- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A high-gloss one-pack Nitrocellulose finish for painted/primed surfaces and polyurethane or polyester fillers available in 6,700+ colours.
- It is suitable for the painting and refurbishment of fixtures and fittings, machinery and equipment, and many other industrial painting applications
- Very fast drying - Compatible with Selemix 1K Fast Dry Primers
- Also available in Matt and Gloss versions
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- Hammer Effects can be achieved by the additon of Selemix 6-540
- For Professional Use Only
Product customisation
Don't forget to save your customization to be able to add to cartSelemix 7-330 1K Cellulose Extra Gloss Topcoat is a one-pack high-gloss Nitrocellulose finish for solid colours and single-layer metallic finishes. It is suitable for the painting and refurbishment of fixtures and fittings, machinery and equipment, and many other industrial painting applications where a fast drying high-gloss finish is required.
Compatible with Selemix 1K Fast Dry Primers.
Also available in Matt and Gloss versions.
Please note: Other gloss levels are achievable when combined with 7-320 Gloss Binder (prior to tinting) to give semi-gloss and semi-matt finishes - please contact our Technical Department before placing an order on 0113 2455450 (option 2) or send a message to [email protected] for details.
For Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- High-gloss one-pack Nitrocellulose finish
- Suitable for the painting and refurbishment of fixtures and fittings, machinery and equipment, and many other industrial painting applications where a fast drying high-gloss finish is required
- Compatible with all Selemix Fast Dry Primers
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Painted Surfaces Polyurethane or Polyester Fillers:
- Machine sand with P320-400 discs and degrease
Selemix 1K primers:
- 7-810 1K Synthetic Fast Dry Primer
- 7-820 1K Synthetic Extra Fast Dry Primer
- 3-0800/3-0801 1K Synthetic Primer
- Refer to Primer TDS for recoat time
Mixing
- Thoroughly mix paint before activating and check colour before use
Features | Conventional Spray |
---|---|
By Weight: 7-330 Topcoat |
By Weight: 1000 400-600 |
By Volume: 7-330 Topcoat 1-215/1-205 Thinner |
By Volume: 4 2-3 (50-75%) |
Viscosity (at 20°C): | 18-22 secs DIN4 |
Pot Life (at 20°C): | Unlimited |
Application Notes
Features | Conventional Spray |
---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.3-1.4mm Suction: 1.6-1.8mm Pressure feed: 0.85-1.2mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2-3 Bar |
Fluid Pressure: | N/A |
Number of coats: | 2-3 |
Flash-off between coats: | 10-15 mins |
Drying: |
Air dry |
Dry Film Thickness: | 35-45 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 4.7-5.8m² per litre at 40 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 10-15 min |
Touch Free | 40-60 min |
Tape Free | 12-16 hours |
Handleable | 60-80 min |
Hard Dry | 24 hours |
Overcoating time |
Minimum: 6 hours Maximum: 24 hours by itself without sanding |
Please Note: Lower temperature or film thickness higher than 45µm will extend drying times |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Painted Surfaces
Polyurethane or Polyester Fillers
Primed Surfaces - Sheen
- High-Gloss
- Single, Two or Three Pack
- Single
- Mixing Ratio
- N/A
- Application
- Spray
- Touch Dry (at 20°C)
- 60 mins
- Pot Life (at 20°C)
- Unlimited
- UN Number (Base)
- UN1263
- Hard Dry
- 24 Hours
- Dust Dry (at 20°C)
- 10-15 mins
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- High Gloss
- Substrate
- Painted / Primed Metal
- Usages
- Atmospheric
- Product Usage Type
- Topcoat
- Technologies
- Solventborne
- Technologies
- 1K
- Application Methods
- Conventional
- Application Methods
- Electrostatic
- Product Type
- Epoxy
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 7-330 1K Cellulose Extra Gloss Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 3-0800/3-0801 1K Synthetic Primer
One-pack fast drying synthetic anti-rust primer with good adhesion on bare steel. For agricultural and building site machinery, carpentry and items made of ferrous metal. Compatible with all Selemix 1K Topcoats and 2K Polyurethane and Acrylic Topcoats Also suitable for use on Painted Surfaces and Polyurethane or Polyester Fillers...
Selemix 1-205 Aromatic Free Thinner
For use with selected products in the Selemix range including Selemix 3-0800/3-0801 1K Synthetic Primer. Please note: Available in a 25L pack size only Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-215 Nitro Cellulose Thinner
For use with selected products in the Selemix range including Selemix 3-0800/3-0801 1K Synthetic Primer. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 7-810 1K Synthetic Fast Dry Primer
A one-pack fast-drying synthetic primer with good filling properties available in 6,700+ colours. Suitable for use on Steel and previously painted surfaces. Compatible with all Selemix 1K Fast Dry Topcoats It is suitable for the coating of machinery, agricultural and construction equipment, and many other industrial painting applications...
Selemix 7-820 1K Synthetic Extra Fast Dry Primer
A one-pack extra fast-drying synthetic primer with high filling and good anticorrosive properties available in 6,700+ colours. Suitable for use on Steel and previously painted surfaces. Compatible with Selemix 1K Fast Dry Topcoats It is suitable for the coating of machinery, agricultural and construction equipment, and many other...
Selemix 6-540 Hammer Effect Additive
A silicone additive for Selemix solventborne cellulose, polyurethane and fast dry synthetic topcoats to achieve attractive Hammer Effect finishes. For use with: Selemix 7-610 and 7-611 Fast Dry Synthetic Topcoats Selemix 1K Cellulose Topcoats 7-510 Polyurethane Topcoat Selemix Direct Pro High Gloss (first coat must be sprayed without...