- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
For filling deep holes in asphalt and concrete, up to 200mm in one application, in heavily trafficked areas like car parks or loading bays.
- Three-component
- A blend of graded granite aggregate and epoxy resin
- No primer required
- Easy to apply with a tamper
- Hardwearing epoxy formula
- Suitable for forklift and heavy traffic areas
- Good general resistance to many chemicals commonly found in industry. Please contact us for advice regarding other chemicals
Watco Bitu-Mend Deep Fill is ideal for filling deep holes (up to 200mm) in asphalt and concrete, without the need to make up the repair in layers. The epoxy resin formulation provides high strength throughout the depth of the repair making it ideal for heavily trafficked areas.
Quick Links - Click To Jump To Section:
Features & Benefits
- Three-component
- A blend of graded granite aggregate and epoxy resin
- Cures to a hard, black, slip resistant finish
- No primer required
- Can be applied at any thickness from 15mm - 200mm
- Suitable for use inside and out
- Ready for use in 12 hours
- Good general resistance to many chemicals commonly found in industry. Please contact us for advice regarding other chemicals
Surface Preparation
Ensure the void to be filled is clean, dry (slight damp is acceptable) and sound.
Mixing
Mixing is easier on a board, but it can be done in the plastic container provided. Empty the contents of the smaller Curing Agent tin into the larger Resin tin and mix thoroughly using a palette knife or similar wide bladed tool. Immediately empty the mixed components onto the granite aggregate. Mix using a trowel to achieve a loose textured black compound. Ensure that the dry aggregate is thoroughly coated.
Application
Tip the mixed product into the void and work into any gaps and crevices with a trowel. Lightly tamp down with a piece of wood, compacting the product to remove air pockets. Finish with a trowel wiped with white spirit for a smooth finish.
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Asphalt surfaces
- Application Method
- Trowel
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 25KG
- Coverage
- The volume of a 25kg pack is approximately 15 litres. As a guide this would cover approximately 0.5m² at 30mm thick.
- UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3082
- Pot Life
- Approximately 30 minutes at 10°C - 20°C, less in higher temperatures.
- Fully Cured
- Can be walked on after 8-12 hours and subject to heavy traffic after 12-24 hours (all at 10°C - 20°C). Lower temperatures will extend the curing time.
- Base Type
- Solvent-Based
- Suitable For Use On
- Tarmac
- Suitable For Use On
- Asphalt
- Application Method
- Trowel
- Product Usage Type
- Repair
- Product Range
- Bitu-Mend
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Bitu-Mend Deep Fill is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT