- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
An extra-thick epoxy resin floor coating for very heavy trafficked floor areas in warehouses, garages, production areas and showrooms, receptions, oil and chemical areas, with options for high-build, anti-slip, cold-cure, and rapid-drying from the drop-down menu below.
- Heavy duty protection for floors
- Thick, glossy, and strong
- Excellent chemical resistance
- One coat high build application
- Versions available:
- Epoxicote High Build
- Epoxicote High Build Rapid - The ultimate rapid setting high build epoxy resin floor coating for interior concrete
- Epoxicote High Build Anti Slip - A thick 'high build' anti slip coating for exceptional wear protection. For heavy traffic areas
- Epoxicote High Build Anti Slip Rapid - A fast drying thick 'high build' paint for heavy traffic areas. Cures in 8 hours
- Epoxicote High Build Cold Cure - Cures as low as 5°C in cold, unheated buildings
- Epoxicote High Build Cold Cure Anti Slip - Our thick 'high build' anti slip coating for heavy traffic areas - with cold curing ability
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Description
A highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The ‘rapid’ versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the ‘anti-slip’ versions provide a good level of slip resistance where needed. The anti-slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish.
Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.
All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch, and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application
- Drying Times
- Test Results
- Standard Compliance
- Limitations
Features & Benefits
- Areas of use include:
- Very heavily trafficked floors
- Production areas
- Showrooms
- Warehouses
- Garages
- Receptions
- Oil & chemical areas
- One coat, high build epoxy resin coating – gives excellent wear and abrasion resistance with just one coat
- Glossy, attractive, easily cleaned finish
- Excellent resistance to oil and chemicals
- Low odour – safe to use in confined spaces
- Cures within 8 hours to withstand light traffic (see ‘Rapid’ versions)
- Superior performance demonstrated by ISO testing to CE Mark EN1504-2
Surface Preparation
Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.
New Concrete – as a guide, new concrete should be left for eight weeks to dry (if the application has to go ahead before this, use Watco New Concrete Primer). The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.
Painted surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete, (do not use on a previously painted surface since it can soften paint).
Priming – Watco Epoxicote High Build Primer is recommended for bare concrete surfaces. It prevents air bubbles forming in Epoxicote High Build when painting open textured or porous concrete. Using this primer also promotes good adhesion when painting hard, smooth or power floated concrete.
Metal – remove any rust and flaking material by disc grinding or wire brushing. Apply the coating immediately after preparation to the clean metal surface. Grease or oil can be removed using Watco Bio D. Allow the metal to dry before coating.
Galvanised Metal – Watco Galvaprime must be used to prepare galvanised metal.
Non-ferrous Metals - for advice, please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected].
Mixing
Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin, (scrape around the inside of the tins to remove any residue).
Mix the components together thoroughly using a spatula or similar wide bladed tool, (a piece of wooden batten is ideal) and do not thin. Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time.
If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin.
In the anti-slip version the slip resistant particles are already pre-blended (in the Curing Agent).
Application
Important - once the contents of the pack have been mixed, a chemical reaction takes place which creates heat. The product should therefore be decanted into a shallow tray to avoid reducing the pot life and used straight away.
Best results are obtained in warm (minimum of 15°C), dry conditions with good ventilation.
Apply one coat with a medium pile roller, (not foam), working well into the surface of the concrete.
On vertical surfaces 2 thin coats are recommended.
Do not exceed the maximum coverage of 18m2 per 4 litre pack.
Do not wash or allow water to lie on the surface for at least 7 days.
Drying Times
| Temperature | Recoat Time | Touch Dry | Light Traffic | Full Use | |
|---|---|---|---|---|---|
| Epoxicote High Build & Anti Slip | 10°C | 16 hours | 12 hours | 24 hours | 48 hours |
| 20°C | 10 hours | 6 hours | 16 hours | 48 hours | |
| 30°C | 6 hours | 4 hours | 8 hours | 16 hours | |
| Epoxicote Cold Cure | 5°C | 24 hours | 16 hours | 30 hours | 72 hours |
| 10°C | 16 hours | 12 hours | 24 hours | 48 hours | |
| 20°C | 12 hours | 6 hours | 16 hours | 48 hours | |
| 30°C | 6 hours | 4 hours | 8 hours | 16 hours | |
| Epoxicote Rapid | 10°C | 12 hours | 8 hours | 16 hours | 48 hours |
| 20°C | 6 hours | 4 hours | 8 hours | 16 hours | |
| 30°C | 4 hours | 3 hours | 6 hours | 16 hours |
Test Results
- Abrasion Resistance ISO 5470-1 - 166mg (High Build/Cold Cure/Rapid)
- Impact Resistance ISO 6272 - Class 2
- Scratch Resistance ISO 4586-2 - 7N
- Adhesion Test ISO 2409 - Class 1
- Adhesion Test EN 1542 - 4.5MPa/Nmm2
- Wolff-Wilborn Hardness Test - 9H
- Flexibility ISO 1519 - 2mm
- Gloss Value - 98
- Slip Resistance BS7976-2 - 66PTV
- Excellent chemical resistance - avoid permanent immersion
- Petrol
- 25% Lactic Acid
- Diesel Fuel
- 10% Hydrochloric Acid
- Xylene
- 10% Nitric Acid
- Salt
- 25% Sulphuric Acid
- White Spirit
- 20% Phosphoric Acid
- Bleach
- 10% Citric Acid
- 20% Ammonia
- 20% Caustic Soda
- Anti-Freeze
- Sugar Solutions
- Mineral Oil
- 10% Oxalic Acid
- Detergents
- 5% Acetic Acid
- Methylated Spirits
- Water Permeability EN 1062-3 - W3
Standard Compliance
- EN 1504-2
- BREEAM COMPLIANT
- VOC LEVEL 35g/litre (very low)
- ISO 16000
- REACH COMPLIANT
Limitations
Most self-levelling compounds cannot be painted - contact our technical team for details on 0113 2455450 (option 2) or send a message to [email protected].
Unsuitable for asphalt.
Painting chequer plate can be a problem since coatings can wear prematurely off the ‘high spots’.
Do not apply to damp surfaces
Product Details
9156-991881
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Concrete
- For Use On
- Metallic Substrates
- Application Method
- Medium pile roller
Cut in using a brush - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4L
- Minimum Applied Thickness
- 220 microns
- Mixing Ratio
- 100 parts resin : 24 parts curing agent
- Pot Life (at 20°C)
- 25 mins at 20°C (‘Rapid’ versions 20 mins at 20°C)
- Coverage
- 18m2
- Min. Application Temperature
- Air temperature 15°c, floor temperature 10°c
- Min. Application Temperature
- Air temperature 15°C
Floor temperature 10°C - Touch Dry
- High Build & Anti Slip:
12 hours at 10°C
6 hours at 20°C
4 hours at 30°C - Touch Dry
- Cold Cure:
16 hours at 5°C
12 hours at 10°C
6 hours at 20°C
4 hours at 30°C - Touch Dry
- Rapid:
8 hours at 10°C
4 hours at 20°C
3 hours at 30°C - Recommended Dry Film Thickness
- 220 microns
- Recommended Wet Film Thickness
- 220 microns
- UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3082
- Resistance to chemicals
- Ammonia
- Resistance to chemicals
- Detergent
- Resistance to chemicals
- Phosphoric Acid
- Resistance to chemicals
- Petrol
- Resistance to chemicals
- Citric Acid
- Resistance to chemicals
- Oil
- Resistance to chemicals
- Caustic Soda
- Resistance to chemicals
- Diesel
- Resistance to chemicals
- Methylated Spirit
- Resistance to chemicals
- White Spirit
- Resistance to chemicals
- Xylene
- Resistance to chemicals
- Oxalic Acid
- Resistance to chemicals
- Acetic Acid
- Resistance to chemicals
- Lactic acid
- Resistance to chemicals
- Hydrochloric acid
- Resistance to chemicals
- Nitric Acid
- Resistance to chemicals
- Sulphuric Acid
- Resistance to chemicals
- Sugar Solution
- Resistance to chemicals
- Anti-Freeze
- Resistance to chemicals
- Bleach
- Dry to Recoat
- High Build & Anti Slip:
16 hours at 10°C
10 hours at 20°C
6 hours at 30°C - Dry to Recoat
- Cold Cure:
24 hours at 5°C
16 hours at 10°C
10 hours at 20°C
6 hours at 30°C - Dry to Recoat
- Rapid:
12 hours at 10°C
6 hours at 20°C
4 hours at 30°C - Suitable For Use On
- Garages
- Suitable For Use On
- Oily Floors
- Suitable For Use On
- Workshop Floors
- Suitable For Use On
- Metal
- Suitable For Use On
- New Concrete Floors
- Suitable For Use On
- Concrete
- Suitable For Use On
- Car Showrooms
- Suitable For Use On
- Floors
- Suitable For Use On
- Showrooms
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Receptions
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Non-Ferrous Metals
- Suitable For Use On
- Reception Floors
- Suitable For Use On
- Garage Floors
- Suitable For Use On
- Chemical Floors
- Suitable For Use On
- Sand and Cement
- Suitable For Use On
- Bare Concrete
- Suitable For Use On
- Warehouse Floors
- Suitable For Use On
- Bare Concrete Floors
- Suitable For Use On
- Factory Floors
- Suitable For Use On
- New Concrete
- Suitable For Use On
- Workshop Floor
- Suitable For Use On
- Galvanised Metal
- Suitable For Use On
- Production Areas
- Suitable For Use On
- Metal Floors
- Suitable For Use On
- Showroom Floors
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 2K
- Product Usage Type
- Floor Coating
- Product Range
- Epoxicote
- Dry for Light Traffic
- High Build & Anti Slip:
24 hours at 10°C
16 hours at 20°C
8 hours at 30°C - Dry for Light Traffic
- Cold Cure:
30 hours at 5°C
24 hours at 10°C
16 hours at 20°C
8 hours at 30°C - Dry for Light Traffic
- Rapid:
16 hours at 10°C
8 hours at 20°C
6 hours at 30°C - Dry for Heavy Traffic
- High Build & Anti Slip:
48 hours at 10°C
48 hours at 20°C
16 hours at 30°C - Dry for Heavy Traffic
- Cold Cure:
72 hours at 5°C
48 hours at 10°C
48 hours at 20°C
16 hours at 30°C - Dry for Heavy Traffic
- Rapid:
48 hours at 10°C
16 hours at 20°C
16 hours at 30°C - Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Yellow
- Colour Family
- Black
- Categorised As
- Floor Paints > Low Temperature Anti-Slip Floor Paints
- Seasonal
- Cold Weather
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Epoxicote High Build Concrete Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Watco Bio-D Floor Cleaner
A heavy-duty biodegradable cleaner for floor preparation, removes grease and oil from painted or bare concrete. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most painted surfaces More Information Delivery Info
Price
£30.96
(incl. VAT)
In Stock and Available for Delivery
Watco Epoxicote High Build Primer
Epoxy resin primer for preparing bare concrete for painting, overcoating with Epoxicote High Build. Primes hard, smooth concrete ready for painting One coat application – quick and easy to apply Low odour, two-part, water-based epoxy resin Seals porous concrete to prevent bubbling in new paint Note: While great care is taken with...
Price
£109.50
(incl. VAT)
In Stock and Available for Delivery
Watco Etch & Clean Concrete Surface Preparation
Dual action formula cleans and prepares bare concrete prior to painting. Use on old and new concrete, inside or outside Etches bare concrete to promote adhesion of paint finishes Removes dirt and light oil deposits Removes cement deposits from new concrete to ensure good paint adhesion Reduces alkalinity of new concrete – essential...
Price
£46.80
(incl. VAT)
In Stock and Available for Delivery
Watco New Concrete Primer
Primes and seals newly laid concrete for early painting. Suitable for areas subject to heavy traffic. Withstands 98% relative humidity Saves waiting for new concrete to dry out Can be applied to damp surfaces Overcoat in just 16 hours Can be used with underfloor heating systems Note: While great care is taken with the colour...
Price
£208.02
(incl. VAT)
In Stock and Available for Delivery
Watco Concroff Oil & Grease Remover
Lift grease and oil from bare concrete with this powerful, water-based degreaser. For preparation of heavily contaminated greasy floors prior to painting, inside or outside. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most...
Price
£40.68
(incl. VAT)
In Stock and Available for Delivery
Watco Galvaprime
Primes and prepares galvanised surfaces for painting. Overcoat the same day Essential for good adhesion Quick and easy to use Apply by brush Coverage Calculator More Information Delivery Info
Price
£39.00
(incl. VAT)
In Stock and Available for Delivery