- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Reinforced anti-slip waterproof protection for roofs - roller applied, tough fibre reinforced polyurethane membrane to waterproof and seal flat and pitched roofs.
- No primer required
- Seals and protects roofs from water ingress
- Use on flat and pitched roofs and around existing pipe work and extrusions
- Ultra-tough, UV resistant membrane
- Fibre-reinforced for extra protection and durability
- Highly flexible – won’t split with roof movement
- Excellent slip resistance even in the wet
Available in original and anti-slip versions.
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Description
Watco Liquid Roof Membrane is a high performance, high build, roller applied coating, designed to waterproof and protect flat and pitched roofs.
This exceptional waterproofer offers seamless protection against water ingress and can also be used around pipes and extrusions. Liquid Roof Membrane is highly flexible and ‘moves’ with the roof without cracking or splitting, and has excellent UV resistance which protects against fading and weathering.
This single pack, cold applied coating is quick and easy to use over large areas. If applying over an existing similar type coating to offer additional protection, one coat is sufficient. Two coats are recommended on previously untreated surfaces simply to ensure that no patches are missed and there is a complete waterproof film.
Anti-Slip Liquid Roof Membrane provides extra safety for maintenance or emergency access routes.
Quick Links - Click To Jump To Section:
Features & Benefits
- Seals and protects roofs from water ingress
- Use on flat and pitched roofs and around existing pipe work and extrusions
- Superior waterproofing properties - prolongs the life of your roof
- High performance, seamless finish – no joins, no leaks
- Excellent resistance to UV and weathering
- Can be applied to slightly damp surfaces
- High elasticity coating – ‘moves’ with the roof to reduce splitting or cracking
- Cold applied
- Single pack high build coating – easy to use and covers well
- Available in a coarsely textured anti-slip version for added safety
Surface Preparation
Inspect the entire surface to ensure the substrate is sound and not weak, loose, flaking or defective.
Where necessary, carry out repairs to cracks, holes, blisters, etc. prior to applying Liquid Roof Membrane. Our technical team will be happy to advise you on the best repair material to use for your particular application.
Ensure the roof is clean and dry (although slight damp is acceptable) and free from all loose debris and roof contaminants. All fungal growth and moss should be treated with a suitable fungicidal cleaner. General dirt and contamination can be removed with Watco Bio-D, a biodegradable solvent free degreaser.
Application
Do not apply if rain is forecast within 48 hours.
The coating should be thoroughly stirred and must not be thinned.
Joints/Protrusions – Apply generous amounts to areas at a higher risk of water ingress such as joints and protrusions with a paint brush prior to the application of the main coating.
Main Coating – Apply by roller and work well into the surface. Use a paint brush for the edges. If applying over an existing similar type coating to offer additional protection, one coat is sufficient. Two coats are recommended on previously untreated surfaces simply to ensure that no patches are missed and there is a complete waterproof film.
The second coat can be applied after a minimum of 16 hours (based on a temperature of 20°C) and should be applied within 7 days. If more than 7 days elapse the first coat should be lightly abraded before the second coat is applied and the first coat should be checked to ensure it’s clean and free of any debris/moss, etc.
Anti-Slip Liquid Roof Membrane – Once the second coat has been applied, simply scatter the grit evenly over the wet coating and leave to dry. Use as much or as little grit to achieve the desired anti slip effect.
Limitations
Do not apply to wet/icy surfaces or if surface/air temperatures are below 8 °C, or in saturated air conditions. Do not apply if RH is above 85%. Do not apply if rain is forecast within 48 hours. Do not apply in cold static conditions.
At least two coats of product must be applied at the prescribed coverage rates. The first coat must be fully reinforced with Reinforcing Scrim.
This product is not recommended for waterproofing gutters. On solid sheeted pitched roofs, attention to lap joints, bolt heads, etc. will be required.
Test Results
Anti-slip version only - Slip Resistance BS7976-2 - 66 PTV
Standard Compliance
- BREEAM COMPLIANT
- VOC LEVEL 175g/Litre medium
- ISO 16000
- REACH COMPLIANT
Product Details
9139-947087
Data sheet
- Manufacturer
- Watco
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Concrete
Asphalt
Flat Roofs
Pitched Roofs - Application Method
- Medium pile roller. Cut in using a brush.
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
15L - Touch Dry (at 20°C)
- 8 hours
- Dry to Recoat (at 20°C)
- Minimum – 24 hours
Maximum – 7 days - Coverage
- 5 - 7 m² per 5 litre unit and 14 - 21 m² per 15 litre unit depending on substrate
- Min. Application Temperature
- Air Temperature 15°C
Surface Temperature 10°C. - Layer Thickness
- 0.9mm per coat
- Dry to Recoat (at 10°C)
- Minimum – 48 hours
Maximum – 3 days - Touch Dry (at 10°C)
- 16 hours
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Flat Roofs
- Suitable For Use On
- Pitched Roofs
- Suitable For Use On
- Asphalt
- Finish
- Semi-Gloss
- Application Method
- Roller
- Product Usage Type
- Waterproofer
- Product Usage Type
- Sealer
- Product Range
- Liquid Roof
- Colour Family
- Grey
Questions
Question about the product
Lydia
on
2024-09-26 11:58:52
| Question:
Hi…approximately how many L do I need to cover 300 square m? |
Answer from Rawlins’ Technical Team:
Based on a recommended minimum 2 coat application for previously untreated surfaces, with a coverage rating of 14-21 m2 per 15L unit, you would require approximately 43 x 15L tins to cover an area of 300m2 in total. However, only one coat is required on an existing similar coating substrate. | |
|
Jack brown
on
2024-05-30 14:46:15
| Question:
I have a patio with a room under it measures 5mtrx5mtr how much sealer do I need and what cost |
Answer from Rawlins’ Technical Team:
Thanks for your enquiry, please e-mail [email protected] with more information and pictures, in order for us to assist fully. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Liquid Roof Membrane is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
