- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A two-component waterborne polyurethane light grey primer designed for protection of steel, aluminium and galvanised steel surfaces with full waterborne paint systems.
- Fast drying and easy to apply
- Suitable for use with Selemix waterborne or solventborne 2-pack topcoats, and can be used with the same hardeners as 8-110/8-111 Topcoat
- Recommended for use on industrial and agricultural equipment and machinery where a durable, low VOC or waterborne product is required
- This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
- Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or [email protected]
- For Industrial Use Only
Please note: Colours shown are for illustrative purposes only
Description
Selemix 5-8070 2K WB Polyurethane Primer is a two-component waterborne polyurethane light grey primer designed for protection of steel, aluminium and galvanised steel surfaces with full waterborne paint systems.
It is fast drying and easy to apply. It is suitable for use with Selemix waterborne or solventborne 2-pack topcoats, and can be used with the same hardeners as 8-110/8-111 Topcoat.
It is recommended for use on industrial and agricultural equipment and machinery where a durable, low VOC or waterborne product is required.
This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener. This product can be purchased as a Base or Hardener separately only - please see the drop down menu above.
Compatible Hardeners:
- 9-574 (Medium Hardener): Suitable from 15°C to 35°C (Large surfaces)
- 9-572 (Slow Hardener): Suitable from 35°C to 45°C (Large Surfaces)
- 9-110 (Medium Hardener for Acrylic): Suitable from 15°C to 25°C (Low VOC)
- 9-125 (Fast Curing Hardener for Acrylic): Suitable from 15°C to 25°C (Low VOC)
Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details.
For Industrial Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Surface Preparation
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- Water-based, 2-pack primer
- Fast drying and easy to apply
- Designed for protection of steel, aluminium and galvanised steel surfaces with full waterborne paint systems
- Suitable for use with Selemix waterborne or solventborne 2-pack topcoats, and can be used with the same hardeners as 8-110/8-111 Topcoat
- Recommended for use on industrial and agricultural equipment and machinery where a durable, low VOC or waterborne product is required
- This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
- Please ensure to refer to the Product Data Sheet for mixing ratios or please contact our Technical Department on 0113 2455450 (option 2) or [email protected]
- For Industrial Use Only
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Steel:
- Machine sand with P80-120 discs and degrease
Galvanised Steel:
- Abrade with SCOTCHBRITE® and degrease
Aluminium:
- Machine sand with P240-320 discs and degrease
GRP:
- Machine sand with P240 discs and degrease
Painted Surfaces:
- Machine sand with P240-320 discs and degrease
Mixing
- Thoroughly mix paint before activating and check colour before use
- This product MUST be purchased/used in conjunction with its manufacturer specified base or activator/hardener - Available as a Base or Hardener separately only
Compatible Hardeners (Choose from the menu above):
- 9-574 (Medium Hardener): Suitable from 15°C to 35°C (Large surfaces)
- 9-572 (Slow Hardener): Suitable from 35°C to 45°C (Large Surfaces)
- 9-110 (Medium Hardener for Acrylic): Suitable from 15°C to 25°C (Low VOC)
- 9-125 (Fast Curing Hardener for Acrylic): Suitable from 15°C to 25°C (Low VOC)
| Features 9-754/9-572 Hardeners | Conventional Spray | Air-Assisted Airless |
|---|---|---|
|
By Weight: 5-8070 Primer 9-574 / 9-572 Hardener Water |
By Weight: 1000 400 Thoroughly mix primer and hardener and then add: 150-250 water |
By Weight: 1000 400 Thoroughly mix primer and hardener and then add: 50-100 water |
|
By Volume: 5-8070 Primer 9-574 / 9-572 Hardener Water |
By Volume: 2 1 Thoroughly mix primer and hardener and then add: 0.3-0.5 (15-25%) |
By Volume: 2 1 Thoroughly mix primer and hardener and then add: 0.1-0.2 (5-10%) |
| Viscosity (at 20°C): |
30-40 secs DIN4 |
55-65 secs DIN4 |
| Pot Life (at 20°C): | 2 hours | 2 hours |
| Features 9-110/9-125 Hardeners | Conventional Spray | Air-Assisted Airless |
|
By Weight: 5-8070 Primer 9-110 / 9-125 Hardener Water |
By Weight: 1000 200 Thoroughly mix primer and hardener and then add: 150-250 water |
By Weight: 1000 200 Thoroughly mix primer and hardener and then add: 50-100 water |
|
By Volume: 5-8070 Primer 9-574 / 9-572 Hardener Water |
By Volume: 4 1 Thoroughly mix primer and hardener and then add: 0.6-1 (15-25%) |
By Volume: 4 1 Thoroughly mix primer and hardener and then add: 0.2-0.4 (5-10%) |
| Viscosity (at 20°C): |
20-30 secs DIN4 |
25-35 secs DIN4 |
| Pot Life (at 20°C): | 2 hours | 2 hours |
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant base and hardener/activator used.
Application Notes
| Features | Conventional Spray | Airless Spray |
|---|---|---|
| Spraygun Setup: |
Nozzle: Gravity: 1.8mm Suction: 1.8-2.0mm Pressure feed: 1.2-1.4mm |
Nozzle: 9-13 thou 0.23-0.33 mm |
| Air Pressure: |
HVLP: 2 Bar Standard: 2.5-3 Bar |
3-4 Bar |
| Fluid Pressure: | N/A | 90-100 Bar |
| Number of coats: | 2 medium | 1 Visit (1 light dry + 1 full) or 2 medium coats for higher build |
| Flash-off between coats: | 15 mins minimum at 20°C or until matt |
15 mins minimum at 20°C or until matt 5 mins for 1-Visit Application |
| Drying: | Air dry 5-6 hours or bake at 60°C for 50 mins | Air dry 5-6 hours or bake at 60°C for 50 mins |
| Flash-off before bake: | 30-45 mins minimum at 20°C or until matt | 30-45 mins minimum at 20°C or until matt |
| Wet Film Thickness: | 200-225 microns (2 coats) |
175-200 microns (1 visit) 200-225 microns (2 coats) |
| Dry Film Thickness: | 80-100 microns (2 coats) |
80-100 microns (1 visit) 100-140 (2 coats) |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 3-3.5 m² per litre at 100 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
| Drying Times 20°C | |
|---|---|
| Dust Free | 20-25 min |
| Touch Free | 4-6 hours (handleable 6-8 hours) |
| Hard Dry | 24 hours |
| Stoving | 20-30 minutes @60°C (according to film thickness and hardener selection) |
| Overcoating time |
Minimum: 4-6 hours (according to film thickness and hardener selection) Maximum: 72 hours without sanding on clean surface with any Selemix Waterborne 2K topcoats or 2K Selemix Solventborne 7-512 or 7-110 topcoats |
|
Please Note: Lower temperature or film thickness higher than 100µm will extend drying times. The drying times quoted are approximate times and will vary depending on drying conditions and film thickness. Poor ventilation, temperature below 20°C, humidity above 85% RH and excessive film thickness will extend the drying times. |
|
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR INDUSTRIAL USE ONLY
Product Details
9257-946799
Data sheet
- Manufacturer
- Selemix
- For Use By
- Industrial Use
- Water / Solvent Based
- Water Based
- For Use On
- Steel
Galvanised Steel
Aluminium
Painted Surfaces
GRP - Sheen
- Matt
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 2 to 1 (9-574 or 9-572 Hardener)
4 to 1 (9-110 or 9-125 Hardener) - Application
- Spray
Airless Spray - Pot Life (at 20°C)
- 2 Hours
- UN Number (Activator)
- UN1263 (All Hardener Options)
- UN Number (Base)
- UN3082
- Hard Dry
- 24 Hours
- Dust Dry (at 20°C)
- 20-25 mins
- Colour(s)
- Standard Colours
- Base Type
- Water-Based
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- GRP
- Suitable For Use On
- Compatible Existing Coatings
- Substrate
- Steel
- Substrate
- Galvanised Steel
- Substrate
- Aluminium
- Substrate
- Painted / Primed Metal
- Substrate
- GRP
- Usages
- High Corrosion Resistance
- Usages
- Low VOC
- Usages
- Atmospheric
- Product Usage Type
- Primer
- Technologies
- Waterborne
- Technologies
- 2K
- Application Methods
- Conventional
- Application Methods
- Airmix
- Application Methods
- Electrostatic
- Dry to Recoat (@ 20-25°C)
- 6 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 5-8070 2K WB Polyurethane Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT