- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
For the strongest ever asphalt repairs in car parks and loading bays where forklifts and lorries operate. Cures to a hard, black, slip resistant finish that is ready for use in 12 hours.
- Can be applied at any thickness from 10mm -100mm
- Can also be used on concrete
- Ideal for use on splits and cracks in asphalt, roller shutter door guide rails, gangways, and work areas
- A blend of graded granite aggregate and epoxy resin
- Three-component
- No primer required
Watco Bitu-Mend Advanced is ideal for filling holes in asphalt and similar type floors. The epoxy resin formulation is much stronger and longer lasting than traditional bitumen-based products. It’s strength allows for thinner repairs than conventional products and it is ideal for heavily trafficked areas. It has good general resistance to many chemicals commonly found in Industry. Please contact us for advice regarding other chemicals.
Quick Links - Click To Jump To Section:
Features & Benefits
- Cures to a hard, black, slip resistant finish
- Can be applied at any thickness from 10mm -100mm
- Can also be used on concrete
- Ready for use in 12 hours
- Areas of use include:
- Potholes in asphalt and tarmac
- Gangways and work areas
- Car parks and loading bays where forklifts and lorries operate
- Splits and cracks in asphalt
- Roller shutter door guide rails
Surface Preparation
Ensure the void to be filled is clean, dry (slight damp is acceptable) and sound.
Mixing
Mixing is easier on a board, but it can be done in the plastic container provided. Empty the contents of the smaller Curing Agent tin into the larger Resin tin and mix thoroughly using a palette knife or similar wide bladed tool. Immediately empty the mixed components onto the granite aggregate. Mix using a trowel to achieve a loose textured black compound. Ensure that the dry aggregate is thoroughly coated.
Application
Tip the mixed product into the void and work into any gaps and crevices with a trowel. Lightly tamp down with a piece of wood, compacting the product to remove air pockets. Finish with a trowel.
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
- For Use On
- Asphalt surfaces
- Application Method
- Trowel
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 25KG
- Coverage
- Approximately 1m2 at 15mm thick
- UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3082
- Pot Life
- Approximately 30 minutes at 10°C - 20°C, less in higher temperatures.
- Fully Cured
- Can be walked on after 8-12 hours and subject to heavy traffic after 12-24 hours (all at 10°C - 20°C). Lower temperatures will extend the curing time.
- Suitable For Use On
- Concrete
- Suitable For Use On
- Tarmac
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Sand and Cement
- Application Method
- Trowel
- Product Usage Type
- Repair
- Product Range
- Watco Specialist
- Product Range
- Bitu-Mend
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Bitu-Mend Advanced is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT