- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A thick water-based acrylic paint style coating that seals, resurfaces, and transforms damaged, worn, and drab asphalt and concrete. Easily applied by roller, it creates a tough flexible surface for cars and pedestrians.
- For use on driveways, car parks, playgrounds
- No primer required
- Quick drying (24 hours for light traffic)
- Excellent UV and weathering resistance
- Suitable for pedestrian and light-medium traffic (cars, not HGV’s or forklifts)
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Watco Asphalt & Concrete Resurfacer is a water based acrylic coating that seals and resurfaces damaged and worn asphalt. Easily applied by roller, it forms a flexible, sealed, waterproof surface that transforms old asphalt, concrete, and tarmac. It provides a tough flexible surface for cars and pedestrians.
Quick Links - Click To Jump To Section:
Features & Benefits
- Areas of use include:
- Car parks
- Playgrounds
- Driveway
- Single pack, easily roller applied
- Non-hazardous and low odour acrylic formula
- Excellent adhesion and covering power
- Quick drying (24 hours for light traffic)
- Excellent resistance to UV and weathering
- Can be applied up to a maximum depth of 1mm in one application. Multiple coats can be applied for badly worn patches
- Suitable for pedestrian and light-medium traffic (cars, not HGV’s or forklifts)
- Do not apply too thickly in one application. This can cause a delay in the drying process and may lead to cracking.
- Produces a tough, flexible layer. However, if applied over a crack (when the crack has been caused by movement) it may crack if significant movement re-occurs. The product is sufficiently flexible to tolerate the usual expansion and contraction associated with asphalt.
- Will seal the substrate and as such could add to puddling on poorly drained areas during wet weather. Apply only in dry, warm (above 10°C) conditions when rain is not forecast.
Surface Preparation
Ensure surfaces are clean, dry and free of loose material. If the surface has been previously painted, remove as much paint as possible by mechanical means. Any remaining paint should be well bonded and lightly abraded to provide a key.
Watco Bio-D, a bio-degradable water based degreasant can be used for grease removal from concrete and asphalt.
Mixing
Stir the contents well with a wide bladed mixing tool to ensure that the product has not settled in transit.
Application
Apply only in dry conditions (above 10°C and below 35°C). Do not apply in cold, damp conditions or when rain is forecast.
In warmer conditions 25°C - 35°C dry, hot surfaces should be slightly dampened first.
Pour onto the surface in ribbons and spread it out with a medium pile roller.
Apply thinly. The second coat can be applied as soon as the first coat has dried. Further thin multiple coats can be applied for badly worn areas.
Important – Do not apply the product in layers thicker than 1 mm. Never add water to the product.
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Water
- For Use On
- Concrete
- For Use On
- Asphalt surfaces
- Application Method
- Medium pile roller
- Single, Two or Three Pack
- Single
- Pack Size
- 25KG
- Minimum Applied Thickness
- 1mm
- Coverage
- Approx 15m2 at 1mm thick
- Recommended Thinner/Cleaner
- Wash in warm, soapy water before the product dries, otherwise soak for 24 hours in White Spirit.
- Max. Application Temperature
- 35°c
- Min. Application Temperature
- Above 10°C
- Touch Dry
- Ready for light traffic:
24 hours at 10°C - 15°C
15 - 20 hours at 15°C - 30°C - UN Number
- N/A
- Base Type
- Water-Based
- Suitable For Use On
- Tarmac
- Suitable For Use On
- Asphalt Driveways
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Concrete Driveways
- Suitable For Use On
- Driveways
- Suitable For Use On
- Tarmac Driveways
- Suitable For Use On
- Playgrounds
- Suitable For Use On
- Asphalt Floors
- Suitable For Use On
- Car Parks
- Suitable For Use On
- Tarmac Floors
- Suitable For Use On
- Damaged Asphalt Floors
- Suitable For Use On
- Damaged Concrete Floors
- Suitable For Use On
- Damaged Tarmac Floors
- Suitable For Use On
- Worn Asphalt Floors
- Suitable For Use On
- Worn Concrete Floors
- Suitable For Use On
- Worn Tarmac Floors
- Suitable For Use On
- Concrete
- Suitable For Use On
- Drab Asphalt Floors
- Suitable For Use On
- Floors
- Suitable For Use On
- Drab Concrete Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Drab Tarmac Floors
- Application Method
- Roller
- Components
- 1K
- Dry for Heavy Traffic
- 2 - 3 days at 10°C - 15°C
2 days at 15°C - 30°C - Colour Family
- Grey
- Colour Family
- Red
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Asphalt & Concrete Resurfacer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT