Follow us on:

5KG Pack
15KG Pack
402 Damp Proof Coating
402 Damp Proof Coating
402 Damp Proof Coating

402 Damp Proof Coating

RAW402
RAW3342

2 pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes.

  • Also available in 4,000+ colour options from RAL, BS and NCS
  • Available in Smooth and Anti-Slip* options
  • Provides a surface damp-proof membrane
  • Allows rapid laying of floor toppings to power floated concrete
  • Solvent free, low odour
  • Low viscosity, easily applied
  • Excellent resistance to water, grease and oil
  • Can be used as a primer or finished floor coating
  • Images are for illustrative purposes only and may differ from the actual product
  • This product is for Professional Use Only

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
Option
£120.60(incl. VAT)
£100.50(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

402 Damp Proof Coating is a two pack epoxy resin based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes. One or two coats may be applied depending on the degree of dampness present in the subfloor.

402 Damp Proof Coating is also suitable for priming damp, minimally prepared substrates and as a high build coating in its own right.

For application in lower temperatures (5°C - 25°C) or when rapid overcoating/access is required a Winter Grade version of this product is available.

This product is for Professional Use Only.

Quick Links - Click To Jump To Section:




Features & Benefits


  • Two-pack
  • Allows the early installation of moisture sensitive flooring in fast track building programmes
  • Suitable for priming damp, minimally prepared substrates and as a high build coating in its own right
  • Provides a surface damp-proof membrane
  • Allows rapid laying of floor toppings to power floated concrete
  • Solvent free, low odour
  • Low viscosity, easily applied
  • Excellent adhesion
  • Surface tolerant
  • Excellent resistance to water, grease and oil
  • Can be used as a primer or finished floor coating
  • Recommended application temperature 10°C - 30°C



Typical Properties


Technical Data
  402 Damp Proof Coating
Pot life @ 20°C: 45 Minutes
Pot life @ 10ºC: 90 Minutes
Tack Free Time @20°C: 6 hours
Hard Dry Time @ 20°C: 14 hours
Adhesive strength to damp concrete: 3.6MPa (concrete failure)
Flexural Strength: 64 MPa
Water Absorption: <0.2% after 7 days immersion



Please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice.



Slip Resistance


Should a non-slip finish be required, 508 Fine Particle Anti-Slip Additive can be added to the coating during mixing prior to application to produce an even and easily cleanable texture to the dried surface.

Alternatively the 'Anti Slip' option can be selected when purchasing the product and the 250 micron grade of 508 Anti-Slip Additive will be added at 2.4% prior to receipt.

If a more aggressive anti-slip finish is required 504 Standard Anti-Slip Additive or 505 Large Anti-Slip Additive can be scattered onto the first coat of 402 Damp Proof Coating whilst still wet (Full broadcast at approximately 2kg/m² or a partial scatter at 0.5kg/m²). The following day any excess aggregate may be swept from the surface using a clean brush prior to application of the second coat to ‘sandwich’ the anti-slip additive.

NOTE: For our ultimate slip resistance see 502 HD Anti-Slip Coating.

Results based on adding 508 Fine Particle Anti-Slip Additive (250 Micron Grade) @ 2.4%.

  • 5kg unit - add 200g
  • 15kg unit - add 600g
  • Dry PTV: 49-51
  • Wet PTV: 40-43

PTV Ratings:

Slip potential classifications from Pendulum Test Values.



Slip Resistance Values
PTV Slip Potential
< 25 High
25 - 35 Moderate
> 35 Low



The above results must only be used as a general guideline as the slip resistance of a cured resin coating can vary considerably due to many factors including: application technique, variations in film thickness, dispersion of the anti-slip texturing additive and the surface variations of the substrate and location to where it will be applied.

To obtain accurate PTV readings that are site specific (if required) it is strongly recommended that a slip assessment pendulum test is undertaken on each specific site after completion of the installation when the resin has fully cured.

A full copy of the official test report is available upon request.



Coverage


  • 3m²/kg first coat
  • 4m²/kg second coat



Surface Preparation


  • Concrete surfaces shall be sound, clean and free from dust laitance and other contaminants
  • Suitable mechanical treatments such as vacuum grit blasting is recommended to ensure the removal of contaminants and to provide a ‘key’ for 402 Damp Proof Coating
  • Moisture testing of the substrate in accordance with BS8203, shall be carried out on new concrete floors
  • A sub floor moisture reading of 97% R.H. can be accommodated by 402 Damp Proof Coating
  • If readings exceed this figure, then the floor must be allowed to dry out further



Mixing:

  • Pour the contents of the curing agent tin into the base container and thoroughly mix, preferably by mechanical means until a uniform colour and consistency is achieved



Mixing Ratio (Clear):

  • By Volume - 1.65 Base : 1 Curing Agent
  • By Weight - 100 Base : 56.2 Curing Agent



Mixing Ratio (Colour):

  • By Volume - 2.02 Base : 1 Curing Agent
  • By Weight - 100 Base : 34.4 Curing Agent



Application


As A Damp Proof Membrane:

Two Coat Application (R.H>92%):

  • Apply a first coat of 402 Damp Proof Coating red, by brush, roller or airless spray to the prepared substrate at a nominal rate of 3m²/kg
  • Within 24 hours apply a coat of 402 Damp Proof Coating grey at a nominal rate of 4m²/kg

Single Coat Application (R.H<92%)

  • Apply a coat of 402 Damp Proof Coating (grey, red, or clear) at a nominal rate of 3m²/kg

As A Primer/Coating:

  • As a coating, apply 1 or 2 coats of 402 Damp Proof Coating at a nominal rate of 3m²/kg per coat
  • Allow 14 hours @ 20°C prior to applying the second coat
  • Apply by brush, roller or airless spray



Cleaning




Limitations


  • Do not apply to surfaces with standing water
  • Do not apply at temperatures of 3°C or less



Storage & Shelf Life


  • Store in dry conditions at temperatures between 10°C and 25°C
  • Do not expose to freezing conditions
  • 402 Damp Proof Coating has a minimum shelf life of 12 months when stored in original, unopened containers in accordance with manufacturer’s instructions



Health & Safety


  • Avoid contact of the material with skin and eyes
  • Wear gloves and goggles
  • Wash off splashes immediately with soap and water
  • Please refer to Material Safety Data Sheet for additional information
  • 402 Damp Proof Coating shall be applied strictly in accordance with the manufacturer’s instructions

For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]



Product Details
3342-916855

Data sheet

For Use By
Professional Use
For Use On
Concrete, Cement Screeds, Resin Screeds
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Pack Size
5KG, 15KG
Fully Cured (at 20°C)
14 Hours
Pot Life (at 20°C)
45 Minutes
Coverage
3-4m² per kg
Flexural Strength (at 20°C)
64 MPa
Max. Application Temperature
30°C
Min. Application Temperature
10°C
Shelf Life (from date of manufacture)
12 Months
Touch Dry
6 Hours
UN Number (Activator)
UN2735
UN Number (Base)
UN3082
Base Type
Solvent-Free
Suitable For Use On
Concrete
Suitable For Use On
Screeds
Finish
Gloss
Application Method
Brush
Application Method
Roller
Application Method
Spray
Components
2K
Usages
Anti-Slip
Usages
Damp Tolerant
Product Usage Type
Primer & Topcoat
Product Category
Paints
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Yellow
Colour Family
Black
Colour Family
White
Seasonal
Cold Weather
Product Type
Epoxy
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

402 Damp Proof Coating is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
5KG Pack

402 WG Damp Proof Coating

Developed to function as a rapid curing, residual construction moisture suppressant, to allow the early installation of moisture sensitive flooring in fast track building programmes. Designed to be used in lower temperatures or when rapid overcoating/access is required. Also available in 4,000+ colour options from RAL, BS and NCS Please...

Price £126.64 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
109 Tool Cleaner

109 Tool Cleaner

109 Tool Cleaner is a specialist equipment cleaner suitable for the removal of uncured epoxy, polyester and polyurethane resins. Low Hazard Low evaporation rate Excellent solvency powers 80% biodegradable This product is for Professional Use Only Images are for illustrative purposes only and may differ from the actual product More...

Price £53.06 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery