- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A heavy duty epoxy resin repair system for ultra-strong repairs to damaged concrete and asphalt.
- Repair trip hazards and potholes, gangways and work areas
- Car parks and loading bays, bed in and fix roller shutter door guide rails, etc
- Takes heavy traffic
- Ideal for shallow repairs asphalt and tarmac
- Strong enough to hold guide posts and rails
- High strength epoxy resin formulation
- Suitable for use inside and out
- Cures to a hard, black, slip resistant finish
- No primer required
- Can be applied at any thickness from 10mm-100mm
- Ready for use in 12 hours
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Watco Concrex Asphalt Repair is a new type of product for filling holes in asphalt and concrete floors. The epoxy resin formulation is much stronger and longer lasting than traditional bitumen based products. Its strength allows for thinner repairs than conventional products and it is ideal for heavily trafficked areas.
Watco Concrex Asphalt Repair has good general resistance to many chemicals commonly found in industry. For advice regarding other chemicals, contact our technical team on 0113 2455450 (option 2) or send a message to [email protected].
Quick Links - Click To Jump To Section:
Features & Benefits
- Areas of use include:
- Repair trip hazards and potholes
- Gangways and work areas
- Car parks and loading bays
- Bed in and fix roller shutter door guide rails etc
- Suitable for use inside and out
- Cures to a hard, black, slip resistant finish
- No primer required
- Can be applied at any thickness from 10mm-100mm
- Ready for use in 12 hours
Surface Preparation
Ensure the void to be filled is clean, dry (slight damp is acceptable) and sound.
Mixing
Mixing is easier on a board, but it can be done in the plastic container provided.
Empty the contents of the smaller Curing Agent tin into the larger Resin tin and mix thoroughly using a palette knife or similar wide bladed tool.
Immediately empty the mixed components onto the granite aggregate.
Mix using a trowel to achieve a loose textured black compound.
Ensure that the dry aggregate is thoroughly coated.
Application
Tip the mixed product into the void and work into any gaps and crevices with a trowel.
Lightly tamp down with a piece of wood, compacting the product to remove air pockets.
Finish with a trowel wiped with white spirit for a smooth finish.
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
- For Use On
- Asphalt surfaces
- Application Method
- Steel float or trowel
- Single, Two or Three Pack
- Three-Pack
- Pack Size
- 25KG
- Coverage
- Approximately 0.5m² per 25kg at 30mm thick.
- Recommended Thinner/Cleaner
- Equipment used for mixing and applying should be wiped clean with white spirit or a similar solvent before the Concrex Acid Strength cures.
- Compatible Primers
- A primer is not required when the product is used to fill rough holes or cracks. Recommended to use Watco Tack Coat primer if using over smooth substrates.
- UN Number
- UN2735
- Layer Thickness
- 10mm -100mm
- Pot Life
- Approximately 30 minutes at 10°C - 20°C, less in higher temperatures.
- Fully Cured
- Can be walked on after 8 -12 hours and subject to heavy traffic after 12 - 24 hours (all at 10°C - 20°C). Lower temperatures will extend the curing time.
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Sand and Cement
- Application Method
- Trowel
- Product Usage Type
- Repair
- Product Range
- Concrex
- Colour Family
- Black
Questions
Question about the product
Nigel on 2024-07-08 12:20:01 | Question:
Can this product be used to fill expansion joints in a concrete floor (30mm joints) is there enough movement in the product. |
Answer from Rawlins’ Technical Team:
Although this product could be used in this scenario, and provide a slight amount of flexibility (although no movement in the floor), we wouldn't recommend to use in this type of application. Assuming the concrete is clean, dry, sound and prepared as detailed in the technical datasheet, an alternative you could consider is Watco Flexible Joint Repair. This product will provide more flexibility to cope with movement. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Concrex Asphalt Repair is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT