- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Mineral based consolidating treatment that does not alter the permeability of the substrate to gases or water vapor. Consolidates substrates with poor adhesion (sandy, dusty, etc.) and reduces absorption of highly absorbent substrates.
- Suitable for exposed mineral substrates such as rendering, plastering, concrete, calcareous sandstone, etc. Also for very absorbent substrates such as mud, clay, adobe, etc.
- High penetration that does not form impermeable layer
Price and availability on application - contact our sales team on 0113 2455450 or send a message to [email protected] for more information on ordering this product.
Quick Links - Click To Jump To Section:
Features & Benefits
- Consolidating primer - consolidates and protects mineral finishes such as plasters and sandstone
- Reduces substrate absorption
- Increases durability of the solution
- Mineral. Silicate-based
- Highly breathable - Supports air flow eliminating condensation
- Outstanding adherence, resistance and durability
- High penetration. Does not form impermeable layer
- Ecological and free of VOC emissions
- Suitable for use on interior and exterior surfaces
- Colourless finish treatment maintains the original appearance of the surface
Application
- Suitable for exposed mineral substrates such as rendering, plastering, concrete, calcareous sandstone, etc. Also for very absorbent substrates such as mud, clay, adobe, etc.
- The substrate must be dry, firm, well adhered, even and free of any impurities that could hinder the perfect bonding of the product
- Any organic growth and/or other impurities should be removed by thorough cleaning using specific products for this purpose
- If the substrate is not well adhered, remove the non-adherent areas by scraping and brushing
- Dilute 3:1 with water and shake until homogenous
- Apply with roller, brush or airless spray 1 or 2 coats depending on substrate absorption or desired protection. Do not saturate substrate with the product
- Clean tools after use with warm water
- Dries in 24 hours at 25°C and 60% relative humidity
Limitations
- Do not apply under direct sunlight, on surfaces heated by the sun or in anticipation of rain
- Mineral substrates must be at least 28 days old, cured and dry
- The surfaces to be painted must be resistant to high alkalinity
- Do not apply to surfaces with stagnant water or in permanent contact with water
- It is recommended to protect the treated surface from rain and atmospheric humidity for 4 days
- Should there be any strict aesthetic requirements, it is recommended to carry out preliminary tests. Product may cause slight darkening of the finish
- Parts that are not going to be treated should be protected (glassware or carpentry)
- To maintain product efficacy do not mix with other brands
Data sheet
- Manufacturer
- Graphenstone
- For Use By
- Consumer Use
- For Use On
- Exposed mineral substrates such as rendering, plastering, concrete, calcareous sandstone, etc. Also for very absorbent substrates such as mud, clay, adobe, etc.
- Application Method
- Brush, roller, airless spray
- Single, Two or Three Pack
- Single pack
- Pack Size
- 1L, 5L, 15L
- Coverage
- 13-16 m2 /L
- pH
- 11 ± 1
- Colour(s)
- Clear
- Base Type
- Water-Based
- Suitable For Use On
- Render
- Suitable For Use On
- Plaster
- Suitable For Use On
- Mineral Substrates
- Suitable For Use On
- Concrete
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Categorised As
- Masonry Cleaners
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Graphenstone Minerseal Premium is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT