- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
One-pack fast drying synthetic anti-rust primer with good adhesion on bare steel. For agricultural and building site machinery, carpentry and items made of ferrous metal.
- Compatible with all Selemix 1K Topcoats and 2K Polyurethane and Acrylic Topcoats
- Also suitable for use on Painted Surfaces and Polyurethane or Polyester Fillers
- Available in Grey (3-0800) and Red (3-0081)
- For Professional Use Only
Please note: Colours shown are for illustrative purposes only
Selemix 3-0800/3-0801 1K Synthetic Primer is a one-pack fast drying synthetic anti-rust primer with good adhesion on bare steel. It is particularly recommended for agricultural and building site machinery, carpentry and items made of ferrous metal.
It can be recoated with all Selemix 1K Topcoats and 2K Polyurethane and Acrylic Topcoats.
It is particularly recommended for agricultural and building site machinery, carpentry and items made of ferrous metal.
For Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- One-pack fast drying synthetic anti-rust primer
- It is particularly recommended for agricultural and building site machinery, carpentry and items made of ferrous metal.
- It can be recoated with all Selemix 1K Topcoats and 2K Polyurethane and Acrylic Topcoats
- Also suitable for use on Painted Surfaces and Polyurethane or Polyester Fillers
- Available in Grey (3-0800) and Red (3-0081)
- For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Bare Steel:
- Machine sand with P80-120-150 discs and degrease
Painted Surfaces Polyurethane or Polyester Fillers:
- Machine sand with P320-400 discs and degrease
Mixing
- Thoroughly mix paint before diluting
Features | Conventional Spray | Air-Assisted Airless |
---|---|---|
By Weight: 3-0080/3-0081 Primer |
By Weight: 1000 0-50 |
By Weight: 1000 0 |
By Volume: 3-0080/3-0081 Primer 1-610/1-215/1-205 Thinner |
By Volume: 10 0.0.5 (0-5%) |
By Volume: 10 0 (no thinner) |
Viscosity (at 20°C): | 20-25 secs DIN4 | 35-40 secs DIN4 |
Pot Life (at 20°C): | Unlimited | Unlimited |
Application Notes
Features | Conventional Spray | Airless Spray |
---|---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.4-1.8mm Suction: 1.6-1.8mm Pressure feed: 1.0-1.2mm |
Nozzle: 11 thou 0.28mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2.5-3 Bar |
2.5 Bar |
Fluid Pressure: | N/A | 70-100 Bar |
Number of coats: | 2 | 2 |
Flash-off between coats: | 5-7 mins | 5-7 mins |
Drying: |
Air dry |
Air dry |
Wet Film Thickness: | 125-150 microns | 125-150 microns |
Dry Film Thickness: | 50-60 microns | 50-60 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 8.7-9.1m² per litre at 50 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 10-15 min |
Handleable | 30-60 mins |
Hard Dry | 24 hours |
Stoving | Not recommended |
Overcoating time |
Minimum: 1 hour Maximum: 1 month without sanding on clean surface with any 1K or 2K Selemix Topcoat except Epoxy topcoats |
Please Note: Lower temperature or film thickness higher than 60µm will extend drying times |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Bare Steel
Painted Surfaces
Polyurethane or Polyester Fillers - Sheen
- Matt
- Single, Two or Three Pack
- Single
- Mixing Ratio
- N/A
- Application
- Spray
Airless Spray - Pot Life (at 20°C)
- Unlimited
- UN Number (Base)
- UN1263
- Hard Dry
- 24 Hours
- Dust Dry (at 20°C)
- 10-15 mins
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Base Type
- Synthetic
- Suitable For Use On
- Steel
- Suitable For Use On
- Compatible Existing Coatings
- Substrate
- Steel
- Substrate
- Painted / Primed Metal
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Technologies
- Solventborne
- Technologies
- 1K
- Application Methods
- Conventional
- Application Methods
- Airmix
- Application Methods
- Electrostatic
- Dry to Recoat (@ 20-25°C)
- 60 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 3-0800/3-0801 1K Synthetic Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 1-205 Aromatic Free Thinner
For use with selected products in the Selemix range including Selemix 3-0800/3-0801 1K Synthetic Primer. Please note: Available in a 25L pack size only Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-215 Nitro Cellulose Thinner
For use with selected products in the Selemix range including Selemix 3-0800/3-0801 1K Synthetic Primer. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-610 Synthetic Thinner
For use with selected products in the Selemix range including Selemix 3-0800/3-0801 1K Synthetic Primer. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only