- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Intercoat Modified AC Enamel is a modified acid-catalysed enamel designed to give faster drying than conventional A/C systems while offering similar performance.
- Designed to meet the General Use Requirements of BS6250
- Suitable for primed MDF and most wood substrates
- Available in 4000+ colours in RAL and BS and 7 sheen levels
Also available in Black or White.
For professional use only.
Product customisation
Don't forget to save your customization to be able to add to cartQuick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- Available in 4000+ colours in RAL and BS
- Available in 10% - 80% Gloss
- Modified acid-catalysed enamel
- Designed to give faster drying than conventional A/C systems while offering similar performance
- Designed to meet the General Use Requirements of BS6250
- Suitable for primed MDF and most wood substrates
Application
- Ensure that all surfaces to be coated are clean, dry and free from contamination
- Mix 10 : 1 vol 08670 catalyst, thin using Thinner 13920 if necessary
- Use within 24 hours of mixing
- Spray 1 or 2 coats over a modified A/C primer such as Intercoat Modified A/C Primer. Too many coats can cause cracking
- Apply at 80-100 microns WFT/25-30 microns DFT. Coverage rate 10-12m2 per litre
- Touch-Dry 30 mins. Hard-Dry 2 hours
Limitations
- Do not use in combination with polyurethane coatings
- Full performance properties may not obtained until about four weeks after application
- Any over-spray dust formed during the coating process e.g. in spray areas, MUST be thoroughly damped with water prior to disposal, due to the possibility of spontaneous combustion
Data sheet
- Manufacturer
- Intercoat
- For Use By
- Professional Use
- For Use On
- Wood and MDF
- Application Method
- Spray
- Sheen
- 10-80% Gloss
- VOC Levels
- Typically 505 grams per litre
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L, 22.5L
- Mixing Ratio
- 10 : 1 vol 08670 catalyst
- Coverage
- 10 - 12m2 per litre
- Recommended Thinner/Cleaner
- Thinner 13920
- Shelf Life (from date of manufacture)
- 12 months
- Touch Dry
- 30 minutes
- Recommended Dry Film Thickness
- 25-30 microns
- Recommended Wet Film Thickness
- 80-100 microns
- Pot Life
- Use within 24 hours of mixing
- Viscosity
- 65-75 sec B4 @ 20°C
- Solids by Weight
- Approx 52%
- Hard Dry
- 2 hours
- Flashpoint
- Below 22°C
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- MDF
- Suitable For Use On
- Wood
- Application Method
- Spray
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Intercoat Modified AC Enamel SL200 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Intercoat Acid Catalyst 08670
Intercoat Acid Catalysts 08670 are acid catalyst solutions suitable for use with Intercoat acid-catalysed lacquers and enamels. Designed for use with the full and modified pigmented A/C enamels and also certain other types including A/C flooring lacquer. For professional use only. More Information Delivery Info
Intercoat Thinner for High-Solids A/C 13920
Intercoat Thinner for High-Solids A/C 13920 solvent thinner formulated to reduce the viscosity of high-solid A/C lacquers and enamels. For professional use only. More Information Delivery Info
Intercoat Modified A/C Primer
Intercoat Modified A/C Primer is a modified acid catalysed primer with low hydrocarbon content and excellent hiding power designed to offer faster drying than the conventional types. For hardboard and most woods, and especially suitable for priming MDF For use as a primer only, and must be overcoated with an acid catalysed enamel For...
Intercoat Modified A/C Enamel
Intercoat Modified A/C Enamel is a modified acid-catalysed enamel designed to give faster drying than conventional A/C systems while offering similar performance. Designed to meet the General use requirements of BS6250 Suitable for spray application to primed MDF and most wood substrates Also available in 4000+ colours in RAL and BS...