
- Intercoat
- For Use By
- Professional Use
- For Use On
- Wood
- Application Method
- Spray
- Sheen
- 10% Matt
20% Semi-Matt
30% Satin
50% Semi-Gloss
80% Gloss - VOC Levels
- 535 - 545 g/l
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 22.5L
- Coverage
- 12m² per litre
- Recommended Thinner/Cleaner
- Thinner 40991
- Shelf Life (from date of manufacture)
- 12 months
- Touch Dry
- 15 - 20 minutes
- Recommended Dry Film Thickness
- 30 microns
- Recommended Wet Film Thickness
- 80 microns
- UN Number
- UN1263
- Viscosity
- 45-50 sec B4 @ 20°C
- Solids by Weight
- 43 - 45%
- Flashpoint
- Below 22°C
- Colour(s)
- Clear
- Base Type
- Solvent-Based
- Suitable For Use On
- Wood
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Finish
- Semi-Gloss
- Finish
- Semi-Matt
- Application Method
- Spray
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Intercoat EnviroLa/c Low Odour A/C Clear Lacquer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Intercoat EnviroLa/c Low Odour A/C Basecoat 40090
Intercoat EnviroLa/c Low Odour A/C Basecoat 40090 is a fast drying acid-catalysed basecoat with good sanding properties formulated with a low-odour solvent and resin combination to minimise emissions. Part of the Intercoat Envirola/c range Tested to 6250 and meets the Severe Use rating in areas of wet and dry heat, resistance to alcohol...
Intercoat EnviroLa/c Low Odour A/C Primer
Intercoat EnviroLa/c Low Odour A/C Primer is a fast drying, 2-component enamel formulated with a low-odour solvent and resin combination to minimise emissions. Part of the Intercoat Envirola/c range UK’s lowest formaldehyde content For professional use only. More Information Delivery Info
Intercoat Acid Catalyst 40000
Intercoat Acid Catalyst 40000 is an acid catalyst solution suitable for use with Intercoat acid-catalysed lacquers and enamels. Designed for use with the full and modified pigmented A/C enamels and also certain other types including A/C flooring lacquer Suitable for use with Intercoat Envirola/c For professional use only. More...
Intercoat Thinner 40991
Intercoat Thinner 40991 is a specially formulated solvent blend for thinning the Intercoat EnviroLa/c system. For professional use only. More Information Delivery Info