- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A two-part epoxy with pre-blended aggregate for an even, easy clean, fine anti slip finish for floors - concrete, sand and cement, wood, and existing, well-bonded paint.
- Available in 190 RAL shades
- Watco's strongest water-based epoxy coating
- Pre-blended aggregate for an even finish
- Fast curing – apply two coats in one day
- Easy clean, finely textured
- Options include:
- Watco Safety Coat Coarse - For extra slip protection in hazard areas with a tough course hard wearing finish
- Coarse version for high hazard areas
- Extremely low slip potential (WP 59)
- Watco Safety Coat Hygienic - Heavy duty non-slip coating for areas where hygiene is important
- Reinforced with diamond hard wax and ceramics
- Watco Safety Coat Coarse - For extra slip protection in hazard areas with a tough course hard wearing finish
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Product customisation
Don't forget to save your customization to be able to add to cartWatco Safety Coat has been re-formulated to produce a ‘Best in Class’ water based, anti-slip epoxy resin.
This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available with a ‘diamond hard’ wax and ceramic additive provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts.
Hygienic grades incorporate Silver Ion technology and are ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish.
All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch, and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas and have a Class 1 fire rating. The range carries an A+ VOC emissions rating with a low level of VOC.
All tests have been undertaken to ISO standard where applicable and demonstrated this ‘Best Ever Formulation’ to be 40% harder wearing than previously.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application
- Test Results
- Standard Compliance
- Limitations
Features & Benefits
- Areas of use include:
- Warehouse
- Production Areas
- Workshops
- Showrooms
- Potentially slippery, heavy wear areas
- Tough, hard wearing floor finish for heavy wear areas
- Pre-blended aggregate provides an evenly textured finish
- Apply to bare or previously painted surfaces
- Easy roller, low odour application
- Apply 2 coats in one day to reduce downtime
- New colour formulations to RAL shades
- Class 1 fire rating
- Tested safe for use in food production areas
- Superior performance demonstrated by ISO testing to CE mark EN1504-2
Surface Preparation
Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Remove Etch & Clean by thoroughly rinsing with clean water and allow surface to dry. If residual damp remains this is acceptable since Safety Coat is breathable.
Powerfloated or very smooth surfaces – Watco Powerfloat Primer should be used on very smooth or power floated surfaces.
New Concrete – new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.
Painted surfaces – abrade to remove loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio-D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete (Concroff can soften paint.)
Highly porous surfaces – a primer may be required for high suction surfaces such as sand and cement screed. Please contact us for advice.
Mixing
Remove the two inner tins from the tall outer tin. Stir the contents of each tin thoroughly and pour all of the contents into the outer tin (scrape around the inside of the tins to remove any residue).
Mix the components together thoroughly using a spatula or similar wide bladed tool (a piece of wooden batten is ideal). Continue mixing until an even colour and consistency are obtained. Do not mix more than one pack at a time. If a paint stirrer fitted to an electric drill is used, also use the spatula to blend in any unmixed material from the sides and bottom of the tin.
Application
Best results are obtained in warm (minimum 15ºC), dry conditions with good ventilation. In very high temperatures (30ºC and above) it is recommended that bare concrete is lightly dampened first with water.
Apply with a medium pile roller, working well into the surface of the concrete. Occasional stirring will ensure a more even distribution of the aggregate.
Do not exceed the maximum coverage of 30m2 per 5 litre pack, per coat. The product will darken slightly as curing commences and it should not be over rollered.
The second coat can be applied as soon as the first coat is dry (generally 4-6 hours) and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for seven days.
Test Results
- Abrasion Resistance ISO 5470-1 - 57mg
- Impact Resistance ISO 6272 - Class 3
- Scratch Resistance ISO 4586-2 - 7N
- Surface Spread of Flame BS476 Part 7 - Class 1
- Adhesion Test EN 1542 - 4.1MPa/Nmm2
- Wolff-Wilborn Hardness Test - 9H
- Flexibility ISO 1519 - 2mm
- Gloss Value - 98
- Chemical Resistance - Good:
- Petrol, diesel, fuel, methylated spirits
- Xylene, ammonia, white spirit, bleach
- Oil, anti-freeze, mineral hydraulic oil
- Caustic soda, detergents, sugar solutions
- At 5%: citric acid
- Food Taint Test, Sensory Test Method (Also EN71/3 Non-Toxic)
- Water Permeability EN 1062-3 - W3
- Slip Resistance BS7976-2 - 55 PTV (59 PTV Coarse)
Standard Compliance
- EN 1504-2
- BREEAM COMPLIANT
- VOC LEVEL 30g/litre (very low)
- ISO 16000
- REACH COMPLIANT
Limitations
Unsuitable for bare metal.
Most self-levelling compounds cannot be painted - contact our technical team for details on 0113 2455450 (option 2) or send a message to [email protected].
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- For Use On
- Concrete
- Application Method
- Medium pile roller
Cut in using a brush - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Minimum Applied Thickness
- 100 microns
- Mixing Ratio
- 100 parts curing agent : 132 parts resin.
- Pot Life (at 20°C)
- Up to 2 hours at 20°C
- Coverage
- 30m2
- Recommended Thinner/Cleaner
- Warm soapy water
- Min. Application Temperature
- Air temperature 15°C
Floor temperature 10°C - Touch Dry
- 4 hours at 10°C
2 hours at 20°C
1 hour at 30°C - Recommended Dry Film Thickness
- 100 microns
- Recommended Wet Film Thickness
- 160 microns
- Resistance to chemicals
- resistant
- Dry to Recoat
- 6-8 hours at 10°C
4-6 hours at 20°C
4 hours at 30°C - Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Sand
- Suitable For Use On
- Workshops
- Suitable For Use On
- Aviation Areas
- Suitable For Use On
- Concrete
- Suitable For Use On
- Workshop Floors
- Suitable For Use On
- Wood
- Suitable For Use On
- Food Preparation Areas
- Suitable For Use On
- Floors
- Suitable For Use On
- Car Showrooms
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Showrooms
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Bare Concrete
- Suitable For Use On
- Cement
- Suitable For Use On
- Sand and Cement
- Suitable For Use On
- New Concrete
- Suitable For Use On
- Warehouse Floors
- Suitable For Use On
- Powerfloated Surfaces
- Suitable For Use On
- Factory Floors
- Suitable For Use On
- Food Production Areas
- Suitable For Use On
- Production Areas
- Suitable For Use On
- Powerfloated Floors
- Suitable For Use On
- Showroom Floors
- Suitable For Use On
- Wood Floors
- Suitable For Use On
- Warehouses
- Suitable For Use On
- Garages
- Finish
- Textured Gloss
- Application Method
- Roller
- Components
- 2K
- Usages
- Hygienic Finish
- Product Usage Type
- Floor Coating
- Product Range
- Safety Coat
- Dry for Light Traffic
- 16 hours at 10°C
12 hours at 20°C
12 hours at 30°C - Dry for Heavy Traffic
- 48 hours at 10°C
24 hours at 20°C
24 hours at 30°C - Full Chemical Resistance
- 7 days
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Fire Rating
- Class 1 fire rating
- Anti-Slip Texture
- Coarse Texture
- Anti-Slip Texture
- Fine Texture
- Product Type
- Epoxy
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Safety Coat Anti-Slip Floor Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Watco Bio-D Floor Cleaner
A heavy-duty biodegradable cleaner for floor preparation, removes grease and oil from painted or bare concrete. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most painted surfaces More Information Delivery Info
Watco Etch & Clean Concrete Surface Preparation
Dual action formula cleans and prepares bare concrete prior to painting. Use on old and new concrete, inside or outside Etches bare concrete to promote adhesion of paint finishes Removes dirt and light oil deposits Removes cement deposits from new concrete to ensure good paint adhesion Reduces alkalinity of new concrete – essential...
Watco Powerfloat Primer
An epoxy resin primer that allows smooth concrete to be painted without mechanical preparation. For priming power floated, very smooth or non-porous concrete floors which are prone to rejecting paint. Ready for overcoating in 12 hours Rapid version available, ready for overcoating in 4-6 hours Unique formula prevents paint peeling...
Watco Concroff Oil & Grease Remover
Lift grease and oil from bare concrete with this powerful, water-based degreaser. For preparation of heavily contaminated greasy floors prior to painting, inside or outside. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most...