- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Intercoat Modified A/C Enamel is a modified acid-catalysed enamel designed to give faster drying than conventional A/C systems while offering similar performance.
- Designed to meet the General use requirements of BS6250
- Suitable for spray application to primed MDF and most wood substrates
Also available in 4000+ colours in RAL and BS
For professional use only.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- Modified acid-catalysed enamel
- Faster drying than conventional A/C systems while offering similar performance
- Designed to meet the General use requirements of BS6250
- Suitable for spray application to primed MDF and most wood substrates
Application
- Ensure that all surfaces to be coated are clean, dry and free from contamination
- Mix ratio 10 : 1 vol 08670 catalyst
- Use within 8 hours of mixing
- Spray 1 or 2 coats, sand between coats
- Coverage rate 10-12m2 per litre
- Touch-dry 30 mins. Hard-dry 2 hours
Limitations
- Too many coats can cause cracking
- Only use recommended topcoats- pigmented acid-catalysed enamels for best results
- Do not use combination with polyurethane coatings
- Any over-spray dust formed during the coating process e.g. in spray areas, MUST be thoroughly damped with water prior to disposal, due to the possibility of spontaneous combustion
Data sheet
- Manufacturer
- Intercoat
- For Use By
- Professional Use
- For Use On
- MDF
- Application Method
- Spray
- Sheen
- 10% - Full Gloss
- VOC Levels
- 511 - 576 g/l
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5.5, 24.75L
- Mixing Ratio
- 10 : 1 vol 08670 catalyst
- Coverage
- 10-12m2 per litre
- Touch Dry
- 30 minutes
- Recommended Dry Film Thickness
- 25 - 30 microns
- Recommended Wet Film Thickness
- 80 - 100 microns
- Pot Life
- 8 hours
- Viscosity
- 60-70 seconds B4 @ 20°C
- Solids by Weight
- 45 - 53%
- Hard Dry
- 2 hours
- Flashpoint
- Below 22°C
- Colour(s)
- Black, White
- Base Type
- Solvent-Based
- Suitable For Use On
- MDF
- Suitable For Use On
- Wood
- Application Method
- Spray
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Intercoat Modified A/C Enamel is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Intercoat Acid Catalyst 08670
Intercoat Acid Catalysts 08670 are acid catalyst solutions suitable for use with Intercoat acid-catalysed lacquers and enamels. Designed for use with the full and modified pigmented A/C enamels and also certain other types including A/C flooring lacquer. For professional use only. More Information Delivery Info
Intercoat Modified AC Enamel SL200
Intercoat Modified AC Enamel is a modified acid-catalysed enamel designed to give faster drying than conventional A/C systems while offering similar performance. Designed to meet the General Use Requirements of BS6250 Suitable for primed MDF and most wood substrates Available in 4000+ colours in RAL and BS and 7 sheen levels Also...