- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Easy to use pre-mixed, single-pack, polyurethane anti-slip coating for light traffic areas in warehouses, garages, and other concrete floors.
- Superior impact, hardness and adhesion
- Tested to CE Mark EN1504-2
- ‘Best Ever Formula’ twice as durable as before
- Transforms and dustproofs drab, stained concrete
- Ideal for identifying production and storage areas and traffic aisles
- Easy to keep clean
- Also available in Matt and Gloss versions
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Product customisation
Don't forget to save your customization to be able to add to cartA unique formula based on a blend of ceramic, ‘diamond hard’ wax and polyurethane resin, has produced a ‘Best in Class’ single pack paint for general use.
All grades now carry CE Mark EN 1504-2 and have impressive test results for abrasion, scratch-and-impact resistance, as well as for adhesion, hardness and flexibility.
All tests have been undertaken to ISO standard where applicable and demonstrated this ‘Best Ever Formulation’ to be four times more scratch resistant than previously, twice as hard wearing and with 50% improved adhesion.
This attractive, hardwearing coating is easy to apply and dries quickly to provide a low maintenance, tough, oil resistant finish.
Other versions available:
Matt Concrete Floor Paint helps to disguise imperfections in older floors and reduce reflection or glare. It’s still easy to keep clean and has all the benefits of the high gloss finish.
Watco Concrete Floor Paint Anti Slip provides a good level of slip resistance and the anti-slip particles are pre-blended which makes it easier to achieve a uniform finish.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Test Results
- Application
- Standard Compliance
- Limitations
Features & Benefits
- Areas of use includes production areas, warehouses, and workshops
- Professional quality, single pack polyurethane coating
- Transforms and dustproofs drab, stained concrete
- Ideal for identifying production and storage areas and traffic aisles
- Easy to use and easy to keep clean
- Superior performance demonstrated by ISO testing to CE mark EN 1504-2
- High Gloss, Matt & Anti Slip versions available
- New formulations to 9 RAL colour shades
- Chemical resistant - resists short term spillages of oils, grease, diesel, and White Spirit
Surface Preparation
Bare Concrete – remove surface laitance, dust and any light dirt or grease deposits using Watco Etch & Clean. Watco Etch & Clean also etches smooth, bare concrete surfaces to provide a key. Flush with clean water and allow the surface to dry. For the removal of heavier deposits of oil and grease we recommend Watco Concroff, again, flush with clean water and allow the surface to dry.
New Concrete – as a guide, new concrete should be left for four weeks to dry in the summer and six in the winter. The surface should then be prepared using Watco Etch & Clean and thoroughly rinsed away and left to dry prior to applying this coating.
Priming – is not usually required, but for very porous high suction surfaces, such as sand and cement screed, use Watco 4 Hour Epoxy Primer. Concrete should be sufficiently porous to allow the paint to penetrate, so very smooth or power floated concrete is unsuitable unless first primed with Watco Powerfloat Primer.
Painted Surfaces – abrade to remove any weak or loose paint. Check remaining paint is well bonded. Very smooth, glossy paint should be lightly abraded to provide a key. Watco Bio-D can be used to remove grease and oil from painted surfaces. Watco Concroff is a very powerful degreaser for contaminated bare concrete, (do not use on a previously painted surface since it can soften paint).
Test Results
- Abrasion Resistance ISO 5470-1 - 361mg
- Impact Resistance ISO 6272 - CLASS 2
- Scratch Resistance ISO 4586-2 - 7N
- Adhesion Test ISO 2409 - CLASS 1
- Adhesion Test EN 1542 - 3.25MPa/Nmm2
- Wolff-Wilborn Hardness Test - 9H
- Flexibility ISO 1519 - 2mm
- Gloss Value - High Gloss 92, Matt 4
- Water Permeability EN 1062-3 - W3
- Slip Resistance BS7976-2
- 28 PTV (Gloss)
- 45 PTV (Matt)
- 60 PTV (Anti Slip)
Application
The paint should be thoroughly stirred and must not be thinned. Apply by roller and work well into the surface. Use a paint brush for edges. Avoid applying the paint too thickly. The second coat can be applied as soon as the first coat is dry (generally 16 hours) and should be applied within 5 days. If more than 5 days elapse, the first coat should be lightly abraded before the second coat is applied. Avoid washing the surface for 7 days.
Standard Compliance
- EN 1504-2
- BREEAM Compliant
- High VOC level (450g/litre)
- ISO 16000
- REACH Compliant
Limitations
This coating is not recommended for areas where cars may stand for long periods.
In common with single pack paints of this type, a reaction can take place between the car tyres and the paint, leading to delamination – in such cases we recommend a two-pack epoxy system such as Watco Epoxy Gloss Coat.
It is also unsuitable for most self-levelling compounds (please ask for details) and areas subject to rising damp.
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- For Use On
- Wood
- For Use On
- Concrete
- For Use On
- Metallic Substrates
- Application Method
- Medium pile roller
Cut in using a brush - Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Minimum Applied Thickness
- 80 microns DFT
- Minimum Applied Thickness
- 120 microns DFT
- Coverage
- 40m2 per coat.
- Recommended Thinner/Cleaner
- Mild, neutral detergent - Watco Protect is ideal. Do not steam clean.
- Min. Application Temperature
- Air temperature 15°C
Floor temperature 10°C - Touch Dry
- 10°C: 16 hours
20°C: 10 hours
30°C: 6 hours - Recommended Dry Film Thickness
- 80 microns
- Recommended Wet Film Thickness
- 120 microns
- UN Number
- UN1263
- Resistance to chemicals
- Resists short term spillages of oils, grease, diesel and White Spirit.
- Dry to Recoat
- 10°C: 24 hours
20°C: 16 hours
30°C: 16 hours - Fully Cured
- 10°C: 72 hours
20°C: 36 hours
30°C: 36 hours - Base Type
- Solvent-Based
- Suitable For Use On
- Stained Concrete Floors
- Suitable For Use On
- Factory Floors
- Suitable For Use On
- Workshop Floor
- Suitable For Use On
- Production Areas
- Suitable For Use On
- Metal Floors
- Suitable For Use On
- Wood Floors
- Suitable For Use On
- Warehouses
- Suitable For Use On
- Garages
- Suitable For Use On
- Workshops
- Suitable For Use On
- Workshop Floors
- Suitable For Use On
- Metal
- Suitable For Use On
- Drab Concrete Floors
- Suitable For Use On
- Concrete
- Suitable For Use On
- Bare Concrete
- Suitable For Use On
- Wood
- Suitable For Use On
- New Concrete
- Suitable For Use On
- Floors
- Suitable For Use On
- Stained Concrete
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Storage Areas
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Traffic Aisles
- Suitable For Use On
- Garage Floors
- Suitable For Use On
- Drab Concrete
- Suitable For Use On
- Warehouse Floors
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 1K
- Dry for Light Traffic
- 10°C: 48 hours
20°C: 24 hours
30°C: 24 hours - Colour Family
- Grey
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Yellow
- Product Type
- Polyurethane
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Anti Slip Concrete Floor Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT