- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Intercoat Modified A/C Primer is a modified acid catalysed primer with low hydrocarbon content and excellent hiding power designed to offer faster drying than the conventional types.
- For hardboard and most woods, and especially suitable for priming MDF
- For use as a primer only, and must be overcoated with an acid catalysed enamel
For professional use only.
Application
- For professional use only
- Suitable for MDF, Hardboard and most woods
- For use as a primer only. Do not apply over clear or polyurethane coatings. Must be overcoated with an acid catalysed enamel
- Ensure that all surfaces to be coated are clean, dry and free from contamination
- Mix 10.1 with Acid Catalyst 08670
- Thinner 13920 may be used to reduce viscosity if required
- Spray 1 or 2 coats. Too many coats can cause cracking
- Only use recommended topcoats- pigmented acid-catalysed enamels for best results - and sand between coats
- Normally overcoated with acid-catalysed enamels and many other coating types can be used (check adhesion first)
- Apply at 80 microns WFT/ 25 microns DFT
- Coverage rate 12m² per litre
- Touch Dry 20 mins. Sandable in 60 mins under normal conditions
- Black primer: If the primer is used over MDF, 08350 must be used. In other circumstances, 08760 may be used
- Any over-spray dust formed during the coating process e.g. in spray areas, MUST be thoroughly damped with water prior to disposal, due to the possibility of spontaneous combustion
Data sheet
- Manufacturer
- Intercoat
- For Use By
- Professional Use
- For Use On
- MDF, Hardboard and most woods
- Application Method
- Spray
- VOC Levels
- 504 - 581 g/l
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 22.5L
- Coverage
- 12m² per litre
- Shelf Life (from date of manufacture)
- 12 months
- Touch Dry
- 20 minutes
- Recommended Dry Film Thickness
- 25 microns
- Recommended Wet Film Thickness
- 80 microns
- Pot Life
- 8 - 12 hours
- Viscosity
- White, Grey: 100 sec BS B4 @ 20°C (as supplied), Viscosity after addition of acid is approx. 60 secs BS B4
Black: 65-70 sec BS B4 @ 20°C (as supplied), Viscosity after addition of acid is approx. 60 secs BS B4 - Solids by Weight
- 44 - 61%
- Flashpoint
- Below 22°C
- Colour(s)
- White, Mid-Grey, Black
- Base Type
- Solvent-Based
- Suitable For Use On
- MDF
- Suitable For Use On
- Wood
- Application Method
- Spray
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Intercoat Modified A/C Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Intercoat Acid Catalyst 08670
Intercoat Acid Catalysts 08670 are acid catalyst solutions suitable for use with Intercoat acid-catalysed lacquers and enamels. Designed for use with the full and modified pigmented A/C enamels and also certain other types including A/C flooring lacquer. For professional use only. More Information Delivery Info
Intercoat Thinner for High-Solids A/C 13920
Intercoat Thinner for High-Solids A/C 13920 solvent thinner formulated to reduce the viscosity of high-solid A/C lacquers and enamels. For professional use only. More Information Delivery Info