- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A Light Grey (RAL 7032), water-based, 2-pack primer with high filling and good anticorrosive properties, with good adhesion to a variety of substrates including Steel, Galvanised steel, Aluminium and Painted Surfaces.
- Fast drying and easy to apply - Can be used with Selemix waterborne 2-pack topcoats
- Recommended for use on industrial and agricultural equipment and machinery where a durable, low VOC or waterborne product is required
- This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
- Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or [email protected]
- For Professional Use Only
Please note: Colours shown are for illustrative purposes only
Selemix 5-8016 2K WB Epoxy Primer is a Light Grey (RAL 7032), water-based, 2-pack primer with high filling and good anticorrosive properties, with good adhesion to a variety of substrates including Steel, Galvanised steel, Aluminium and Painted Surfaces.
It is fast drying and easy to apply. It can be used with Selemix waterborne 2-pack topcoats.
This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener. This product can be purchased as a Base or Hardener separately only - please see the drop down menu above.
Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details.
Note: 1.959.8450 (9-450) Hardener must be properly shaken before use.
For Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- Water-based, 2-pack primer
- Good adhesion to a variety of substrates including Steel, Galvanised steel, Aluminium and Painted Surfaces
- It is fast drying and easy to apply
- It can be used with Selemix Waterborne 2-pack Topcoats
- This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
- Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or [email protected]
- For Professional Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Steel:
- Machine sand with P80-120 discs and degrease
Galvanised Steel:
- Abrade with SCOTCHBRITE® and degrease
Aluminium:
- Machine sand with P240-320 discs and degrease
Painted Surfaces:
- Machine sand with P240-320 discs and degrease
Mixing
- Thoroughly mix paint before activating and check colour before use
- This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
- Shake 9-450 Hardener well before use
Features | Conventional Spray | Air-Assisted Airless |
---|---|---|
By Weight: 5-8016 Primer 9-450 Hardener Water |
By Weight: 1000 170 230-250 |
By Weight: 1000 170 60-150 |
By Volume: 5-8016 Primer 9-450 Hardener Water |
By Volume: 5 1 1.15-1.25 |
By Volume: 5 1 0.3-0.75 |
Viscosity (at 20°C): |
30-40 secs DIN4 After mixing allow to stand for at least 5 minutes before checking viscosity |
>60 secs DIN4 After mixing allow to stand for at least 5 minutes before checking viscosity |
Pot Life (at 20°C): | 1.5-2 hours | 1.5-2 hours |
Mixing Ratio:
- Selemix 5-8016 2K WB Epoxy Primer
- 5 parts base : 1 part hardener
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant base and hardener/activator used.
Application Notes
Features | Conventional Spray | Airless Spray |
---|---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.6-1.8mm Suction: 1.8-2.0mm Pressure feed: 1.2-1.4mm |
Nozzle: 9-11 thou 0.23-0.28 mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2.5-3 Bar |
2-3 Bar |
Fluid Pressure: | N/A | 70-100 Bar |
Number of coats: | 2-3 medium | 1 Light Dry + 1 Full |
Flash-off between coats: | 15 mins minimum at 20°C or until matt | 15 mins minimum at 20°C or until matt |
Drying: | Air dry 5-6 hours or bake at 60°C for 50 mins | Air dry 5-6 hours or bake at 60°C for 50 mins |
Flash-off before bake: | 20 mins minimum at 20°C or until matt | 20 mins minimum at 20°C or until matt |
Wet Film Thickness: | 125-150 microns | 125-150 microns |
Dry Film Thickness: | 40-60 microns | 60-80 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 6.1-7.3 m² per litre at 50 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 15-20 min |
Touch Free | 2-3 hour |
Hard Dry | 24 hours |
Stoving | 50 minutes @60°C (according to film thickness) |
Overcoating time |
Minimum: After bake, or after a minimum 5-6 hours air dry (depending on film thickness drying temperature) Maximum: 72 hours without sanding on clean surface with any Selemix Waterborne 2K epoxy or polyurethane topcoats |
Please Note: Lower temperature or film thickness higher than 80µm will extend drying times. The drying times quoted are approximate times and will vary depending on drying conditions and film thickness. Poor ventilation, temperature below 20°C, humidity above 85% RH and excessive film thickness will extend the drying times. |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Professional Use
- Water / Solvent Based
- Water Based
- For Use On
- Steel
Galvanised Steel
Aluminium
Painted Surfaces - Sheen
- Matt
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 5 to 1
- Application
- Spray
Airless Spray - Pot Life (at 20°C)
- 1.5-2 Hours
- UN Number (Activator)
- UN3082
- UN Number (Base)
- UN3082
- Hard Dry
- 24 Hours
- Dust Dry (at 20°C)
- 15-20 mins
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Compatible Existing Coatings
- Substrate
- Steel
- Substrate
- Aluminium
- Substrate
- Painted / Primed Metal
- Usages
- High Corrosion Resistance
- Usages
- Low VOC
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Filling Properties
- Product Usage Type
- Primer
- Technologies
- Waterborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Airmix
- Application Methods
- Electrostatic
- Dry to Recoat (@ 20-25°C)
- 6 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 5-8016 2K WB Epoxy Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT