- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A 2K waterborne, acrylic topcoat, suitable for use on primed or painted surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Fast Curing version available here.
- Excellent gloss and colour retention and excellent hardness
- Can be used over Selemix 2-pack solventborne or waterborne primers
- Recommended for high quality finishes in industrial agricultural equipment and machinery
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- For Professional Use Only
- Please Note: Gloss levels are within +/- 10% depending on colour
Please Note: This listing refers to 8-110 and 8-111 when used as Topcoat. To use this product as a Direct to Metal Finish please see Selemix 8-110/8-111 2K WB Acrylic Single Stage DTM Finish
Product customisation
Don't forget to save your customization to be able to add to cartSelemix 8-110/8-111 2K WB Acrylic Topcoat is a 2K waterborne, acrylic topcoat, suitable for use on primed or painted surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111) - please choose from the drop down menu above. Fast Curing version available here.
It provides excellent gloss and colour retention and excellent hardness and can be used over Selemix 2-pack solventborne, or waterborne primers.
It is especially recommended for high quality finishes in industrial agricultural equipment and machinery.
This listing refers to 8-110 and 8-111 when used as Topcoat. To use this product as a Direct to Metal Finish please see Selemix 8-110/8-111 2K WB Acrylic Single Stage DTM Finish.
Please note: Other gloss levels are achievable when 8-110 and 8-111 Binders are combined - please contact our Technical Department before placing an order on 0113 2455450 (option 2) or send a message to [email protected] for details.
For Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- 2K waterborne, acrylic topcoat
- Suitable for use on primed or painted surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use
- Available in High Gloss (8-110) and Matt (8-111).
- Excellent gloss and colour retention and excellent hardness
- Can be used over Selemix 2-pack solventborne or waterborne primers
- Recommended for high quality finishes in industrial agricultural equipment and machinery
- Available in over 6,700+ RAL, RAL Metallic*, BS, NCS and Selemix TIC colours
- *Note: RAL Pearl colours shown are approximations only - matches will not be exact
- For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Any Selemix Solventborne or Waterborne 2K Primer:
- Wet on Wet or Machine sand with P240-320 discs and degrease
Painted Surfaces:
- Machine sand with P240-320 discs and degrease
Mixing
- Thoroughly mix paint before activating and check colour before use
Features | Conventional Spray | Air Assisted Airless |
---|---|---|
By Weight: 8-110/8-111 Topcoat 9-110 Hardener Water |
By Weight: 1000 300 Thoroughly mix topcoat for 5 minutes and then add: 180 - 250 Water |
By Weight: 1000 300 Thoroughly mix topcoat for 5 minutes and then add: 180 - 250 Water |
By Volume: 8-110/8-111 Topcoat 9-110 Hardener Water |
By Volume: 3 1 Thoroughly mix topcoat for 5 minutes and then add: 0.5-0.75 (18-25%) Water |
By Volume: 3 1 Thoroughly mix topcoat for 5 minutes and then add: 0.5-0.75 (18-25%) Water |
Viscosity (at 20°C): | 20-25 secs DIN4 | 20-25 secs DIN4 |
Pot Life (at 20°C): | 3 hours | 3 hours |
Application Notes
Features | Conventional Spray | Air-Assisted Airless |
---|---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.4-1.6mm Suction: 1.6-1.8mm Pressure feed: 0.8-1mm |
Nozzle: 9 thou 0.23mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2-3 Bar |
2.5-3.5 Bar |
Fluid Pressure: | N/A | 90-110 Bar |
Number of coats: | 1 Light closed + 1 medium | 1 Light Dry + 1 Full |
Flash-off between coats: | 15-20 mins minimum at 20°C | 2 mins minimum at 20°C |
Drying: |
60°C for 45 mins Or 80°C for 20-25 mins |
60°C for 45 mins Or 80°C for 20-25 mins |
Flash-off before bake: | 45 mins minimum at 20°C | 45 mins minimum at 20°C |
Wet Film Thickness: | 100-125 microns | 100-125 microns |
Dry Film Thickness: | 40-50 microns | 40-50 microns |
Brush and Roller:
8-110/8-111 Acrylic Topcoat can be applied by brush (solvent resistant) or roller short haired mohair roller:
- Activate 3:1 with 9-110 Hardener
- Thinning with 10% of water is recommended
- Apply in 2 coats with minimum 45 minutes flash-off between coats
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 7 - 10 m² per litre at 50 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 20-25 mins |
Touch Free | 5-6 hours |
Handleable | 8-9 hours |
Hard Dry | 24-36 hours |
Stoving | 45-60 minutes @60°C (according to film thickness) |
Overcoating time |
Minimum: 8 hours Maximum: 24 hours without sanding on clean surface with itself |
Please Note: Lower temperature or film thickness higher than 50µm will extend drying times. The drying times quoted are approximate times and will vary depending on drying conditions and film thickness. Poor ventilation, temperature below 20°C, humidity above 85% RH and excessive film thickness will extend the drying times. |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Water Based
- For Use On
- Painted Surfaces
Primed Surfaces - Sheen
- High-Gloss
Matt - Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 3:1
- Application
- Spray
Brush
Roller - Touch Dry (at 20°C)
- 6 hours
- Pot Life (at 20°C)
- 3 hours
- UN Number (Base)
- N/A
- Hard Dry
- 24 Hours
- Dust Dry (at 20°C)
- 20-25 mins
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Matt
- Finish
- High Gloss
- Substrate
- Steel
- Substrate
- Galvanised Steel
- Substrate
- Aluminium
- Substrate
- Painted / Primed Metal
- Substrate
- Light Alloys
- Substrate
- Phosphated Steel
- Usages
- High Chemical Resistance
- Usages
- High UV Resistance
- Usages
- Low VOC
- Usages
- Chemical Resistance
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Usages
- Weather Resistance
- Usages
- Force Dry Compatible
- Product Usage Type
- Topcoat
- Technologies
- Waterborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Airmix
- Application Methods
- Electrostatic
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 6 hours
- Drying Properties
- Force Dry Compatible
- Product Attributes
- Tough / Durable
- Resistance to
- Chemicals
- Resistance to
- Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 8-110/8-111 2K WB Acrylic Topcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 8-110/8-111 2K WB Acrylic Topcoat (Fast Curing)
A fast-curing 2K waterborne, acrylic topcoat, suitable for use on primed or painted surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Standard Curing version available here. Excellent gloss and colour retention and excellent hardness Can be...
Selemix 8-110/8-111 2K WB Acrylic Single Stage DTM Finish
2K waterborne, acrylic coating, with 6,700+ colours for direct application to well-prepared steel, galvanized steel, phosphate steel, or aluminium surfaces exposed to weathering, mechanical and chemical stress, for both interior and exterior use. Available in High Gloss (8-110) and Matt (8-111). Fast Curing version available here. Excellent...